NXP LS1012A based System on Module FET1012A-C
FET1012A-C is a system on module(SoM) designed based on NXP Cortex -A53 featuring processor LS1012A@ 800MHz. It consists of carrier board and SoM and integrates with multiple high-speed peripherals include gual gigabit Ethernet PHYs with hardware packet acceleration engine, SATA3.0, PCIe2.0, USB3.0, TF card and other interfaces. It's specially supported with Ubuntu and OpenWRT and aimming at NAS, IoT gatway. broadband Ethernet gateway and industrial automation markets.
Superior Network Performance
Powerful Scalability
One PCIe2.0 controller up to 5.0Gbps with powerful scalability for Gagibit Ethernet, dual-band WIFI and other high-speed peripherals
Variable High-Speed Peripherals
2.5Gbps Ethernet, PCIe2.0, SATA3.0, USB3.0
OS Supporting
Lower-power Performance
SoM designed as 8-layer PCB EING with ultra thin(only 2mm for hight) connectors from Panoasic, transmission rate up to 6Gpbs, pins with EING designing make it excellent powerformance for anti-oxidation and stable connection
Comp act Size
Connector only 2mm in hight, SoM with compact dimensions of 45x 40mm, and mounting hight only 5.6mm
Target Applications
▊ Hardware Features
| Overview of FET1012A-C System on Module | |||
|---|---|---|---|
| CPU | NXP LS1012A | ||
| Architecture | Cortex-A53 | MainFrequency | ≤1GHz |
| RAM | 512MB DDR3L | ROM | 8GB eMMC ；16MB QSPI NorFlash |
| OS | Ubuntu/OpenWrt | Voltage Input | 4.2V |
| Package | board to board connector | ||
| Working Temp Width | -40℃~ +80℃ | Dimensions | 45mm*40mm |
| FET1012A-C System on Module Features | ||
|---|---|---|
| Peripheral | QTY | Spec. |
| Ethernet | ≤2 |
CPU can support one RGMII up to 1Gbps
two 2.5Gbps SGMII configurable by SerDes
CPU has two native MAC, dual gigabit Ethernet controllers are available
|
| PCIe2.0 | ≤1 | up to 5Gbps |
| SATA3.0 | ≤1 | up to 6Gbps |
| USB3.0 | 1 | up to 5Gbps |
| QSPI | 1 | used by QSPI nor flash on SoM |
| SAI | ≤5 |
|
| UART | ≤2 | |
| IIC | ≤2 | |
| SDHC | ≤2 | one is used by eMMC |
| JTAG | 1 | NXP CodeWarrior TAP |
Note1：SGMII, PCIe and SATA can be configured by SerDes, Forlinx configuration solution is SGMII(1G)+PCIex1+SATA3.0, others please refer to below chart
| SerDes | ||
|---|---|---|
| 1 | 2 | 3 |
| Unused | PCI Express（x1） | |
| sg.m1（2.5G） | sg.m2（2.5G） | SATA |
| Unused | SATA | |
| sg.m1（1G） | PCI Express（x1） | SATA |
| sg.m1（1G） | sg.m2（1G） | PCI Express（x1） |
| sg.m1（2.5G） | sg.m2（2.5G） | PCI Express（x1） |
| sg.m1（2.5G） | sg.m2（1G） | PCI Express（x1） |
| TX_CLK | PCI Express（x1） | SATA |
| sg.m1（1G） | TX_CLK | PCI Express（x1） |
| TX_CLK | sg.m2（1G） | PCI Express（x1） |
▊ Software Features
| Linux Ubuntu | ||
|---|---|---|
