Web Search: Goods

Hot Sellings
Your present location:Home >> Products >> Embedded Computer >> FCU1201 Embedded Computer
  • Application:
  • Platform: Cortex-A9
  • RAM: 1GB DDR3
  • Flash: 8GB eMMC
  • OS: Linux


FCU1201 embedded computer was designed based on NXP i.MX6DL processor with main frequency up to 1GHz, it has 1GB RAM and 8GB eMMC, integrates with RS485, CAN, ESAM, PSAM,USB, Ethernet, 4G, WIFI, LVDS, HDMI, DI, DO, audio and other peripherals, which make it's widely used in EV charger, advertising machine, vending machine, security, car electronics, industrial control, power communication applications.

It has below features

> Designed based on Freescale i.MX6Dual Lite processor, high performance, ultra low power;

> CPU is with native supporting and complying with ISO7816 protocol, users could work it with encryption module;

> Power failure safeguard to allow the system continue running for 15 seconds to avoid critical data loosing;

> On-board ready-to-use connectors: 4x DI, 4x DO, DI designed with photo coupler and wet node, users can change it to dry node optionally, DO designed with electromagnet relay protection ;

> 2x RS485, 2x CAN, all with electronical isolation protection, 1.5KV, ESD4

> supporting to 7'' LVDS display takes users execllent interactive performance;

>  standard mini HDMI interface, can support display options of 1080P, 720P and 480P;

> standard DB9 connector for debug port, which is very convenient for users to do debug testing and maintenance;

    Multiple communication types: on-board Ethernet (100M), WIFI&BT, 4G or GPRS modules;

    Standard SD card slot, compatible with SD, SDHC and SDXC card, capability up to 64G;

> Standard 3.5mm stereo earphone jack, builtin micphone, and users could also expand with 1Wx 2 speaker or 3.5mm single track micphone;

> LED indicators for system status monitoring: system running, network status and interface connecting status;

> TF card for system updating without dismantle the enclosure, or used for memory expanding;

 Wide voltage range: system running stable from 9V to 15V to avoid system failure by voltage fluctuation;

>. External case designed by aluminium alloy and the case is with mounting holes, dimensions with 147 x 103 x 42mm



 FCU1201 Embedded Computer


 Freescale i.MX6DualLite, ARM Cortex-A9, 1GHz





 External Memory

 Standard MicroSD card/ TF card interface, tested up to 64G

 Mobile Communication

 Huawei brand ME909S wireless module

 standard SIM card slot (with mark of 4G on enclosure) 


 ESAM chip is supported complying with ISO7816 protocol, we kindly provide reading and writing drivers, but the chip should be bought by users from a third party.


 PSAM card is supported, it was designed with a drawer style mini SIM card slot (it marked as 'SIM' on right side of the slot), we kindly provide reading and writing driver, but the card should be bought by users from a third party


 4x DO, electromagnetic relay isolation . contact rating: 1A 30V DC/0.5A, 125V AC/0.3A, 60V DC. Connector: green terminal bond with pitch of 3.81mm


 4x DI, photo coupler isolation, green terminal bond with pitch of 3.81mm, it's configured as direct current voltage input, voltage from 3V to 24V set to be high level and voltage below 1V DC set to be low level, it also could be set as internal isolated 5V power input and external dry contact

 Display Interface

 Standard DVI-I connector, Topway brand LMT070DICFWD-AKA LCD is supported by default 

 Mini HDMI  mini HDMI display connector





 Power Failure

 1x GPIO for external power supply mode detecting;

 When the FCU1201 mounted with LMT070DICFWD-AKA display only, the super capacitor can support system running at least for 15 seconds;

 mornitoring to inside 5V main power, when the voltage drops more than 10%, the whole device will be cut off to avoid software failure caused by over-low voltage

 UART (contains RS485)

 UART1: 3-wire debug port, DB9 connector, without isolation, it's marked as Console on case 

 UART3: it's converted in device to RS485-1, drawn out by green terminal bond, with electrical isolation

 UART4: it's converted in device to RS485-2, drawn out by green terminal bond, with electronical isolation

 UART5: RS232, 3-wire, green header, none-isolated protection


 1x USB 2.0 OTG, standard Micro USB connector

 1x USB 2.0 Host, standard USB A connector

 CAN Bus

 CAN1: CAN2.0 B, 1Mbps, with electronical isolation, it's used for communication with power charging controller

 CAN2: CAN2.0 B, 1Mbps, with electronical isolation, for backup


 standard RJ45 connector, 10M/100M adaptive, for connecting with supra system


 F23BUUM13-W2 module, IEEE 802.11b/g/n 1T1R WLAN and Bluetooth 2.1/3.0/4.0


 RX8010SJ chip, on-board RS232 battery, it could continue working for a year



 standard 3.5mm stereo earphone jack, built in single track micphone, users could also expand 1W x 2 speaker connctors or 3.5mm single track micphone jack (pad is preserved on PCB but without mounting hole on enclosure

 Reset  1x reset
 Boot  1x boot, used together with reset key to do system firmware updating


 Power Consumption

 Rated voltage: 12V, work normally between 9V to 15V, it's designed with reverse polarity protection

power consumption is below 5W if works with a Topway display LMT070DICFWD-AKA


 147.5mmx 100mm x 41.8mm

 Mounting Hole

 8crews Φ3mm

 Working environment

 RH: 5%~ 95%, none-condensing

 Working environment: 0℃~70℃(commercial grade), -40℃~70℃(industrial grade,except WIFI module)

 Storage: -40℃~85℃(WIFI module: -40℃~80℃)

 Item  Spec.
 OS Version  Linux3.0.35
 File System  Ext3
 GCC  4.6.2
 RS485  provided with demo
 RS232  provided with demo
 CAN  provided with demo
 Network Protocol  TCP/IP, UDP, DHCP, TFTP, FTP, Telnet, SSH, Web, HTTP, IPtables, SQLITE
 Ethernet  10M/ 100M/ 1000M, static/ dynamic IP allocation, MAC address modification
 4G Wireless  ME909S
 RTC  supported with NTP
 Watchdog  reset timing
 DI/ DO  4x DI, 4x DO
 Dual-screen  supported
 ESAM, PSAM  provided with demo
 TF card/ USB Storage  can support auto mounting
 OTG  flahs OS image or expand memory
 USB to serial port(4)  supported
 Audio  audio input and output

download attachments :