OK5718-C Single Board Computer

CPU: TI AM5718

Architecture: Cotex-A15,Heterogeneous

Frequency: 1.5GHz

RAM: 1GB DDR3L+ECC

ROM: 8GB eMMC

System: Linux4.9.41+Wayland

Download Message Compare

Single Board Computer OK5718-C based on TI Sitara AM5718

OK5718-C is a development board/single board computer designed based on TI AM5718 processor, it consists of carrier board and SoM (system on module) and has below features


  1. ARM Cortex-A15, frequency up to 1.5GHz;
  2. DSP C66x with frequency of 750MHz
  3. 2x dul-core ARM Cortex-M4 with frequency of 213MHz;
  4. 2x dual-core PRU with frequency of 200MHz;
  5. High-speed transmission interfaces like USB 3.0, PCIe 3.0, HDMI 1.4, UART*10, QSPI*1, CAN*2, Gagibit Ethernet*2 are available and also powerful multi-media performance, wide range of applications;
  6. OS options: Linux 4.9.41 + QT5.6, TI-RTOS;
  7. 12-layer EINT PCB designing;
  8. the development board consists of carrier board and SoM, and the carrier board designed with 4-layer PCB and SoM with 12-layer PCB;
  9. carrier board dimensions of 130*190mm, and connector hight between SoM and carrier board is just 2mm;
  10. SoM with 320 pins that all functions of CPU are available;
  11. Industrial grade temp width: -40℃ to +85℃

AM5718 SoM

Multi-core heterogeneous development platform

Demos including command line and QT demos such as OpenCV, OpenCL, OpenGL demos, and also DSP and PRU environment build up and development demos

AM5718 SoM with DSP AM5718 DSP AM5718 PRU

Powerful Multi-media Performance

The development board is integrated with SGX544 3D and GC320 2D GPU which are applicable for senior graphic UI, meanwhile, Cortex-M4 GPU IPU2 is specially used
in IVA image and video hardware codec perfectly supports H.264, MPEG4 multiple encoding forms and video hardware decode playing, supports multiple video together with decoding playing,
multiple decoding channels up to 1080P@60FPS, supports MJPEG iamge hardware codec, and also the VPE can well support hardware image, video zooming and color spacing converting.

Dual-screen display

Support Linux 4.9.41, image system with QT5-wayland architecture, can be QT5.6 independent operation,
Also supports LCD and HDMI extended display, supports home screen sub-screen settings, exclusively provides waylandsink (hardware decoded video playback)
Window fixed-point display; Qt, OpenCV window fixed-point display solution

AM5718 SBC with Dual-screen display

Multiple Expanding Functions

Set LCD resolution and boot logo in UBOOT, flash OS image just by an SD card, WIFI, MIPI camera , CPU frequency auto adjusting and appoint a fixed frequency

AN5718 development board with Multiple Expanding Functions

Deeply optimized operating system

Forlinx chose a high-version Linux kernel and QT system to support Linux 4.9.41 plus QT5.6 and to optimize in depth.

Linux4.9.41 QT5.6

Pin Diagram

AM5718 development board Pin Diagram

Availabe Demos

Provide a complete platform development kit, introductory tutorials, save software finishing time; rich DEMO programs, rapid development of UI interface programs.
For more routine details, please pay attention to the official forum of Feiling Embedded Forum AM571x download information


TESTING DEMO
Forlinx Demo
BackLight
Keypad
RTC
Network
Ping
DemoBrowser
Calculato
WatchDog
Musicplayer
Audiorecorder
WIFI
Terminal
Can    4G
ARM ralted
DDR Bandwidth
Memory Latency
NBench
Linpack
Posix_SMP
Communication Bandwidth
Communication Latency
Whetstone
3D
Chameleon
KMS Cube
Coverflow
Navigation
ExampleUI
Multimedia
IVAHD H.264 Decode
VIP VPE IVAHD MPEG4 Encode and Decode
Audio Capture
H.265 (HEVC) Decode
DSP C66 Image Processing
AAC Decode
IVAHD MJPEG Encode
IVAHD H.264 Encode
Settings
Network Settings
System Shutdown
Task Info
Refresh Matrix
Memory
atrix Shutdown
system Info
Video Analytics Demo
OpenCV+OpenCL+OpenGL Demo
USB
USB Bonnie
CPU frequency testing
Command Line Testing

system information inquiry

key test

UART test

Watchdog test
WIFI test
Screen shot test
RTC test
Temp sensor test
CAN test
USB mouse test
USB2.0 test
USB 3.0 test
HDMI test

LCD backlight adjusting

camera test
SD card test
Ethernet test
Web service test
Audio record/ playback test
Sobel test
Facial recognition test
PCIe test
QSPI test
4G test
SATA test
SPI test
BT test
Hardware Codec Testing
Video playing
VPE
Gstreamer
Video zoom
Video amplication
Color space converting
Image codec
MJPEG decode
MJPEG encode
Video codec
H264 decode    H264 encode
MPEG4 decode  MPEG4 encode
PRU Testing
CSS tutorial
CCS installation
Install PRU to CCS
PRU firmware start and stop
Build new CCS
TI official demo compiling and testing
Import project    Compile project
Demo testing      Start PRU

Forlinx demo compiling and testing

Import project    Compile project
LED demo test     UART test
DSP and IPU Testing
Multiple cores communication test DSP test
Re-compile testing demo by CCS A15 application compiling

▊ Spec.