| Cross-compiler | aarch64-linux-gnu-gcc | Ubuntu/Linaro 7.3.0-16ubuntu3~18.04, glibc-2.27, binutils-2.30-0, gdb-8.1 |
| System Flashing | speficied flash tool to flash image to QSPI Flash | |
| flash OS image by U-disk | ||
| UBoot | version: Uboot-2018.03 | |
| can support device tree | ||
| TFTP, NFS are supported | ||
| U-disk, eMMC, TF card, QSPI Flash device are supported | ||
| MAC setting and saving | ||
| Linux Kernel | Version: Linux-4.14.47 | |
| File system | EXT4/NFS/FAT32, etc. | |
| eMMC | HS200 mode | |
| TF card | DDR50 mode | |
| Watchdog | ||
| RTC | Rx8010 | |
| IO | ||
| QSPI | 4-wire mode high-speed reading and writing | |
| PCIE |
WLE900VX WIFI module RTL8111F Gigabit Ethernet module |
|
| USB 3.0 | U-disk, USB Hub, USB keyboard and mouse, etc. | |
| TMU | LS1012 internal temp sensor | |
| UART | ||
| Ethernet(1000/100/10Mbps) | ||
| SATA |
|
|
| Ubuntu File System | Version: ubuntu-18.04.1 | |
| Samba | ||
| Lighttpd | ||
| Docker | ||
| LXC | ||
| QEMU | ||
| OP-TEE OS | ||
| OpenSSL | ||
| IPSEC | ||
| Linux OpenWrt | |
|---|---|
| Linux Kernel | Version: Linux- 4.9.111 |
| Openwrt | Version: v18.06.0-rc2（kernel version: 4.9.111） |
|
Source Pack and Version |
ath10k-firmware-qca988x_2018-04-19-71e50312-1 base-files_190-r7141-e4d0ee5af5 block-mount_2018-04-16-e2436836-1 busybox_1.28.3-4 dnsmasq_2.80test2-3 dropbear_2017.75-5 ethtool_4.15-1 firewall_2018-05-14-b45e162e-1 fstools_2018-04-16-e2436836-1 fwtool_1 hostapd_2018-04-09-fa617ee6-5 hostapd-common_2018-04-09-fa617ee6-5 iperf_2.0.10-1 iperf3_3.5-1 iw_4.14-1 jshn_2018-04-12-6eff829d-1 jsonfilter_2018-02-04-c7e938d6-1 kernel_4.9.111-1-ced49591dc966c9bc9acb816df322464 kmod-ath10k_4.9.111+2017-11-01-9 kmod-ath_4.9.111+2017-11-01-9 kmod-cfg80211_4.9.111+2017-11-01-9 kmod-dma-buf_4.9.111-1 kmod-input-core_4.9.111-1 kmod-ipt-conntrack_4.9.111-1 kmod-ipt-core_4.9.111-1 kmod-ipt-nat_4.9.111-1 kmod-mac80211_4.9.111+2017-11-01-9 kmod-nf-conntrack_4.9.111-1 kmod-nf-conntrack6_4.9.111-1 kmod-nf-ipt_4.9.111-1 kmod-nf-nat_4.9.111-1 kmod-nf-reject_4.9.111-1 kmod-nls-base_4.9.111-1 kmod-ppfe_4.9.111-1 kmod-scsi-core_4.9.111-1 kmod-usb3_4.9.111-1 kmod-usb-core_4.9.111-1 kmod-usb-dwc3_4.9.111-1 kmod-usb-storage_4.9.111-1 kmod-video-core_4.9.111-1 kmod-video-uvc_4.9.111-1 kmod-video-videobuf2_4.9.111-1 layerscape-ppa-ls1012ardb_2018-01-18-cd295be2-1 layerscape-ppfe_2017-12-05-848002fe-1 libblobmsg-json_2018-04-12-6eff829d-1 libc_1.1.19-1 libgcc_7.3.0-1 libip4tc_1.6.2-1 libip6tc_1.6.2-1 libiwinfo_2018-02-15-223e09bf-1 libiwinfo-lua_2018-02-15-223e09bf-1 libjpeg_9a-1 libjson-c_0.12.1-1 libjson-script_2018-04-12-6eff829d-1 liblua_5.1.5-1 liblucihttp_2018-05-18-cb119ded-1 liblucihttp-lua_2018-05-18-cb119ded-1 libnl-tiny_0.1-5 libpthread_1.1.19-1 