Web Search: Goods

Hot Sellings
Your present location:Home
  • Name: i.MX8M Mini Single Board Computer
  • Model: OKMX8MM-C
  • CPU: NXP i.MX8M Mini
  • Architecture: Cortex-A53
  • RAM: 2GB DDR4
  • Flash: 8GB eMMC
  • Main Frequency: 1.8GHz
  • OS: Android9.0, Linux4.14.78+ QT5.10.1


OKMX8MM-C is a Cortex-A53 single board computer/ development board designed based on NXP i.MX8M Mini quad-core and 64-bit processor with frequency up to 1.8GHz, it consists of carrier board and system on module. System on module connects to carrier board via three ultra-thin connectors, each connector has 80 pins with pitch of 0.5mm. It has on-board 2GB DDR4 RAM, can support a general Cortex-M4 processor with frequency up to 400MHz. It can support multiple audio interfaces, such as IIS, AC97, TDM, PDM and SPDIF. And also it can support multiple peripherals, such as MIPI-CSI, MIPI-DSI, USB, PCIe, UART, eCPSI, IIC and Gigabit.

Basic information of SoM FETMX8MM-C
 CPU  NXP i.MX8M Mini 

 Quad-core Cortex-A53

 Single-core Cortex-M4

 Frequency  ≤1.8GHz
 RAM  2GB DDR4  Flash  8GB eMMC


 Linux4.14.78+ QT5.10.1

 Voltage Input  5V
 Connection  ultra-thin connector (3x 80pin, pitch 0.5mm)
 Working Temp Width  0℃ to +70℃ / -40℃ to +75℃      Dimensions         56x 36mm        


SoM FETMX8MM-C Features
 Peripheral QTY  Spec.
 Camera 1  4-lane, up to 1.5Gbps
 SD/ SDIO ≤2  1.8V and 3.3V modes
 USB 2  USB2.0 (up to 480Mbps), can be configured to OTG
 SAI ≤5


 UART ≤4  each can support up to 4.0Mbps
 eCSPI ≤3  up to 52Mbit/s, can be configured to host/ slave mode
 IIC ≤4  320Kbps
 Ethernet ≤1  10/ 100/ 1000Mbps auoto-negotiation
 PWM ≤4  16-bit
 JTAG supported  
 FlexSPI 1  single pad/ dual pad/ quad pad mode
 Display 1  4-lane MIPI, up to 1.5Gbps
 PDM ≤1  up to 4-lane 8 channels
 PCIe 1  PCIe2.0


Carrier Board Features
 Peripheral QTY  Spec.
 MIPI-DSI 1  4 data lanes, V1.01r11, resoltuion up to WQHD(1920x 1080P@60FPS, 24bpp)
 MIPI-CSI 1  4 lanes, OV5640
 Audio 1  1x MIC, 1x Phone, 2x Speaker
 PDM 1

 a 10-pin header with pitch of 2mm

 SAI 1  by a 26-pin header with pitch of 2mm
 USB Host 2  expanded by hub, USB2.0(up to 480Mbps)
 USB OTG 1  standard micro-USB connector, USB2.0 (up to 480Mbps)
 Ethernet 1  10/ 100/ 1000Mbps auto-negotiation, RJ45 connector
 Mini PCIe 1  can support 4G wireless module, support PCIe2.0 single channel 

 Model: F23BUUM13-W2

 WIFI standard: IEEE 802.11b/ g/n, 2.4GHz

 BT: V2.1+ EDR/ BT v3.0/ BT4.0

 TF Card 1  Compatible SD, SDHC and SDXC(UHS-1)
 SDIO 1  a 20-pin header with pitch of 2mm, 8-bit
 SPI 2  a 10-pin header wth pitch of 2mm
 QSPI 1  on-board 16MB QSPI NOR Flash
 PWM 1  for display backlight
 IIC 4  standard mode 100kbits/ s, fast mode 320kbits/ s
 UART 1  UART3: 3-wire, 3.3V, up to 4.0Mbps
 UART Debug 1  UART2: RS232, DB9 header, default baud rate 115200  A53 debug
1  UART4: 3.3V, by a 10-pin header with ptich of 2mm   M4 debug
 RS485 1  isolated, up to 500kbps