FET5718-C System on Module
FET5718-C is an SoM ( system on module) designed by Forlinx based on TI AM5718 SoC, and it has below features
★ ARM Cortex -A15, frequency up to 1.5GHz;
★ DSP C66x with frequency of 750MHz
★ 2x dul-core ARM Cortex-M4 with frequency of 213MHz;
★ 2x dual-core PRU with frequency of 200MHz;
★ High-speed transmission interfaces like USB 3.0, PCIe 3.0, HDMI 1.4, UART*10, QSPI*1, CAN*2, Gagibit Ethernet*2 are available and also powerful multi-media performance, wide range of applications;
★ OS options: Linux 4.9.41 + QT5.6, TI-RTOS;
★ 12-layer EINT PCB designing;
★ the development board consists of carrier board and SoM, and the carrier board designed with 4-layer PCB and SoM with 12-layer PCB;
★ carrier board dimensions of 130*190mm, and connector hight between SoM and carrier board is just 2mm
★ SoM with 320 pins that all functions of CPU are available;
★ Industrial grade temp width: -40℃ to +85℃
Demos including command line and QT demos such as OpenCV, OpenCL, OpenGL demos, and also DSP and PRU environment build up and development demos
Powerful Multi-media Performance
The development board is integrated with SGX544 3D and GC320 2D GPU which are applicable for senior graphic UI, meanwhile, Cortex-M4 GPU IPU2 is specially used in IVA image and video hardware codec
perfectly supports H.264, MPEG4 multiple encoding forms and video hardware decode playing, supports multiple video together with decoding playing, multiple decoding channels up to 1080P@60FPS, supports MJPEG iamge hardware codec, and also the VPE can well support hardware image, video zooming and color spacing converting.
Multiple Expanding Functions
Set LCD resolution and boot logo in UBOOT,
flash OS image just by an SD card, WIFI, MIPI camera , CPU frequency auto adjusting and appoint a fixed frequency
Availabe Demos
| TESTING DEMO | ||
|---|---|---|
|
Forlinx Demo BackLight Keypad RTC Network Ping DemoBrowser Calculato WatchDog Musicplayer Audiorecorder WIFI Terminal Can 4G |
ARM ralted DDR Bandwidth Memory Latency NBench Linpack Posix_SMP Communication Bandwidth Communication Latency Whetstone |
|
|
3D Chameleon KMS Cube Coverflow Navigation ExampleUI |
||
|
Multimedia IVAHD H.264 Decode VIP VPE IVAHD MPEG4 Encode and Decode Audio Capture H.265 (HEVC) Decode DSP C66 Image Processing AAC Decode IVAHD MJPEG Encode IVAHD H.264 Encode |
Settings Network Settings System Shutdown Task Info Refresh Matrix Memory atrix Shutdown system Info |
|
|
Video Analytics Demo OpenCV+OpenCL+OpenGL Demo |
||
|
USB USB Bonnie |
CPU frequency testing | |
| Command Line Testing | |
|---|---|
|
system information inquiry key testUART test Watchdog testWIFI test Screen shot test RTC test Temp sensor test CAN test USB mouse test USB2.0 test USB 3.0 test HDMI test |
LCD backlight adjusting camera testSD card test Ethernet test Web service test Audio record/ playback test Sobel test Facial recognition test PCIe test QSPI test 4G test SATA test SPI test BT test |
| Hardware Codec Testing | ||
|---|---|---|
|
Video playing VPE Gstreamer Video zoom Video amplication Color space converting |
Image codec MJPEG decode MJPEG encode |
|
|
Video codec H264 decode H264 encode MPEG4 decode MPEG4 encode |
||
| PRU Testing | ||
|---|---|---|
|
CSS tutorial CCS installation Install PRU to CCS PRU firmware start and stop Build new CCS |
TI official demo compiling and testing Import project Compile project Demo testing Start PRU |
|
|
Forlinx demo compiling and testing Import project Compile projectLED demo test UART test |
||
| DSP and IPU Testing | ||
|---|---|---|
| Multiple cores communication test | DSP test | |
| Re-compile testing demo by CCS | A15 application compiling | |
▊ Spec.
