Hot Sellings
Your present location:Home >> Products >> Samsung(Cortex-A8 | ARM11 | ARM9) >> SINGLE BOARD COMPUTER >> Samsung Cortex-A8 S5PV210 embedded system ARM development board/kit OK210 single board computer
  • Name: Samsung Cortex-A8 S5PV210 embedded system ARM development board/kit OK210 single board computer
  • Model: OK210
  • CPU: Samsung S5PV210
  • Architecture: Cortex-A8
  • RAM: 512M DDR3
  • Flash: 1G SLC NandFlash
  • Main Frequency: 1GHz
  • OS: Android/ Linux/ Win CE

Messges

Designed by SAMSUNG S5PV210 main processor which is with main frequency up to 1GHz., and  32/32KB L1 cache and 512KB L2 cache to make it possible for high performance computing of 2000DMIPS. CPU module FET210 could be connected to based board by 200-pin DIP connectors and is with 8-layer PCB design with high-speed internal wiring. HDMI is supported on OK210 and provided with Infrared remoter decode driver and source code and QT4.7 testing program is provided with source code, which allow the board powerful video processing. Besides, both CPU module and single board computer are approved by CE&FCC.

FET210 CPU Module

CPU

Samsung S5PV210 processor

USB HOST

1-ch USB HOST 2.0

Architecture

ARMv7 Cortex-A8

USB DEVICE

1-ch USB OTG 2.0

Main Frequency

1GHz

SD/MMC/SDIO

2-ch

RAM

512M DDR3

Ethernet

1-ch,100M/1000M self adaptive port

FLASH

1GB SLC Nandflash

UART/IrDA

2-ch 3-wire,
2-ch 5-wire

Input Voltage

5V

EINT/GPIO

23-ch EINT,39-ch GPIO

2D/3D

Support 2D/3D graphics acceleration

ADC

10-ch, 4-wire resistive touch interface is included.

Graphic controller

SGX540

Video Codec

Hardware codec

Size

60mm*70mm

EBIBUS

16bit parallel bus

Connection method

Pin connector

JTAG

1-ch

OS

WinCE6.0/Linux2.6.35.7/Android 4.0/2.3

HDMI

1-ch

LCD

RGB24bit

CVBS

1-ch

Audio

1-ch IIS interface audio interface

Camera

1-ch

I2C

2-ch

PWM

2-ch

SPI

2-ch

 

 

 

OK210 Base board

CVBS

1-ch

RTC

Support

Audio

3-ch(1-ch for phone, 1-ch for MIC,1-ch for Linein) WM8960 audio

JTAG

1-ch

I2C

2-ch

ADC

10-ch

SPI

2-ch

User key

8

Camera

1-ch(support OV3640,OV9650,OV5640,TVP5150 camera)

Boot switch

Set to boot from Nandflash or SD card

SD/MMC/SDIO

2-ch(1-ch is for SDIO WIFI,1-ch is for SD card slot)

Reset

1

USB HOST

1-ch, support USB 2.0 protocol

PWM

1 buzzer

USB DEVICE

1-ch,support USB2.0 protocol

LCD

1-ch,support resistive and capacitive LCD

Ethernet

1-ch 100M/1000M self adaptive port

EINT

23-ch

Serial

4-ch(2-ch 3-wire, 2-ch 5-wire)

GPIO

4

IR receiver

1

HDMI

1-ch

Temp sensor

DS18B20

SATA

Support to connect USB to SATA

Input voltage

5V

GPS

Support to connect external GPS module(Serial)

LED

4-ch

3G

Support to connect external AD3812,MF210

Android 2.3/4.0 OS

Android Version

Android 2.3/4.0

Flashing Method

Flash image file to Nandflash via SD card, yaffs2 file system
Support SD card and SDHC

Kernel Version

Linux3.0.8/Linux2.6.35 

Cross-compiler

Adopt the cross-compiler in Android source codes package, no need of extra installation.
Compile Uboot and kernel with arm-linux-4.4.1, the one to compile Linux source codes 

