Allwinner A40i based System on Module FET A40i -C
FETA40i-C is a system on module designed based on Allwinner Cortex -A7 quad-core industrial grade processor A40i with frequency up to 1.2GHz, it integrates with GPU MALI400MP2, RAM 1GB/ 2GB DDR3L and 8GB eMMC. Mostly popular video and iamge encode forms are perfectly supported. It is a superior item with advantages of excellent performance in industrial grade stability but low power and cost effcient performance. Supported with OS Linux and Android systems, applicable for industrail control vision interactive products, such as smart terminals, industrial control , data collection, machine vision, industrial IoT, portable devices, digital signage, etc.
The SoM has below features:
● Allwinner Cortex -A7 industrial grade quad-core processor A40i, frequency up to 1.2GHz, integrated with Mali400MP2 GPU;
● Supports dual-screen displaying both sync. and async, various display interfaces RGB/ MIPI/ dual 8-bit LVDS/ HDMI/ TV out are all support and available for 1920x 1080@ 60FPS;
● One Gigabit Ethernet and one fast Ethernet are supported and available for WIFI/ BT4.0, 4G is also supported;
● Can support multiple camera inputs, 2-ch DVP camera s up to 5.0MP, 4-ch TVIN can support NTSC and PAL;
● CPU integrates with audio codec, can support one differential PHONEOUT, one stereo earphone output, and one microphone input;
● Various peripherals: UARTx 8, SDx 4, USBx 3, SPIx 4, IICx 5, SATAx 1, PWMx 8;
● Supports OS Linux and Android
Allwinner Cortex-A7 A40i
Cost efficient, expand commercial grade and industrial grade optional,
superior product performance in stability
SoM 10-layer ENIG PCB designing
SOM FETA40i-C is based on a 10-layer PCB designin g
Stereo timbre
high-definition output
and multiple hardware video codec forms. The processor is built in with audio coder.
A wide range of peripherals
The SoM is scalable form one Gigabit Ethernet, one fast Ethernet, eight UART,
four SD, three USB, four SPI, five IIC, eight PWM, one SATA and two ISO-7816 interfaces
Multiple video capture channels
5.0MP DVP OV5640 camera is supported,
four CVBS-IN analog cameras can be supported syncronously
in NTSC and PAL forms for video recording and previewing
Versatile power solutions
The SoM is specially designed with low-power PMU AXP221s for precisely control of complex power,
and available for external power mode, Li-ion power mode and USB power mode.
Optimized system supporting
The SoM is supported with optimized Linux3.10 with QT5.9
Certificate
Complies with CE, FCC and RoHS
OKA40i-C SBC Pin Diagram
OKA40i-C single board computer consists of SoM FETA40i-C and carrier board
▊ Hardware Features
Overview of FETA40i-C System on Module | |||
---|---|---|---|
CPU | Allwinner A40i | Architecture | ARM Cortex-A7 |
Main Frequency | 1.2GHz | Core Number | 4 |
RAM | 1GB /2GB DDR3 | Flash | 8GB eMMC |
Dimensions | 68*45mm | Package | board to board connector |
PMU | AXP221S | Voltage Input | DC4.2V |
Working Temp Width |
Industrial grade: -40℃~+85 Expand commercial grade: -25℃~ +85℃ |
RH | 10-90%RH non-condensing |
OS | Linux3.10、QT5.9 |
FETA40i-C Hardware Features | ||
---|---|---|
Peripheral | QT Y | Spec. |
LCD | ≤2 |
RGB888, up to 1920x 1080@ 60FPS |
HDMI | 1 |
HDMI1.4, 1080P@ 60FPS HDCP1.2 encryption |
LVDS | 1 |
two 8-bit data lanes, two clock lanes, up to 1920x 1080@ 60FPS |
MIPI_DSI TBD | 1 |
MIPI DSI V1.01& MIPI D-PHY V1.00, 4 data lanes, up to 1080P@ 60FPS |
TVOUT | 4 |
4 CVBS output channels, supports NTSC and PAL |
CAMERA | ≤2 |
