FCU1301 Embedded Computer

CPU: TI AM3354

Architecture: Cortex-A8

Frequency: 800MHz

RAM: 512MB DDR3

ROM: 1GB NandFlash

System: Linux3.2

Download Message Compare

FCU1301 Embedded Computer

FCU1301 is an embedded computer designed specially for dynamic environment monitoring system, IoT for data collecting.

It consists of SoM and carrier board, it's designed based on SoM FET335xD which has been widely used in medical, electronical, rail transit, industrial control , etc.

Optimized connector layout makes it very convenient to be integrated into 1U, meanwhile it's preserved with expanded connectors for WIFI, GPRS and 4G modules, its has below features:

  • 1. Power input from 9V to 36V, designed with main power, back-up power and Li-battery;
  • 2. Dual Ethernet designed with isolated solution;
  • 3. 8x RS485, which can be multiplexed with RS232, also designed with isolated solution;
  • 4. 12x DI, dry contact input, designed with isolated solution;
  • 5. 4x DO, relay output, contact capacity 5A 250VAC, 5V 30VDC;
  • 6. 2x CAN designed with isolated solution;
  • 7. 2x USB Host, for expanding usage;
  • 8. WIFI STA and AP double moding supported (optional);
  • 9. GPRS and 4G are both supported and optional;
  • 10. Available for external storage expanding.

FCU1301 supported RS485, RS232,CAN  FCU1301 based on SoM FET335xD ARM Cortex-A8 processor designed with shield solution

triple power supply various communication optional, Ethernet, 4G, GPRS and WiFi

Diagram
FCU1301 embedded computer pin diagram

▊ Spec.


Hardware Features
CPU Model: TI AM3354 Sitara ARM Cortex-A8@ 800MHz
RAM 512MB
FLASH 1GB NAND Flash
External Storage standard SD card slot
Mobile Communication

interface: mini PCI-E, standard on-board SIM card slot(users need buy the module by themselves),

module model: ME909S-821, it's available for China Mobile 4G/3G/2G, China Union 4G/3G/2G and China Telecom 4G

DO 4x DO, 220V/5A relay isolated output by terminal bond with pitch of 3.81mm
DI 12x DI, dry contact input, opto isolated and power isolated by terminal bond with pitch of 3.81mm
WIFI USB WiFi, can support STA mode and AP mode
UART 9x UART(8x RS232/RS485 multiplexed, 1x Debug)
USB HOST 2x USB Host, standard USB type A connector, for U-disk mounting
CAN BUS 2x CAN, CAN-0: CAN2.0 B, 125/250kbps; CAN-1: CAN2.0 B, 125/250kbps
IIC 1x IIC, for display expanding
Ethernet 2x 10/100M auto-negotiation, RJ45 connector, RJ45-01: 10/100M, for connection with upper system
Audio none, on-board GPIO buzzer
Clock on-board RTC CR2032, power failure for one year
Power input rated voltage: DC12V, input range: DC9V-36V, reverse polarity connecting protection
Indicator 1. power indicator, 2. status indicator
Reset Key system reset
BOOT Key can support Nand Flash booting and SD card booting mode
Dimensions 240mm×296mm
Mounting by screws
Work and Storage RH: 5%~95%, non-condensing, working temp: -40℃~70℃, storage temp: -40℃~85℃

Software Features
U-boot u-boot-2011-09
System Version Kernel: Linux-3.2.0, GCC: 4.5.3, QT: 4.8.5












Valid Driver

NIC
USB
CAN
Flash ECC verification
Nand Flash
UBI file system
SD card
RTC
4G wireless network module
UART
RS485
GPIO
SDID WIFI

Packing List

Option 1: 4G version
FCU1301 x 1
4G wireless network module x 1
4G full-band antenna x 2
2.4G antenna x 1
power adapter x 1
serial interface cable x 1


Option 2: GPRS version
FCU1301 x 1
GPRS module x 1
2.4G antenna x 1
GSM antenna x 1
serial interface cable x 1
power adapter x 1

▊ How to buy


Payment term: 100% payment in advance no matter sample orders or bulk purchasing orders.

1. Order Online

We have an online store on Alibaba, please contact us to start ordering

2. Western Union

Tell us which item and model you want to order, and we will send you a PI with Western Union account.

3. Bank Transfer(T/ T)

Tell us model and quantity, and we'll send you a PI with our company's bank account for payment.

4. Order offline

pls send your inquiry to our mailbox [email protected];

▊ Shipment


Payment term: 100% in advance

1. Delivery: Goods will be sent out by express as requested

2. Lead time: generally, goods could be sent out within five working days for a sample order, for a bulk requirement order, please contact us to check stock status and estimated delivery time.

3. Shipping charge: buyers should bear related shipping cost.

4. Payment Terms: Samples(100% T/T in advance),Bulk Order(please contact with our sales)

▊ Related Forlinx's TI AM335x SoM


FET335xD-C System on Module
FET335xS System on Module
FET335xS-II System on Module
FET335xD-C System on Module FET335xS System on Module FET335xS-II System on Module