System on Module FETMX6UL-C2 based on i.MX6UL
FETMX6UL-C2 is an industrial grade SoM based on NXP i.MX6 Ultra Lite microcontroller belongs to Cortex-A7 and is with main frequency of 528MHz, 256MB LvDDR3 and 256MB NAND Flash, the CPU module is with a couple of board-to-board connectors each with 80pins. Unique PMU design makes it lower power consumption than ARM 9 products. It's approved to work stably under environment temp ranges from -40℃ to +85 ℃.
FETMX6UL-C2 SoM Size
Length and width are only 40mm*50mm, 6-layer PCB immersion gold technology, two sets of high-quality anti-misplug board-to-board connectors
Low Power System on Module
Compared with the ARM9 and ARM11 series system on module, the power consumption of the FETMX6UL-C SoM is reduced by 50%.
8 serial ports, 2 network ports, 2 CAN
The industry supports the CPU with the largest number of serial ports, as well as 2 dual-redundant networks and 2 high-real-time CAN buses.
Industrial-grade System on Module
Media player, digital camera
Onboard IIS interface, WM8960 audio chip, any music and song playback, support digital camera OV9650
Security encryption double protection
Single encryption: CPU comes with a safe boot anti-theft mechanism, which can prevent third-party users from arbitrarily brushing the machine and implanting Trojan horse viruses to steal user information;
double encryption: CPU comes with ISO7816 third-party authentication encryption interface, making transactions more secure
The multi-function pin configuration is more flexible, and the limit configuration is up to you!
Convenient to design various functional configuration boards, so that the industry is no longer limited
Multiple certifications
▊ OKMX6UL-C2 Development Board
OKMX6UL-C2 is a development kit of i.MX6UL, consisting of a carrier board and an SoM FETMX6UL-C2, can serve both as a development platform and an end product. Small in size and flexible configuration, onboard LCD, Ethernet, USB host/OTG, RTC, SD card, and LED are all available.
Forlinx kindly provides related optional modules for OKMX6UL-C2 single board computer/ development kit testing, such as 4.3 inch Resistive LCD Module, 7.0-inch LCD Module with MIPI display, 7.0-inch TFC LCD Module with Capacitive Touch Panel, 7.0-inch TFT LCD Module with Resistive Touch Panel, 10.1-inch LVDS Display with Capacitive Touch Panel, etc.
▊ Hardware Features
| FETMX6UL-C2 System on Module Features | |
|---|---|
| CPU | NXP i.MX6UL |
| Architecture | Cortex-A7 |
| Frequency | 528MHz |
| RAM | 256MB DDR3 |
| Flash | 256MB NandFlash(1GB NandFlash optional) |
| Voltage Input | 5V |
| GPU | PXP |
| Dimensions | 50mm* 40mm |
| Package | board to board connector |
| OS | Linux3.14.38+QT4.8 |
| LCD | RGB 24-bit |
| Audio | 3x audio |
| I2C | 4x IIC |
| SPI | 4x SPI |
| QSPI | 1x QSPI |
| CAN | 2x CAN |
| USB | 2x USB |
| SD/MMC/SDIO | 2x SD/ MMC/ SDIO |
| Ethernet | 2x 10/100M Ethernet |
| UART/IrDA | 8x UART/ IrDA |
| EINT/GPIO | supported |
| Video Coder | software codec |
| EBI BUS | supported |
| JTAG | supported |
| Camera | 1x 5.0MP parallel |
| PWM | 8x PWM |
| ADC | 10x ADC |
| ISO7816-3 | 2x ISO7816-3 |
| Keypad Port | 8*8 |
| SPDIF | 1x SPDIF |
▊ Software Features
| OS Linux | ||
|---|---|---|
| OS | Linux-3.14.38+ Qt4.8.5 | Linux-4.1.15+ Qt5.6(only supported by the one with 1GB NandFlash) |
| Compiler | arm-fsl-linux-gnueabi-gcc-4.6.2 | arm-poky-linux-gnueabi-gcc gcc-5.3.0 |
|
OS Flashing |
flash OS image by SD card, USB OTG |
flash OS image by SD card, USB OTG |
| flash single/ multiple files |
flash single/ multiple files |
|
| can support yaffs file system |
can support ext3/ yaffs file system |
|
| UBOOT | booting mode(eMMC/SD/USB OTG/NAND) | booting mode(eMMC/SD/USB OTG/NAND) |
| RAM(256M) | RAM(256M) | |
| UBOOT LOGO | UBOOT LOGO | |
|
Linux Kernel |
Version: Linux-3.14.38 | Version: Linux-4.1.15 |
| file system: EXT3/NFS/FAT32/NTFS | file system: EXT3/NFS/FAT32/NTFS | |