Overview of FET5718-C System on Module
CPU TI Sitara AM5718
Architecture Cortex-A15-1.5GHz DSP-C66X-750MHZ 2xDual Cortex-M4-213MHz
2xDual-Core PRU-200MHz PowerVR SGX544 3D GPU Vivante GC320 2D GPU
RAM 1GB DDR3L Flash/ Storage 8GB eMMC
Dimensions 50*70mm Pakcage board to board connector
PMU TPS659162RGZR Voltage Input 5V
Working Temp Width -40℃~+85℃ RH 10-90%RH non-condensing
OS Linux4.9.41+ QT5.6+Wayland

FET5718-C System on Module Features
Peripheral QTY Spec.
LCD ≤3 GB888 24-bit



HDMI

1

HDMI 1.4a, 1080P@60Hz;

36-bit RGB display;

HDCP 1.4 encryption;

Deep color mode (10-bit, 12-bit color depth are both supported by pixel clock of 148.5MHz)

CAMERA ≤4

2x 8-bit DVP, up to 5.0MP


2x 8/ 16/ 24-bit DVP


MIPI CSI-2

2

CSI-2_PHY1: 1x clock lane+ 4x data lane

CSI2_PHY1: 1x clock lane+ 2x data lane



SD/MMC/SDIO

≤4

1-bit or 4-bit transferring mode is supported by SD and SDIO card with UHS-I SDR104 mode (up to 104MB/s)

SD/ MMC/ SDIO1: 4-bit data

SD/ MMC/ SDIO2: 8-bit data (used as eMMC on SoM)

SD/ MMC/ SDIO3: 8-bit data

SD/ MMC/ SDIO4: 4-bit data

IIC ≤5

IIC1/ 2: up to 400Kbps, standard OD

IIC3/ 4/ 5: up to 3.4Mbps, analogy OD

HDQ1W ≤1

Support TI/ Benchmarq HDQ master device function

Comply with Dallas 1-Wire protocol

UART ≤10

can support 5/ 6/ 7/ 8 data bits, parity bit, 1, 1.5, 2 stop bits

UART1: full serial interface is supported

UART3: IrDA 1.4, CIR are supported

others are standard interface

SPI ≤4

up to 4x SPI, each with up to 4 master channel

QSPI ≤1

work as master mode only

6 signal pins

McASP ≤8

supports 8-ch audio at most

McASP1/2: up to 16 separate TX/ RX channel

McASP3-8: up to 4 separate TX/ RX channel

USB3.0 ≤1

super speed USB3.0 Dual-Role-Device, Host is supported

USB2.0 1

high-speed USB 2.0 Dual-Role-Device, Host is supported

SATA 1 SATA Gen2
PCIe ≤2

PCI Express 3.0 subsystem, with 2x 5-Gbps channel

1x Dual-channel interface with GEN2 standard, 2x Single-channel interface with Gen2 standard

CAN ≤2

two CAN controller at most, complys with CAN2.0 protocol

Ethernet ≤2

3-port gigabit ethernet switch subsystem provides ethernet packet communication and can be configured as an ethernet switch. It provides two network ports and available for RGMII/ RMII/ MII interface, 10M/ 100M/ 1000M adaptive

PWMSS ≤3

supports up to 3x PWMSS, each is available for:

eHRPWM: 16-bit timer, up to 2 separate PWM output

eCAP: 32-bit timer, one channel is special for input capture pin

eQEP: rotating decode unit

JTAG supported standard IEEE1149.1
KeyPad Port supported 9*9 keyboard
GPMC 1

8-bit/ 16-bit data bus width

up to 28-bit address bus

up to 8-bit chip selection bus


OK5718-C Single Board Features
Peripheral QTY Spec.
LCD 1

RGB 888, supports reolution up to 1920*1080 (60Hz)

HDMI 1

HDMI V1.4, up to 1080P 60FPS

CAMERA 3

8-bit DVP OV5640, MIPI OV5640, MIPI OV5645

Audio 1 1*MIC, 1*Phone, 2*Speaker
USB Host 2

expended by HUB, USB 2.0 (up to 480Mbps)

USB3.0 1 up to 5Gbps
USB Device 1 multiplexed with one USB Host
Ethernet 2 10/100/1000Mbps auto-negotiation, RJ45 connector
WiFi 1


RL-UM02WBS-8723BU-V1.2 IEEE 802.11b/g/n 1T1R WLAN and Bluetooth

Bluetooth 1
SD Card 1 compatible with SD, SDHC and SDXC(UHS-I)
SDIO 1

drawn out by 20-pin heards with pitch of 2mm, multiplexed with SD card

LED 2

for user's definition

GPMC 1 GPMC
QSPI 1 on-board 256Mb QSPI NOR FLASH
SPI 1
IIC 2
CAN 1 CAN 2.0B
UART 3

UART0 and UART1 are 5-wire serial interface, UART2 is a 3-wire interface, all are with 3.3V, each up to 5.0Mbps

UART Debug 1

RS232, DB9 connector

JTAG Debug 1
HDQ 1

single line interface, on-board DS18B20

SATA 1

SATA2, on-board 4pin D type power input connector

mini PCIe 1 can support 3G, 4G wireless module

▊ Accessories


Provides the modules and accessories used in Forlinx's SBC.

See here for communication modules, LCD screen, SBC expansion module and further accessories »

Technical Support

Forlinx provides software resources including kernel and driver source code, together with detailed user manual, schematic documentations to help customer start their development rapidly.

▊ How to buy


1. Order Online

We have an online store on Alibaba, please contact us to start ordering


2. Order offline

pls send your inquiry to our mailbox [email protected];

3. Payment Terms

Samples(100% T/T in advance),Bulk Order(please contact with our sales)

▊ Shipment


1. Delivery: Goods will be sent out by express as requested

2. Lead time: generally, goods could be sent out within five working days for a sample order, for a bulk requirement order, please contact us to check stock status and estimated delivery time.

3. Shipping charge: buyers should bear related shipping cost.

▊ Other Forlinx's Ti Products