CSI0: one 8/ 16-bit DVP, up to 5.0MP, 1080P@ 30FPS CSI1: one 8/ 16/ 24-bit DVP, up to 5.0MP, 720P@ 30FPS |
TVIN | 4 |
4 CVBS input channels, supports NTSC and PAL |
SD/MMC/SDIO |
≤4 |
SD/ SDIO 1-bit or 4-bit transfer modes up to 50MHz
SD/ MMC/ SDIO0: 4-bit data bus(for system image flashing)
SD/ MMC/ SDIO1: 4-bit data bus
SD/ MMC/ SDIO2: 8-bit data bus(for eMMC)
SD/ MMC/ SDIO3: 4-bit data bus |
USB HOST | 2 |
USB2.0 (up to 480Mbps) |
USB OTG | 1 |
USB2.0 (up to 480Mbps) |
IIS/PCM | ≤2 |
up to two IIS audio |
AUDIO CODEC | 1 |
1-ch differential PHONEOUT, 1-ch stereo earphone output, 1-ch MIC, 1-ch LineIN |
UART |
≤8 |
Each up to 115200
UART0: 3-wire, debug
UART1: 8-wire
UART2/ UART3: 5-wire
UART4/ UART5/ UART6/ UART7: 3-wire |
SPI | ≤4 |
Full duplex serial interface, maximum clock frequency 100MHz, it can be configured to be master or slave mode, two chip selections for multiple peripherals |
IIC | ≤5 | up to 400Kbps |
Ethernet | ≤2 |
1x 10/ 100Mbps, auto-negotiation
1x 10/ 100/ 1000Mbps , auto-negotiation |
PWM | ≤8 | can support PWM output and capture input |
JTAG | supported | |
KeyPad Port | supported | Up to 8*8; |
KEYADC | ≤2 |
6-bit, 2 channels, input voltage 0-2V, for analogy key detection, transfer rate up to 250Hz |
SMC TBD | ≤2 | can support ISO/IEC 7816-3:1997(E) and EMV2000(4.0) |
CIR | ≤2 | |
SATA TBD | 1 | up to 3.0Gbps |
▊ Software Features
OS Linux 3.10 | ||
---|---|---|
Cross-compiler | arm-linux-gnueabihf-gcc 5.3.1 | |
OS Installation | by SD card | by USB |
Linux Kernel |
Version: Linux3.10 | LCD backlight, 255-adjustable |
File system: EXT/NFS/VFAT, etc. | LCD driver(7") 1024x600 | |
eMMC driver | USB Host driver: U-disk, USB Hub, USB keyboard and mouse | |
Watchdog driver | USB Device driver | |
RTC driver | TF/SD/MMC card driver | |
IO driver | UART driver | |
Key driver | Soc sound card driver | |
SPI driver | Ethernet driver | |
I2C driver | 4G driver | |
OV5640 driver | USB to serial driver | |
PWM driver | HDMI 1080p@60Hz driver | |
CVBS driver(analogy camera input)x 4 | TVOUT driver | |
Capacitive touch driver | LVDS driver (1280x800) | |
Testing APP |
WiFi settings | SDIO WiFi STA |
USB WiFi module: STA/AP | install OS by USB | |
Telnet | IP settings | |
sshd/sftp server | Watchdog | |
vsftpd FTP | backlight adjust | |
web server--boa | key test | |
4G wireless network | touch | |
SPI test | audio record/ play test | |
UART test | hardware decode for video playing | |
TTL to RS232 | camera test | |
4 analogy cameras input | UVC camera | |
RTC test | CPU FM | |
TVOUT output | HDMI output | |
Qt5.9 | Qt5.9 OpenGL ES | |
hardware encode lib, decode lib | hardware floating compiler | |
gdb | adb shell remote log in |
▊
How to buy
Payment term: 100% payment in advance no matter sample orders or bulk purchasing orders.
1. Order Online
We have an online store on Alibaba, please contact us to start ordering
2. Western Union
Tell us which item and model you want to order, and we will send you a PI with Western Union account.
3. Bank Transfer(T/ T)
Tell us model and quantity, and we'll send you a PI with our company's bank account for payment.
▊ Shipment
Payment term: 100% in advance
1. Delivery: Goods will be sent out by express as requested
2. Lead time: generally, goods could be sent out within five working days for a sample order, for a bulk requirement order, please contact us to check stock status and estimated delivery time.
3. Shipping charge: buyers should bear related shipping cost.
▊ Recommended single board computer