FET3399-C System on Module

CPU: RK3399

Architecture: Heterogeneous

Frequency: 1.8GHz

RAM: 2GB DDR3

ROM: 16GB eMMC

System: Linux4.4.189+ QT5.12,Android7.1

FET3399-C System on Module


FET3399-C is a system on module designed based on Rockchip RK3399 processor which consists of two Cotex-A72 featuring cores with frequency up to 1.8GHz and four Cortex-A53 featuring cores with frequency up to 1.4GHz. It's integrated with GPU Mali-T864, can support OpenGL ES1.1/ 2.0/ 3.0/ 3.1, OpenVG1.1, OpenCL and DX11. It has on-board 2GB LPDDR3 RAM and 16GB eMMC. A variety of display interfaces such as HDMI2.0, MIPI-DSI, eDP1.3 and DP1.2 are all available and resolution up to 4K. Dual-screen both synchronous and asynchronous playing are well supported. Besides, it carries PCIe, USB3.0 Host, Type-C, MIPI-CSI, SPDIF, IIC, SPI, UART, ADC, PWM, GPIO, IIS(8 digital micphone array input) and Ethernet on board.

RK3399 system on module 2GB LPDDR3 RAM 16GB eMMC opengles open vg opencl rk3399 android7.1 optimized rkssd deep learning rk3399 4k vp9 h264 rk3399 four displays MIPI DSI, eDP, DP, HDMI rk3399 som cpu module RK3399 single board computer RK3399 development board rk3399 dual band wifi 5g wifi 2.4g wifi bt5.0 rk3399 development board with spi iic adc gpio usb2.0


Overview of SoM FET3399-C





CPU

RK3399 hexa-core, Big.Little architecture
Cortex-A72 Core:
• 2x Cortex-A72
• up to 1.8GHz
• 64-bit Armv8
Cortex-A53 Core:
• 4x Cortex-A53
• up to 1.4GHz
• 64-bit Armv8





GPU

3D graphical engine:
• quad-core Mali-T860MP4
• can support OpenGL ES1.1/2.0/3.0/3.1
• can support OpenCL 1.2

2D graphical engine:
• source form:
ARGB, RGB888, RGB565, RGB4444, RGB5551, YUV420, YUV422(SupportYUV422SP10bit/YUV420SP10bit)
• target form:
ARGB, RGB888, RGB565, RGB4444, RGB5551, YUV420, YUV422(SupportYVYU422/420 output)

• maximum resolution: source 8192x8192, and target 4096x4096









VPU

Decode:
• H.265/HEVC, up to 4Kx2K @ 60fps
• VP9, up to 4Kx2K @ 60fps
• H.264/AVC, up to 4Kx2K @ 30fps
• MPEG-1,ISO/IEC 11172-2, up to1080P @ 60fps
• MPEG-2,ISO/IEC 13818-2, up to 1080P @ 60fps
• MPEG-4,ISO/IEC 14496-2, up to 1080P @ 60fps
• VC-1, up to 1080P @ 60fps
• MVC based on H.264 or H.265, up to 1080P @ 60fps

Encode:
• 1080p30 AVC/H.264
• 1080p30 VP8

RAM

• 2GB(optional 4GB)
• LPDDR3  1600

ROM

• 16GB(optional 32GB)

• eMMC 5.1 storage
• HS400 mode

Working Temperature

0℃~80℃

Dimensions

46mm x 70mm

Voltage Input

12V

OS

Android 7.1、Linux*

▊ Functional Features

Functional Interface

Spec.

Display


dual-screen engine up to 4096x 2160 and 2560x 1600, can output from below ports:

