FCU1201 Embedded Computer

CPU: i.MX6DualLite

Architecture: Cortex-A9

Frequency: 1.0GHz

RAM: 1GB DDR3

ROM: 8GB eMMC

System: Linux3.0.35+QT4.8.5

FCU1201 Embedded Computer

FCU1201 embedded computer was designed based on NXP i.MX6DL processor with main frequency up to 1GHz, it has 1GB RAM and 8GB eMMC, integrates with RS485, CAN, ESAM, PSAM,USB, Ethernet, 4G, WIFI, LVDS, HDMI, DI, DO, audio and other peripherals, which make it's widely used in EV charger, advertising machine, vending machine, security, car electronics, industrial control, power communication applications.


It has below features


> Designed based on Freescale i.MX6Dual Lite processor, high performance, ultra low power;


> CPU is with native supporting and complying with ISO7816 protocol, users could work it with encryption module;


> Power failure safeguard to allow the system continue running for 15 seconds to avoid critical data loosing;


> On-board ready-to-use connectors: 4x DI, 4x DO, DI designed with photo coupler and wet node, users can change it to dry node optionally, DO designed with electromagnet relay protection ;


> 2x RS485, 2x CAN, all with electronical isolation protection, 1.5KV, ESD4


> supporting to 7'' LVDS display takes users execllent interactive performance;


>  standard mini HDMI interface, can support display options of 1080P, 720P and 480P;


> standard DB9 connector for debug port, which is very convenient for users to do debug testing and maintenance;


Multiple communication types: on-board Ethernet (100M), WIFI&BT, 4G or GPRS modules;


Standard SD card slot, compatible with SD, SDHC and SDXC card, capability up to 64G;


> Standard 3.5mm stereo earphone jack, builtin micphone, and users could also expand with 1Wx 2 speaker or 3.5mm single track micphone;


> LED indicators for system status monitoring: system running, network status and interface connecting status;


> TF card for system updating without dismantle the enclosure, or used for memory expanding;


>  Wide voltage range: system running stable from 9V to 15V to avoid system failure by voltage fluctuation;


>. External case designed by aluminium alloy and the case is with mounting holes, dimensions with 147 x 103 x 42mm


▊ Spec.


Hardware Features
Interface Spec.
CPU NXP i.MX6Dual Lite  ARM Cortex-A9 i.MX6Dual Lite@ 1GHz
RAM DDR3  1GB
ROM eMMC  8GB
External Storage standard TF card slot, can support up to 64GB(tested)
Mobile Communication Huawei ME909S module: China Mobile 4G/3G/2G, China Union 4G/3G/2G, China Telecom 4G; standard SIM card slot(marked as 4G on enclosure)
ESAM ISO7816, driver provided, chip should be bought by users
PSAM drawer mini SIM card slot(marked as SIM on enclosure), drivered provided by Forlinx, card should be prepared by users
DO 4x DO, megical relay isolated, contact capability: 1A 30VDC / 0.5A 125VAC / 0.3A 60VDC, connector: green terminal bond with pitch of 3.81mm
DI

4x DI, photo coupler isolated, green terminal bond with pitch of 3.81mm; it's configured to DC voltage input by default, 3V~ 24V DC high levels and voltage below 1V DC low levels, it can also configured to internal isolated 5V

and external as dry contact only

Touch Screen standard DVI-I connector, LMT070DICFWD-AKA can be supported directly
Mini HDMI mini HDMI connector
Power Failure Solution CPU has one GPIO used for external power status monitoring; when the device is mounted with LMT070DICFWD-AKA only, the super capacitor can keep working for 15 seconds; when it detects internal 5V main power voltage drops more than 10%, the device will be powered off to avoid software failute caused by over-low voltage
UART(contains RS-485)

UART1: 3-wire serial, DB9 connector, non-isolated protectin, marked as Console on enclosure;

UART3: internally converted to RS-485-1, 1.5KV isolated protection, ESD4;

UART4: internally converted to RS-485-2, 1.5KV isolated protection, ESD4;

UART5: RS232, 3-wire, green terminal bond connector, non-isolated protection

USB 1x USB OTG, standard Micro USB connector, 1x USB Host, standard USB A connector
CAN BUS

CAN1: CAN2.0 B, 1Mbps, 1.5KV isolated protection, ESD4

CAN2: CAN2.0B, 1Mbps, 1.5KV isolated protection, ESD4

Ethernet standard RJ45 connector, 10M/100/1000M auto-negotiation
Wi-Fi& BT model F23BUUM13-W2, standard: IEEE 802.11b/g/n 1T1R WLAN and Bluetooth 2.1/3.0/4.0
RTC chipset: RX8010SJ; on-board CR2032, can keep running for one year
Audio 3.5mm standard stereo earphone jack with built-in single channel microphone; it can support to expand 1W×2 spearker connector or 3.5mm single channel microphone connector(PCB is preserved with related pad, but holes are not available on enclosure)
Reset Key 1x reset key, for system reset
Boot Key 1x boot key, it can work together with reset key for system firmware updating
Power and Consumption rated voltage: 12V, can support voltage input from 9V to 36V, with reverse polarity connecting protection, when it's mounted with LMT070DICFWD-AKA display, total consumption is 5.1W
Dimensions 100mm*147.5mm*41.8mm(L*W*H)
Mounting 8x Φ3mm screws
Working Environment RH: 5%~95%, non-condensing. Commercial grade: 0℃~70℃, industrial grade: -40℃~70℃(note: WIFI module working temperature: 0℃~70℃), storage temperature: -40℃~85℃(note: WIFI module storage temperature -40℃~80 )

Software Feature
Item Spec.
OS Linux-3.0.35
File System Ext3
GCC 4.6.2
RS485 provided with demo
RS232 provided with demo
CAN provided with demo
Network Protocols

TCP/IP, UDP,DHCP,TFTP,FTP,Telnet,SSH,Web,HTTP,IPtables,SQLITE

Ethernet

10M/100M/1000 auto-negotiation, can support static/ dynamic IP address and MAC address settings

WiFi can support STA and AP
4G Wireless Network

ME909S module, can support China Mobile, China Union, China Telecom 4G wireless network

RTC NTP is supported
Watchdog reset time settings
DI DO 4xDI,4xDO
Dual-screen Playing dual-screen playing asynchoronously
ESAM,PSAM provided with demo

TF card/ USB Storage

can support auto mounting
OTG

can be used for system installation and USB expanding

USB to quad-serial

supported
Audio can support audio record and playback


▊ Download


Brochure: Forlinx latest catalog

Hardware Manual: FCU1201 guideline







How to buy


Payment term: 100% payment in advance no matter sample orders or bulk purchasing orders.

1. Order Online

We have an online store on Alibaba, please contact us to start ordering

2. Western Union

Tell us which item and model you want to order, and we will send you a PI with Western Union account.

3. Bank Transfer(T/ T)

Tell us model and quantity, and we'll send you a PI with our company's bank account for payment.


Shipment


Payment term: 100% in advance

1. Delivery: Goods will be sent out by express as requested

2. Lead time: generally, goods could be sent out within five working days for a sample order, for a bulk requirement order, please contact us to check stock status and estimated delivery time.

3. Shipping charge: buyers should bear related shipping cost.