| Overview of FET5718-C System on Module | |||
|---|---|---|---|
| CPU | TI Sitara AM5718 | ||
| Architecture | Cortex-A15-1.5GHz | DSP-C66X-750MHZ | 2xDual Cortex-M4-213MHz |
| 2xDual-Core PRU-200MHz | PowerVR SGX544 3D GPU | Vivante GC320 2D GPU | |
| RAM | 1GB DDR3L | Flash/ Storage | 8GB eMMC |
| Dimensions | 50*70mm | Pakcage | board to board connector |
| PMU | TPS659162RGZR | Voltage Input | 5V |
| Working Temp Width | -40℃~+85℃ | RH | 10-90％RH non-condensing |
| OS | Linux4.9.41+ QT5.6+Wayland | ||
| FET5718-C System on Module Features | ||
|---|---|---|
| Peripheral | QTY | Spec. |
| LCD | ≤3 | GB888 24-bit |
|
HDMI |
1 |
HDMI 1.4a, 1080P@60Hz; 36-bit RGB display; HDCP 1.4 encryption; Deep color mode (10-bit, 12-bit color depth are both supported by pixel clock of 148.5MHz) |
|
CAMERA |
≤4 |
2x 8-bit DVP, up to 5.0MP
2x 8/ 16/ 24-bit DVP
|
|
MIPI CSI-2 |
2 |
CSI-2_PHY1: 1 clock lane+ 4 data lane
CSI2_PHY1: 1 clock lane+ 2 data lane |
|
SD/MMC/SDIO |
≤4 |
1-bit or 4-bit transferring mode is supported by SD and SDIO card with UHS-I SDR104 mode (up to 104MB/s)
SD/ MMC/ SDIO1: 4-bit data
SD/ MMC/ SDIO2: 8-bit data (used as eMMC on SoM)
SD/ MMC/ SDIO3: 8-bit data
SD/ MMC/ SDIO4: 4-bit data |
|
IIC |
≤5 |
IIC1/ 2: up to 400Kbps, standard OD
IIC3/ 4/ 5: up to 3.4Mbps, analogy OD
|
| HDQ1W | ≤1 |
Support TI/ Benchmarq HDQ master device function
Comply with Dallas 1-Wire protocol |
| UART | ≤10 |
can support 5/ 6/ 7/ 8 data bits, parity bit, 1, 1.5, 2 stop bits UART1: full serial interface is supported UART3: IrDA 1.4, CIR are supported others are standard interface |
| SPI | ≤4 |
up to 4x SPI, each with up to 4 master channel |
| QSPI | ≤1 |
work as master mode only
6 signal pins |
| McASP | ≤8 |
supports 8-ch audio at most
McASP1/2: up to 16 separate TX/ RX channel
McASP3-8: up to 4 separate TX/ RX channel |
| USB3.0 | ≤1 |
super speed USB3.0 Dual-Role-Device, Host is supported |
| USB2.0 | 1 |
high-speed USB 2.0 Dual-Role-Device, Host is supported |
| SATA | 1 | SATA Gen2 |
| PCIe | ≤2 |
PCI Express 3.0 subsystem, with 2x 5-Gbps channel
1x Dual-channel interface with GEN2 standard, 2x Single-channel intgerface with Gen2 standard |
| CAN | ≤2 |
two CAN controller at most, complys with CAN2.0 protocol |
| Ethernet | ≤2 |
3-port gigabit ethernet switch subsystem provides ethernet packet communication and can be configured as an ethernet switch. It provides two network ports and available for RGMII/ RMII/ MII interface, 10M/ 100M/ 1000M adaptive |
| PWMSS | ≤3 |
supports up to 3x PWMSS, each is available for:
eHRPWM: 16-bit timer, up to 2 separate PWM output
eCAP: 32-bit timer, one channel is special for input capture pin
eQEP: rotating decode unit |
| JTAG | supported | standard IEEE1149.1 |
| KeyPad Port | supported | 9*9 keyboard |
| GPMC | 1 |
8-bit/ 16-bit data bus width
up to 28-bit address bus
up to 8-bit chip selection bus |
▊
How to buy
Payment term: 100% payment in advance no matter sample orders or bulk purchasing orders.
1. Order Online
We have an online store on Alibaba, please contact us to start ordering
2. Western Union
Tell us which item and model you want to order, and we will send you a PI with Western Union account.
3. Bank Transfer(T/ T)
Tell us model and quantity, and we'll send you a PI with our company's bank account for payment.
▊ Shipment
Payment term: 100% in advance
1. Delivery: Goods will be sent out by express as requested
2. Lead time: generally, goods could be sent out within five working days for a sample order, for a bulk requirement order, please contact us to check stock status and estimated delivery time.
3. Shipping charge: buyers should bear related shipping cost.
▊ Recommended Single Board Computer