Drivers 

SDHC card driver

Audio recording driver

U-Disk driver

Capacitive touch screen driver

TF card driver

User key driver

Gravity sensor driver

GPS driver

HDMI high-definition display 
(audio and video output simultaneous)

GPRS Driver

USB bluetooth driver

LED driver

USB 3G driver

PWM driver

USB WIFI driver

IIC driver

SDIO WIFI Driver

Serial port driver

CMOS camera driver

USB camera driver

In Android2.3, bluetooth and camera OV9650, LCDs sized 4.3", 5.0",
7.0", 8.0" and 10.4" are available (4.3" LCD is not available in Android4.0).

System Compile Method

One-key compile Android no modification of script or codes

>

 Linux2.6.35/3.0.8 OS

Cross Compiler

arm-linux-gcc-4.4.1

Flashing Method

1. Flash image file to NandFlash via USB  (could be used to flash certain file, easy to debug) 
2. Flash image file to NandFlash via SD card (simple and swift, appropriate for mass production and
system-updating in bulk)
3. Support flashing under Windows 7 and WindowsXP

U-boot

Version:U-Boot-1.3.4

Support USB OTG2.0 download 

Nand boot

Support command line flashing uboot.bin, kernel,
zImage and yaffs2 file system

mmc.bin

Support flashing image file to NandFlash via SD card

Support flashing Linux and Android image to NandFlash via SD card 

Support flashing Uboot, kernel and file system to NandFlash via USB OTG2.0  

Linux Kernel

Version: Linux-2.6.35

Serial port driver

Support YAFFS2/CRAMFS/UBIFS/NFS/FAT32
file systems

SDIO WIFI driver

Watchdog driver

USB WIFI driver

RTC Driver

Audio driver(WM8096:ALSA Interface)

4x LED driver

Ethernet port (DM9000)

6x user key driver

CMOS camera driver(OV3640, OV9650)

SPI driver

USB to serial port driver

PWM control buzzer driver

Matrix keyboard driver

ADC driver

Infrared receiver driver

CPU touching screen controller driver

Temperature sensor driver

LCD driver (3.5", 4.3", 7", 8",10.4")

Support analogue camera(TVP5150)

USB Host driver; support U-disk, USB 3G, etc.

SPI driver

USB mouse and keyboard

IIC driver

USB camera, support UVC camera

Watchdog driver and testing program

SD card driver

GPS serial port driver

3G driver

GPRS serial port driver

MFC driver

File System

Version:busybox-1.13.3

>

Windows CE 6.0 

 

Boot Loader

EBOOT supports USB2.0 high-speed download

Flashing Method

1.Flash image file to NandFlash via USB (could be used to flash certain files, 
easy to debug) 
2.Flash image file to NandFlash via SD card(simple and swift, appropriate for mass production and
system-updating in bulk)
3.Support flashing under Windows 7 

WinCE Version

WinCE 6.0 R3 (BSP source codes are provided)

Drivers 

System interrupt and clock driver

CMOS camera driver

Serial port driver(support 3x serial ports)

CMM driver

SD card driver,
supports hot-plug with capacity up to 32G

MFC driver

Nand Flash driver

JPGE driver

Ethernet driver

IIC driver

Audio driver

SPI driver

RTC driver (keeps time on when power is off)

WIFI driver

USB Host driver

LED driver

USB OTG driver

ADC driver

LCD driver

Buzzer driver

Touching screen driver ( support 4-wire resistive LCD)

Capacitive and resistive touching screen driver

VGA driver

Camera OV9650 and OV5640 driver

Matrix keypad driver

CAN module driver

TV/HDMI driver 

Temperature sensor driver

Hardware Acceleration

Samples for DShowFilters

Samples for CMM(Codec Memory Menagement) driver

Samples for HW Jpeg encoder/decoder

Samples for DivX decoder

Samples for HW Mfc decoder

Provide source codes, living examples and relative API explanation

Application Program

Provide registry management, screen rotation, text edit, EXCEL edit, picture view, 
multi-media play, games, etc.