Web Search: Goods

Hot Sellings
Your present location:Home >> Products >> Rockchip Series >> SYSTEM ON MODULE >> RK3399 System on Module
  • Name: RK3399 System on Module
  • Model: FET3399-C
  • CPU: Rockchip RK3399
  • Architecture: Cortex-A72+ Cortex-A53
  • Flash: 16GB eMMC
  • Main Frequency: Cortex-A72@1.8GHz, Cortex-A53@ 1.4GHz
  • OS: Android


FET3399-C is a system on module designed based on Rockchip RK3399 processor which consists of two Cotex-A72 featuring cores with frequency up to 1.8GHz and four Cortex-A53 featuring cores with frequency up to 1.4GHz. It's integrated with GPU Mali-T864, can support OpenGL ES1.1/ 2.0/ 3.0/ 3.1, OpenVG1.1, OpenCL and DX11. It has on-board 2GB LPDDR3 RAM and 16GB eMMC. A variety of display interfaces such as HDMI2.0, MIPI-DSI, eDP1.3 and DP1.2 are all available and resolution up to 4K. Dual-screen both synchronous and asynchronous playing are well supported. Besides, it carries PCIe, USB3.0 Host, Type-C, MIPI-CSI, SPDIF, IIC, SPI, UART, ADC, PWM, GPIO, IIS(8 digital micphone array input) and Ethernet on board.


SoM Basic Information

 Rockchip RK3399

 Cortex-A72 Core:

 2x Cortex-A72, frequency up to 1.8GHz

 64-bit ARMv8

 Cortex-A53 Core:

 4x Cortex-A53, frequency up to 1.4GHz

 64-bit ARMv8



 4-core Mali-T860MP4

 OpenGL ES1.1/ 2.0/ 3.0/ 3.1

 OpenCL1.2, OpenVG1.1, DirectX 11.1


 Source: ARGB/ RGB888/ RGB565/ RGB4444/ RGB5551/ YUV420/ YUV422(support YUV422SP10bit/ YUV420SP10bit)

 target form: ARGB/ RGB888/ RGB565/ RGB4444/ RGB5551/ YUV420/ YUV422(support YUV422/ 420 output)

 Resolution: source: 8192x 8192; target: 4096x 4096



 H.265/ HEVC, up to 4Kx 2K@ 60FPS

 VP9, up to 4Kx 2K@ 60FPS

 H.264/ AVC, up to 4Kx 2K@ 30FPS

 MPEG-1, ISO/ IEC11172-2, up to 1080P@ 60FPS

 MPEG-2, ISO/ IEC13818-2, up to 1080P@ 60FPS

 MPEG-4, ISO/ IEC14496-2, up to 1080P@ 60FPS

 VC-1, up to 1080P@ 60FPS

 MVC based on H.264 or H.265, up to 1080P@ 60FPS


 1080P 30AVC/ H.264

 1080P 30VP8


 2GB(4GB optional)

 LPDDR3 1600


 16GB(32GB optional)



 Working Temp  0℃ to +80℃
 Dimensions  46mm x 70mm
 Voltage Input  12V
 OS  Android7.1/ Linux*
SoM Hardware Features

 dual-screen engine up to 4096x 2160 and 2560x 1600, can output from below ports:


 CPU has 3 built-in MIPI PHY, MIPI0 can be only used as DSI, MIPI1 can be used as DSI or CSI, MIPI2 can be only used as CSI

 each DSI port has 4 data lanes, can support data transferring rate up to 6.0Gbps

 each DSI port can support output up to 1080P@ 60FPS

 MIPI0 and MIPI1 combination can support output 2560x 1600@ 60FPS

 eDP x 1

 eDP V1.3

 RGB 6/ 8/ 10-bit

 4 data lanes, each 2.7/ 1.62Gbps

 can support PSR

 DP x 1

 Display Port V1.2

 compatible with HDCP2.2(backward compatible with HDCP1.3)

 only has one built-in DP controller, can output from Type-C*

 support outputting up to 4Kx 2K@ 60Hz

 HDMI x 1

 HDMI1.4, HDMI2.0

 up to 18Gbps port trunks

 up to 180P@ 120Hz, 4Kx 2K@ 60Hz, QXGA@ 120Hz

 HDCP1.4/ 2.2


 IIS/ PCM x 3

 IIS0/ IIS2 can support 8-lane TX/ RX, IIS1 can support 2-lane TX/ RX

 IIS2 internally connected to HDMI and DisplayPort, IIS0 and IIS1 are for peripherals

 audio resolution from 16-bit to 32-bit

 sampling rate up to 192KHz


 can support two 16-bit audio data storaged in one 32-bit width location

 can support two-phase formate stereo audio output

 can support 16-bit to 31-bit audio data left or right justified in 32-bit width sampling data frame zone

 can support 16-bit, 20-bit, 24-bit audio data transferring in PCM mode

 can support none-PCM mode



 can support one 13.0MP camera or two 8.0MP cameras

 2 built-in ISP

 one ISP up to 14.0MP


 can support USB UVC camera input


 USB OTG3.0x 2 (contains USB OTG2.0x 2)

 Protocol: USB3.0, USB2.0, USB Host 1.1

 band width up to 8Gbps in USB3.0 full duplex mode


 USB2.0 Host x 2(saperated, not multi-plexed)

 USB2.0 host 

 can support high speed mode(480Mbps), full-speed mode(12Mbps) and low-speed mode(1.5Mbps)


 SD/ MMC x 2

 can be configured to SD/ MMC or SDIO

 compliants with SDIO3.0

 4-bit data bus width


 Gigabit Ethernet port x 1

 RGMII can support 10/ 100/ 1000Mbps transferring rate

 RMII can support 10/ 100Mbps transferring rate


 SPI x 5

 serial host and slave modes, software configurable

 DMA or interrupt based operation

 TX and RX are both 32x 16-bit FIFO


 UART x 5

 DMA or interrupt based operations

 TX and RX are both 64Bytes FIFO

 each port up to 4.0Mbps


 IIC x 7

 multi-host machine IIC

 standard mode: up to 100Kbit/ s 

 high speed mode: up to 400Kbit/ s


 PCIe x 1

 compliants with PCIe2.1

 4 full duplex channels

 each channel can support 2.5GT/ s serial data transfering rate to each direction

 dual-operation mode: Root Complex(RC) and End Point(EP)


 PWM x 3

 interrupt based operations

 32-bit timer/ counter

 can support capaturing mode

 can support continuous mode or one-time mode


 ADC x 5

 successive approaching ADC


 converting speed up to 1MS/ s sampling rate