MIPI-DSI ≤2
CPU has 3 built-in MIPI PHY, MIPI0 can be only used as DSI, MIPI1 can be used as DSI or CSI, MIPI2 can be only used as CSI


each DSI port has 4 data lanes, can support data transferring rate up to 6.0Gbps


each DSI port can support output up to 1080P@ 60FPS


MIPI0 and MIPI1 combination can support output 2560x 1600@ 60FPS

eDPx1
eDP V1.3


RGB 6/ 8/ 10-bit


4 data lanes, each 2.7/ 1.62Gbps


can support PSR

DP x1
Display Port V1.2


compatible with HDCP2.2(backward compatible with HDCP1.3)


only has one built-in DP controller, can output from Type-C*


support outputting up to 4Kx 2K@ 60Hz

HDMI x1
HDMI1.4, HDMI2.0


up to 18Gbps port trunks


up to 180P@ 120Hz, 4Kx 2K@ 60Hz, QXGA@ 120Hz


HDCP1.4/ 2.2


Audio

I2S/PCM x3
• I2S0/I2S2 can support 8-channel TX/RX. I2S1 can support -channel TX/RX
IIS2 internally connected to HDMI and DisplayPort, IIS0 and IIS1 are for peripherals
audio resolution from 16-bit to 32-bit
• sampling rate up to 192KHz
SPDIF
can support two 16-bit audio data stored in one 32-bit width location
can support two-phase formed stereo audio output
can support 16-bit to 31-bit audio data left or right justified in 32-bit width sampling data frame zone
can support 16-bit, 20-bit, 24-bit audio data transferring in PCM mode
can support none-PCM mode

Camera

MIPI CSI ≤2
•  can support one 13.0MP camera or two 8.0MP cameras
• two internal ISP
• one ISP with resolution up to 14.0 MP
USB UVC
• USB UVC camera input

USB
Type-C

USB Type-C x2(multiplexed with USB 3.0)
• USB Type-C 1.1
• can support USB3.0 Type-C and DP 1.2* can switch to USB Type-C mode
• USB3.0 up to 5Gbps
• DP1.2 up to 5.4Gbps(HBR2), can support 1/2/4 mode*
• DisplayPort with AUX channel*

USB OTG3.0

USB OTG 3.0 x2( contains USB OTG 2.0 x2)
• compatible protocol: USB 3.0、USB 2.0、USB Host 1.1
• USB 3.0 in full-duplex mode up to 5Gbps band width

USB 2.0

USB 2.0 Host x2(separated, not multiplexed with 3.0)
• compatible with USB 2.0
• can support high speed mode(480Mbps), full speed mode (12Mbps) and low speed mode(1.5Mbps)

SD/MMC

SD/MMC x2
• can be configured to SD/MMC or SDIO
• compatible with SDIO 3.0
• 4-bit data bus

Ethernet

• Gigabit Ethernet x1
• RGMII is available for 10/100/1000-Mbps
• RMII is available for 10/100-Mbps

SPI

SPI x5
• can support serial host and slave mode, software configurable
• operation based on DMA or interrupt
• TX and RX are 32x16-bit FIFO

UART

UART x5
• operation based on DMA or interrupt
• TX and RX are 64Bytes FIFO
• each serial up to 4.0 Mbps

I2C

I2C x7
• multi-host machine I2C
• standard mode up to 100 kbit/s
• fast mode up to 400 kbit/s

PCIe

PCIe x 1
• compatible with PCI Express revised 2.1
• 4 full-plex channel
• each channel can support 2.5GT/s to each direction
• dual-operation mode: Root Complex(RC) and End Point(EP)

PWM

PWMs x 3
• operation based on interrupt
•32-bit timer/ counter
• can support capture mode
• can support continuous mode or one-time mode

ADC

ADC x 5
• successive approaching ADC
•10-bit
• switch rate up to 1MS/ s for sampling




▊ Download


Brochure: Forlinx latest catalog

Hardware Manual: OK3399-C/ FET3399-C Hardware Manual

How to buy


Payment term: 100% payment in advance no matter sample orders or bulk purchasing orders.

1. Order Online

We have an online store on Alibaba, please contact us to start ordering

2. Western Union

Tell us which item and model you want to order, and we will send you a PI with Western Union account.

3. Bank Transfer(T/ T)

Tell us model and quantity, and we'll send you a PI with our company's bank account for payment.


Shipment


Payment term: 100% in advance

1. Delivery: Goods will be sent out by express as requested

2. Lead time: generally, goods could be sent out within five working days for a sample order, for a bulk requirement order, please contact us to check stock status and estimated delivery time.

3. Shipping charge: buyers should bear related shipping cost.