Web Search: Goods

Hot Sellings
Your present location:Home >> Products >> NXP Series >> SYSTEM ON MODULE >> i.MX RT1052 Cortex-M7 System on Module
  • Application:
  • Platform:
  • RAM: 16MB/ 32MB SDRAM
  • Flash: 4MB/ 16MB QSPI-NorFlash
  • OS: MCU/ uClinux


FET1052-C is an system on module designed based on NXP Cortex-M7 i.MX RT1050 series processor, the one we use is i.MX RT1052. It operates at speeds up to 528MHz to provide high CPU performance and best real-time response. The i.MX RT1052 processor has 512 KB on-chip RAM,which can be flexibly configured as TCM or general-purpose on-chip RAM. 16MB/ 32MB SDRAM, 4MB/ 16MB QSPI-NorFlash are optional on SoM FET1052-C.

The SoM FET1052-C is an industrial grade item with working temperature ranges from -40℃ to +85℃ and it has a compact appearance that dimensions only 31mm * 43mm, the SoM is designed with a couple of 80-pin connectors with pitch of 0.8mm, all 160pins of the processor are drawn out with GPIO up to 124 pins. Other peripheral pins such as UART, Ethernet, USB, CAN, PWM, ADC, LCD and CAMERA are all available. What's more, OS uClinux is supported very well.

High-performance, fast real-time response, low-power
SoM deliveries 3020 CoreMark/1284 DMIPS @ 528 MHz
512 KB on-chip RAM, fastest real-time response with latency as low as 20ns

Powerful scalability
All functional pins are available on the SoM with GPIO up to 124 pins;
LCD, camera, USB, UART, CAN, Ethernet and PWM are all native interfaces supported by this SoM
Multimedia performance
LCD interface with RGB888 is supported to 1366* 768 resolution and 2D GPU;
emWin, parallel camera interface and three IIS are all supported in MCU mode
Native data encryption
Various functional communication interfaces
Eight UART up to 5Mbps;
One 10/100M Ethernet controller with support for 1wip;
Two CAN 2.0 modules, Twenty 12-bit ADC;
Thirty two PWMs support for quadrature decoder and motor control
MCU system is supported with Keil IAR and ARM-GCC tools, meanwhile, Amazon FreeRTOS, SDK, ARM mbed, online development tools and other related global ARM system are supported for development.
Ubuntu and GCC are supported for development work on MPU
Compact size
The SoM dimensions are only 31mm* 43mm with designing of anti reverse board to board connectors, which is not only convenient for users to do testing and mass production but also easy for assembling

Industry/ Application


SoM FET1052-C Basic Information
 CPU  i.MX RT1052  Power Input  5V
 Architecture  Cortex-M7  Dimensions  31mm* 43mm
 Frequency  528MHz  Craftwork  thickness 1.6mm, 4-layer EING PCB
 RAM  SRAM: 512KB, SDRAM: 16MB/ 32MB  Connector  2* 80-pin, pitch of 0.8mm
 Flash  QSPI NorFlash: 4MB/ 16MB  Working Temp   -40℃ to +85℃


SoM FET1052-C Hardware Features
Interface QTY Spec.
 LCD 1  upto RGB888, resolution up to 1366* 768*(WXGA), 480*x 272 and 800* 480 are available
 Camera 1  8-bit DVP, up to 5.0Mp
 SD/ MMC/ SDIO ≤2  SD card or SDIO card with 1-bit or 4-bit mode
 USB 2  1x USB2.0 OTG(up to 480Mbps), 1x USB2.0 host, integrated with HS USB Phy
 SAI ≤3  up to 3x IIS audio
 SPDIF 1  Sony/ Philips digital audio interface
 UART ≤8  each up to 5.0Mbps
 SPI ≤4  full duplex enhanced sync. serial interface, up to 52Mbit/s, it could be configured to host/ device mode, four chip selections are available
 IIC ≤4  
 Ethernet ≤1  10M/ 100Mbps
 PWM ≤32  
 SWD supported  
 Keypad supported  8* 8
 QSPI 2  
 CAN ≤2  CAN2.0B
 ADC ≤20  2x 12-bit ADC, up to 20 input channels
 ISO7816-3 ≤2  
 SEMC BUS 1  16-bit parallel bus



FET1061-S VS FET1052-C
 Model FET1061-S FET1052-C
 Processor i.MX RT1061 i.MX RT1052
 SD/ MMC/ SDIO ≤2 ≤2
 USB 2 2
 SAI ≤2 ≤3
 SPDIF 1 1
 UART ≤7 ≤8
 eCSPI ≤3 ≤4
 IIC ≤4 ≤4
 Ethernet ≤2 ≤1
 PWM ≤26 ≤32
 SWD supported supported
 Keypad supported supported
 QSPI 1 2
 CAN ≤2 ≤2
 ADC ≤10 ≤20
 CANFD 1 -
 HS_GPIO 32 -
 LCD - 1
 Camera - 1


MCU Demos
 GPT  lpi2c: (RTC, EEPROM)
 Wdog  Bee
 Rtwdog  Sai
 Ewm  Lpspi
 Dcp  Enet
 Snvs  Flexspi
 Src  Sdcard
 Trng  Sdcard_fatfs
 Cache  Edma
 Flexcan  Tsc
 GPIO: LED shinning  Semc
 ADC  CSI: CMOS camera sensor
 Adc_etc  Elcdif
 Cmp  PXP
 Qtmr  Emwin
 Lpuart(UART2)  Flexram
uCLinux Demos
 Compiling environment buildup  Ethernet
 Compiling application  UART
 File system making  LED GPIO out
 TF card booting mode/ image flashing  User key
 Micro SD/ TF card  LCD FrameBuffer
 USB Host disk  TCS resistive touching
 USB OTG disk  RTC

Industry/ Application

download attachments :