NXP
i.MX8 M Mini based
System on Module FETMX8MM-C
i.MX8
M Mini SoC processor based
system on module
(
SoM
) FETMX8MM-C combining state-of-the-art media-specific features with high-performance processing while optimized for lowest power consumption. The i.MX 8M Mini family of processors features advanced implementation of a quad Arm® Cor-tex®-A53 core, which operates at speeds of up to 1.8 GHz.Ageneral purpose
Cortex
®-M4 400 MHz core processor is for low-power processing. The DRAM controller supports 32-bit/16-bit LPDDR4, DDR4, and DDR3L memory.Awide range of audio interfaces are available, including I2S,AC97, TDM, and S/PDIF. There are a number of other interfaces for connecting peripherals, such as USB, PCIe, and Ethernet.
Target applications
IP camera and video monitoring
Bilateral video meeting
Video door phone
Image analysis
Home display
Household appliances control
Wireless or network speaker
Superior Performance cool experience
Based on
ARM
Cortex -A53 quad-core processor
i.MX8 M Mini@ 1.8GHz,
with 2GB DDR4, high performance and powerful hashrate make system running more smoothly
H.265, VP9 decoder
Reduce band width occupancy rate VP9 and H.265 decoder can support 1080P@ 60Hz, which
is 50% more efficient, but bandwidth and capacity only 50% of H.264.
Android 9.0, Linux 4.14, QT 5.10
SoM FETMX8MM-C can support Android9.0 and Linux4.14(QT5.10)
64-bit systems, which can take users higher security and better human-machine interactive experience.
Multiple audio interfaces delivery
A wide range of audio interfaces including I2S, AC97, TDM and S/PDIF five SAI channels.Can support FLAC7.1,
sound channel output and ring audion input, which is applicablefor hi-fi music system and voice recognition system.
Low-power mode and
real-time tasks processing
FETMX8MM-C contains a Cortex-M4 core with frequency of 400MHz
and can communicate with Cortex-A53 by AHB, which can be used for lower-power sleeping mode and real-time tasks processing.
10+ years' longevity
i.MX8M Mini processor's life time is more than 10 years, which ensures users of stability of product supplying.
OKMX8MM-C SBC Pin Diagram
OKMX8MM-C single board computer consists of SoM FETMX8MM-C and carrier board
▊ Hardware Features
| Overview of FETMX8MM-C System on Module | |||
|---|---|---|---|
| CPU | NXP iMX8M Mini | ||
| Architecture | Quad-core Cortex-A53+ single core Cortex-M4 | Main Frequency | ≤1.8GHz |
| RAM | 2GB DDR4 | ROM | 8GB eMMC |
| OS | Linux4.14.78+Qt5.10.1, Android9.0 | Voltage Input | 5V |
| Package | ultra thin connector(3*80pin, pitch of 0.5mm) | ||
| Working Temp Width | 0℃~70℃ | Dimensions | 56mm×36mm |
| FETMX8MM-C System on Module Features | ||
|---|---|---|
| Peripherals | QTY | Spec. |
| CAMERA | 1 | 4-lane MIPI, up to 1.5Gbps |
| SD/SDIO | ≤2 | SD, SDIO, 1.8V mode and 3.3V mode |
| USB | 2 | USB 2.0( up to 480 Mbps), both can be configured to OTG |
| SAI | ≤5 | up to 5x SAI |
| UART | ≤4 | each up to 4.0 Mbps |
| eCSPI | ≤3 | full duplex strengthened synchronous serial interface, up to 52 Mbit/s, it can be configured to host/ slave mode |
| IIC | ≤4 | 320Kbps |
| Ethernet | ≤1 | 10/100/1000Mbps auto-negotiation |
| PWM | ≤4 | 16-bit |
| JTAG | supported |
|
| FlexSPI | 1 | support single pad/dual pad/quad pad mode |
| Display | 1 | 4-lane MIPI display, up to 1.5Gbps |
| PDM | ≤1 | up to 4-wire 8 channels |
| PCIe | 1 | PCIe 2.0 |
| OKMX8MM-C Single Board Computer Features | |||
|---|---|---|---|
| Peripherals | QTY | Spec. | |
| MIPI_DSI | 1 | 4 data lanes, protocol V1.01r11; resolution up to WQHD(1920x1080p60, 24bpp) | |
| MIPI_CSI | 1 | 4 lanes; OV5640MIPI | |
| Audio | 1 | 1*MIC, 1*Phone, 2*Speaker | |
| PDM | 1 | 10-pin header with pitch of 2mm | |
| SAI | 1 | 26-pin header with pitch of 2mm | |
| USB Host | 2 | expanded by hub, USB2.0( up to 480 Mbps) | |
| USB OTG | 1 | standard micro USB connector, USB 2.0 OTG (up to 480 Mbps) | |
| Ethernet | 1 | 10/100/1000Mbps auto-negotiation, RJ-45 connector | |
| Mini PCIe | 1 | can be mounted with 4G wireless module with mini PCIe interace, it also contains PCIe2.0 single channel | |
| WiFi | 1 |
Model: F23BUUM13-W2 WiFi standard: IEEE 802.11b/g/n ，2.4GHz Bluetooth: V2.1+EDR/BT v3.0/BT v4.0 |
|
| Bluetooth | 1 | ||
| TF Card | 1 | compatible with SD, SDHC and SDXC(UHS-I) | |
| SDIO | 1 | 20-pin header with pitch of 2mm, 8-bit | |
| SPI | 2 | 10-pin header with pitch of 2mm | |
| QSPI | 1 | on-board 16MB QSPI NOR FLASH | |
| PWM | 1 | display backlight adjusting | |
| IIC | 4 | standard mode: 100kbits/s, fast speed mode: 320kbits/s | |
| UART | 1 |
UART3 is a 3-wire serial interface, 3.3V up to 4.0 Mbps |
|
| UART Debug | 1 | UART2, RS232, DB9 male connector, default baud rate is 115200 | A53 Debug |
| 1 | UART4, 3.3V, by a 10-pin header with pitch of 2mm | M4 Debug | |
| RS485 | 1 | isolated RS485, up to 500kbps | |
| JTAG Debug | 1 |
|
|
▊ Related Product
Development board: OKMX8MM-C
▊ Download
Brochure:
Forlinx latest catalog
Hardware Manual:
OKMX8MM-C/ FETMX8MM-C Hardware Manual
▊ How to buy
Payment term: 100% payment in advance no matter sample orders or bulk purchasing orders.
1. Order Online
We have an online store on Alibaba, please contact us to start ordering
2. Western Union
Tell us which item and model you want to order, and we will send you a PI with Western Union account.
3. Bank Transfer(T/ T)
Tell us model and quantity, and we'll send you a PI with our company's bank account for payment.
▊ Shipment
Payment term: 100% in advance
1. Delivery: Goods will be sent out by express as requested
2. Lead time: generally, goods could be sent out within five working days for a sample order, for a bulk requirement order, please contact us to check stock status and estimated delivery time.
3. Shipping charge: buyers should bear related shipping cost.
▊ Recommended single board computer