| eMMC driver(8G/4G) | eMMC driver (8G/4G), nandflash（1G） | |
| watchdog driver | watchdog driver | |
| RTC driver | RTC driver | |
| IO driver | IO driver | |
| I2C driver | ||
| SPI driver | SPI driver | |
| wifi driver | wifi driver | |
| camera driver | camera driver | |
| PWM driver | PWM driver | |
| LCD backlight driver, 255-rating | LCD backlight driver, 255-rating | |
| LCD driver | LCD driver | |
| USB Host driver: U-disk, USB Hub, USB keyboard, mouse | USB Host driver: U-disk, USB Hub, USB keyboard, mouse | |
| USB Device driver | USB Device driver | |
| TF/SD/MMC card driver: up to 32GB | TF/SD/MMC card driver: up to 32GB | |
| UART driver | UART driver | |
| WM8960 audio driver: record/ playback | WM8960 audio driver: record/ playback | |
| Ethernet(RJ45, 100/10Mbps) | Ethernet(RJ45, 100/10Mbps) | |
| 3G/4G driver | 4G driver | |
| USB to serial driver | ||
|
Testing APP |
WIFI configution toold | WIFI configution toold |
| Telnet | Telnet | |
| RTC | RTC | |
| Flexcan | Flexcan | |
| IP/Mac address setting | IP/Mac address setting | |
| Sqllite | Sqllite | |
| TTL to RS232 | TTL to RS232 | |
| audio record/ playback(ALSA) | audio record/ playback(ALSA) | |
| GPRS wireless network | GPRS wireless network | |
| 3G/4G wireless network | 4G wireless network | |
| USB camera testing | USB camera testing | |
| Speaker testing | Speaker testing | |
| RGB backlight adjusting | RGB backlight adjusting | |
| video playing and mp4 file testing | video playing and mp4 file testing | |
| watchdog testing | watchdog testing | |
| MMC/TF/SD card and U-disk auto-mounting and uninstalling | MMC/TF/SD card and U-disk auto-mounting and uninstalling | |
| FTP | FTP | |
| Boa Web Server |
|
|
▊ Accessories
Provides the modules and accessories used in Forlinx's SBC.
See here for communication modules, Evaluation Kit, LCD screen, SBC expansion module and further accessories »
Technical Support
Forlinx provides software resources including kernel and driver source code, together with detailed user manual, schematic documentations to help customer start their development rapidly.
For more details on solution design with i.MX6UL/6ULL SOM
▊ Design Service
1. Hardware Designing
Provide carrier board, core board, industry product custom, etc. Read More+
2. Hardware Related Software Custom
Provide software custom service including kernel cutting, driven development, and system transplantation. Read More+
▊ How to buy
1. Order Online
We have an online store on Alibaba, please contact us to start ordering
2. Order offline
pls send your inquiry to our mailbox [email protected];
3. Payment Terms
Samples(100% T/T in advance),Bulk Order(please contact with our sales)
▊ Shipment
1. Delivery: Goods will be sent out by express as requested
2. Lead time: generally, goods could be sent out within five working days for a sample order, for a bulk requirement order, please contact us to check stock status and estimated delivery time.
3. Shipping charge: buyers should bear related shipping cost.
▊ Related News
- LoRa Base Station Solution based on SoM FETMX6UL-C2
- Fluorescence Immunoassay Solution Based On FETMX6UL-C Embedded SoM
- Central Air Conditioning Concentrator Based on FETMX6UL-C Core Board
- Data Acquisition Based on NXP i.MX6UltraLite
- About the Application of Forlinx FETMX6UL-C Core Board in RFID RF Technology
- Smart Traffic Light Based on RK3399/iMX6UL SoM
▊ Other Forlinx iMX6 Series Products
Architecture: Cortex-A7
Frequency: 800MHz
RAM: 512MB DDR3
ROM: 8GB eMMC
System: Linux4.1.15+QT5.6
Architecture: Cortex-A9
Frequency: 1.0GHz
RAM: 1GB DDR3，2GB DDR3(optional)
ROM: 8GB eMMC
System: Linux3.0.35+QT4.8.5，Linux4.1.15+QT5.6，Android4.2，Android6.0
Architecture: Cortex-A9
Frequency: 1.0GHz
RAM: 1GB DDR3，2GB DDR3(optional)
ROM: 8GB eMMC
System: Linux3.0.35+QT4.8.5，Linux4.1.15+QT5.6，Android4.2，Android6.0
Architecture: Cortex-A7
Frequency: 528MHz
RAM: 256MB DDR3
ROM: 256MB NandFlash，1GB NandFlash
System: Linux3.14.38+QT4.8.5，Linux4.1.15+QT5.6
