Hot Sellings
Your present location:Home >> Products >> TI Cortex-A8 AM335x >> SINGLE BOARD COMPUTER >> TI Sitara AM335x Cortex-A8 ARM Single Board Computer OK335xS with Dual Gigabit Ethernet Port
  • Application: Industrial control, rail transit, portable terminal, medical device, power system, environment morn
  • Platform:
  • RAM: 512M DDR3
  • Flash: 256M SLC NandFlash
  • OS: Linux, Win CE, Android

Messges

OK335xS single board computer integrates with TI AM335x processor and is the most simple and stable industrial development platform. Its main frequency reaches up to 800MHz, operating temp ranges from -40℃ to +85℃.And it support many industrial bus, such as: CAN, PROFIBUS, RS485, etc, support two gigabyte Ethernet port, 324-pin CPU module, each pin is multiplexed with up to 8 configured functions.FET335xS CPU modules have 512M DDR3 RAM and 256M Nandflash on it, could greatly help users to reduce the cost of product development.

OK335xS base board is specially designed for the industrial application, so RS485, CAN, and RS282 interfaces are available on the board for selection. Users could fully use PIN MUX to define functions on the base board. All boards must pass strict EMC/EMI test before leaving factory, could be directly applied into product manufacture.

Industrial grade SoM 

FET335xS system on module was designed based on AM3354 industrial grade processor which tested from -40℃ to +85℃

Communication ports are ready-to-use on carrier board

CPU module with 136 pins are all drawn out from CPU, supporting up to 6x UART, 2x CAN, 2x Gigabit Ethernet

Excellent multi-media performance

the CPU module FET335xS is supported with RGB 888 LCD, LCD to VGA display and LCD to LVDS display with resolution up to 1366*768. USB camera supported with picture preview, photo taking and video recording

Communication modules to make it more convenient to users

Carrier board pin diagrams

Displays with different sizes and interface types are optional

RGB LCD: 4.3'', 5'', 7'', 8'', 10.4''

LCD to VGA, 7'' LVDS display and 12'' LVDS display are all well supported

Expand modules to make convenience possible

SDIO WIFI module, TTL to RS232 module, TTL to RS485 module, LCD to VGA module, 3G/4G module are all available

Main Stream OS are all supported

single board computer OK335xS is supported with OS Linux3.2, Android2.3, Android4.2, WinCE7.0, Win CE6.0

OS running with multiple protection mechanism to allow the board to run stably

the SoM is supported with both hardware watchdog and software watchdog, OS Linux is supported with NAND Flash ECC

exclusively supporting of Uboot backup mechanism to make the system to run stably and smoothly

FET335xS Industrial CPU Module

CPU

TI Sitara AM335x Cortex-A8 processor

I2C

3-ch

Architecture

ARMv7 Cortex-A8

SPI

2-ch

Main Frequency

800MHz

CAN

1-ch

RAM

512M DDR3

USB HOST

1-ch USB HOST 2.0

FLASH

256M SLC Nandflash

USB DEVICE

1-ch USB DEVICE 2.0

Temp range

-40℃-+85℃

SD/MMC/SDIO

3-ch MMC

Humidity

10-90%(Non-condensation)

Ethernet

2-ch Gb Ethernet port

Input voltage

5V

UART/IrDA

6-ch

2D/3D

Support

EINT/GPIO

More than 20-ch

GPU

PowerVRSGX530

ADC

7-ch

PMU

TPS65217C

Video Encoder

Software codec

Size

52mm*42mm

JTAG

1-ch

Connection type

Half-hole soldering

EEPROM

Support (Only for Encryption)

OS

Linux3.2/Android4.2/WinCE7.0/WinCE6.0/StarterWare

PWM

2-ch (1-ch for backlight )

LCD

RGB24bit

SATA

None(Suppot USB to SATA)

Audio

IIS interface

 

 

 

OK335xS Industrial Base board

Audio

3-ch(1-ch phone,1-ch MIC,1-ch line in)

JTAG

1-ch

I2C

1-ch

ADC

5-ch (4-ch is for resistive touch, 1-ch is for slide rheostat)

SPI

1-ch

User key

5

CAN

1-ch

Boot switch

Set to boot from Nandflash or SD card

RS485

1-ch,multiplexed with Profibus

Reset

1

SD/MMC/SDIO

1-ch SD card

PWM

2-ch(1-ch is for LCD backlight,1-ch is for buzzer)

USB HOST

4-ch, support USB 2.0 protocol

LED

1-ch

USB DEVICE

1-ch, support USB 2.0 protocol

GPIO

More than 20-ch

Ethernet

2-ch gigabit Ethernet port

RTC

Support

Serial

4-ch (3-ch RS232, 1-ch TTL)

SATA

Support to connect with USB to SATA module

Input voltage

5V

GPS

Support to connect with external GPS module

LCD

1-ch, support resistive, capacitive touch screen; support LCD to VGA module, LCD to LVDS module

3G

Support external AD3812 module(USB)

Android2.3/4.2 OS

Android version

Android4.2

Kernel version

Linux-3.2.0

Flashing method

Flashing via one-key or single step-step operation

Cross compiler

arm-eabi-4.6 

Development environment

Ubuntu12.04.2

Drivers

Ethernet driver

Touch driver(capacitive and resistive)

LED driver

AD driver

LCD driver

RTC driver

USB2.0 driver

Audio driver(IIS interface)

Watchdog driver

Can driver

PWM driver(Backlight and buzzer)

RS485 driver

FlashECC

SPI driver

NandFlash driver

Serial driver

UBI file system

EEPROM driver

SD card driver

User key driver 

LCD FrameBuffer

 

 

 Linux3.2 OS

U-Boot version

u-boot-2011.09

Kernel version

Linux-3.2.0(open-sourced)
PSP version:04.06.00.10
SDK version:05.07.00.00

Flashing method

Flashing via one-key or single step-step operation

Development environment

Ubuntu12.04.2

Drivers

Ethernet driver(Dual1000M/100M) 

RTC driver

LED driver

Audio driver(IIS interface)

LCD driver

SPI driver

USB2.0 driver

Serial driver

PWM driver(Backlight and buzzer)

User key driver

FlashECC

EEPROM driver

NandFlash driver

Watchdog driver

UBI file system

AD driver

SD card driver

RS485 driver

LCDFrameBuffer

CAN driver

Touch driver(capacitive and resistive)

 

 

 WinCE6.0 OS

BootLoader

EBOOT SD card flashing

Flashing method

SD card flashing

CE version

WinCE6.0

PC development environment

VS2005

Drivers

LED driver

User key driver

GPIO driver

RTC driver

I2C driver

EBOOT driver

SPI driver

NAND Flash driver

Serial driver

LCD driver

Touch screen driver

Ethernet

SD card driver

USB driver

DMA driver

Backlight driver

Audio driver

AD driver

Watchdog driver

PWM driver

 

 WinCE7.0 OS

 

BootLaoder

EBOOT, support USB2.0 high-speed downloading

Flashing method

Flashing via one-key or single step-step operation

CE version

WinCE7.0

PC development environment

VS2005,VS2008

Drivers

LED driver

Watchdog driver

GPIO driver

USB2.0 driver

IIC driver

User key driver

SPI driver

EEPROM driver

Serial driver

PWM driver (Backlight and buzzer)

Audio driver

Can driver

NANDFlash driver

RS485 driver

LCD driver

AD driver

Touch screen driver(capacitive and resistive)

DMA driver

SD card driver

 

download attachments :