libubox_2018-04-12-6eff829d-1 libubus_2018-01-16-5bae22eb-1 libubus-lua_2018-01-16-5bae22eb-1 libuci_2018-03-24-5d2bf09e-1 libuclient_2017-11-02-4b87d831-1 libxtables_1.6.2-1 logd_2018-02-14-128bc35f-2 lua_5.1.5-1 luci-app-firewall_git-18.196.56128-9112198-1_all luci-app-mjpg-streamer_git-18.196.56128-9112198-1_all luci-app-samba_git-18.196.56128-9112198-1_all luci-base_git-18.196.56128-9112198-1 luci_git-18.196.56128-9112198-1_all luci-i18n-base-en_git-18.196.56128-9112198-1_all luci-i18n-base-zh-cn_git-18.196.56128-9112198-1_all luci-i18n-firewall-en_git-18.196.56128-9112198-1_all luci-i18n-firewall-zh-cn_git-18.196.56128-9112198-1_all luci-i18n-mjpg-streamer-zh-cn_git-18.196.56128-9112198-1_all luci-i18n-samba-en_git-18.196.56128-9112198-1_all luci-i18n-samba-zh-cn_git-18.196.56128-9112198-1_all luci-lib-ip_git-18.196.56128-9112198-1 luci-lib-jsonc_git-18.196.56128-9112198-1 luci-lib-nixio_git-18.196.56128-9112198-1 luci-mod-admin-full_git-18.196.56128-9112198-1 luci-proto-ipv6_git-18.196.56128-9112198-1_all luci-proto-ppp_git-18.196.56128-9112198-1_all luci-theme-bootstrap_git-18.196.56128-9112198-1_all luci-theme-freifunk-generic_git-18.196.56128-9112198-1_all luci-theme-material_git-18.196.56128-9112198-1_all luci-theme-openwrt_git-18.196.56128-9112198-1_all mjpg-streamer_r182-10 mtd_21 netifd_2018-05-30-a580028d-1 openwrt-keyring_2018-05-18-103a32e9-1 opkg_2017-12-07-3b417b9f-2 procd_2018-03-28-dfb68f85-1 rcw-layerscape-ls1012ardb_2017-11-19-bf3ae3cb-1 rpcd_2018-05-13-82062195-1 rpcd-mod-rrdns_20170710 samba36-server_3.6.25-10 ubi-utils_2.0.2-1 ubox_2018-02-14-128bc35f-2 ubus_2018-01-16-5bae22eb-1 ubusd_2018-01-16-5bae22eb-1 uci_2018-03-24-5d2bf09e-1 uclibcxx_0.2.4-3 uclient-fetch_2017-11-02-4b87d831-1 uhttpd_2018-06-26-796d42bc-1 uhttpd-mod-ubus_2018-06-26-796d42bc-1 usign_2015-07-04-ef641914-1 wireless-regdb_2017-10-20-4343d359 wpa-supplicant_2018-04-09-fa617ee6-5 |
▊
How to buy
Payment term: 100% payment in advance no matter sample orders or bulk purchasing orders.
1. Order Online
We have an online store on Alibaba, please contact us to start ordering
2. Western Union
Tell us which item and model you want to order, and we will send you a PI with Western Union account.
3. Bank Transfer(T/ T)
Tell us model and quantity, and we'll send you a PI with our company's bank account for payment.
▊ Shipment
Payment term: 100% in advance
1. Delivery: Goods will be sent out by express as requested
2. Lead time: generally, goods could be sent out within five working days for a sample order, for a bulk requirement order, please contact us to check stock status and estimated delivery time.
3. Shipping charge: buyers should bear related shipping cost.
▊ Recommended single board computer
