FET1012A-C System on Module

CPU: LS1012A

Architecture: Cortex-A53

Frequency: 1.0GHz

RAM: 512MB DDR3L

ROM: 16MB QSPI NorFlash,8GB eMMC

System: Ubuntu-18.04.1,OpenWrt v18.06.0-rc2


FET1012A-C

FET1012A-C is a system on module(SoM) designed based on NXP Cortex-A53 featuring processor LS1012A@ 800MHz. It consists of carrier board and SoM and integrates with multiple high-speed peripherals include gual gigabit Ethernet PHYs with hardware packet acceleration engine, SATA3.0, PCIe2.0, USB3.0, TF card and other interfaces. It's specially supported with Ubuntu and OpenWRT and aimming at NAS, IoT gatway. broadband Ethernet gateway and industrial automation markets.

Hardware Features


Overview of FET1012A-C System on Module
CPU NXP LS1012A
Architecture Cortex-A53 MainFrequency ≤1GHz
RAM 512MB DDR3L ROM 8GB eMMC ;16MB QSPI NorFlash
OS Ubuntu/OpenWrt Voltage Input 4.2V
Package board to board connector
Working Temp Width -40℃~ +80℃ Dimensions 45mm*40mm

FET1012A-C System on Module Features
Peripheral QTY Spec.
Ethernet ≤2


CPU can support one RGMII up to 1Gbps


two 2.5Gbps SGMII configurable by SerDes


CPU has two native MAC, dual gigabit Ethernet controllers are available


PCIe2.0 ≤1 up to 5Gbps
SATA3.0 ≤1 up to 6Gbps
USB3.0 1 up to 5Gbps
QSPI 1 used by QSPI nor flash on SoM
SAI ≤5
UART ≤2
IIC ≤2
SDHC ≤2 one is used by eMMC
JTAG 1 NXP CodeWarrior TAP

Note1:SGMII, PCIe and SATA can be configured by SerDes, Forlinx configuration solution is SGMII(1G)+PCIex1+SATA3.0, others please refer to below chart


SerDes
1 2 3
Unused PCI Express(x1)
sg.m1(2.5G) sg.m2(2.5G) SATA
Unused SATA
sg.m1(1G) PCI Express(x1) SATA
sg.m1(1G) sg.m2(1G) PCI Express(x1)
sg.m1(2.5G) sg.m2(2.5G) PCI Express(x1)
sg.m1(2.5G) sg.m2(1G) PCI Express(x1)
TX_CLK PCI Express(x1) SATA
sg.m1(1G) TX_CLK PCI Express(x1)
TX_CLK sg.m2(1G) PCI Express(x1)


Software Features

Linux Ubuntu
Cross-compiler aarch64-linux-gnu-gcc Ubuntu/Linaro 7.3.0-16ubuntu3~18.04, glibc-2.27, binutils-2.30-0, gdb-8.1
System Flashing speficied flash tool to flash image to QSPI Flash
flash OS image by U-disk
UBoot version: Uboot-2018.03
can support device tree
TFTP, NFS are supported
U-disk, eMMC, TF card, QSPI Flash device are supported
MAC setting and saving
Linux Kernel Version: Linux-4.14.47
File system EXT4/NFS/FAT32, etc.
eMMC HS200 mode
TF card DDR50 mode
Watchdog
RTC Rx8010
IO
QSPI 4-wire mode high-speed reading and writing
PCIE

WLE900VX WIFI module

RTL8111F Gigabit Ethernet module

USB 3.0 U-disk, USB Hub, USB keyboard and mouse, etc.
TMU LS1012 internal temp sensor
UART
Ethernet(1000/100/10Mbps)
SATA
Ubuntu File System Version: ubuntu-18.04.1
Samba
Lighttpd
Docker
LXC
QEMU
OP-TEE OS
OpenSSL
IPSEC


Linux OpenWrt
Linux Kernel Version: Linux- 4.9.111
Openwrt Version: v18.06.0-rc2(kernel version: 4.9.111)

















































Source Pack and Version

ath10k-firmware-qca988x_2018-04-19-71e50312-1
base-files_190-r7141-e4d0ee5af5
block-mount_2018-04-16-e2436836-1
busybox_1.28.3-4
dnsmasq_2.80test2-3
dropbear_2017.75-5
ethtool_4.15-1
firewall_2018-05-14-b45e162e-1
fstools_2018-04-16-e2436836-1
fwtool_1
hostapd_2018-04-09-fa617ee6-5
hostapd-common_2018-04-09-fa617ee6-5
iperf_2.0.10-1
iperf3_3.5-1
iw_4.14-1
jshn_2018-04-12-6eff829d-1
jsonfilter_2018-02-04-c7e938d6-1
kernel_4.9.111-1-ced49591dc966c9bc9acb816df322464
kmod-ath10k_4.9.111+2017-11-01-9
kmod-ath_4.9.111+2017-11-01-9
kmod-cfg80211_4.9.111+2017-11-01-9
kmod-dma-buf_4.9.111-1
kmod-input-core_4.9.111-1
kmod-ipt-conntrack_4.9.111-1
kmod-ipt-core_4.9.111-1
kmod-ipt-nat_4.9.111-1
kmod-mac80211_4.9.111+2017-11-01-9
kmod-nf-conntrack_4.9.111-1
kmod-nf-conntrack6_4.9.111-1
kmod-nf-ipt_4.9.111-1
kmod-nf-nat_4.9.111-1
kmod-nf-reject_4.9.111-1
kmod-nls-base_4.9.111-1
kmod-ppfe_4.9.111-1
kmod-scsi-core_4.9.111-1
kmod-usb3_4.9.111-1
kmod-usb-core_4.9.111-1
kmod-usb-dwc3_4.9.111-1
kmod-usb-storage_4.9.111-1
kmod-video-core_4.9.111-1
kmod-video-uvc_4.9.111-1
kmod-video-videobuf2_4.9.111-1
layerscape-ppa-ls1012ardb_2018-01-18-cd295be2-1
layerscape-ppfe_2017-12-05-848002fe-1
libblobmsg-json_2018-04-12-6eff829d-1
libc_1.1.19-1
libgcc_7.3.0-1
libip4tc_1.6.2-1
libip6tc_1.6.2-1
libiwinfo_2018-02-15-223e09bf-1
libiwinfo-lua_2018-02-15-223e09bf-1
libjpeg_9a-1
libjson-c_0.12.1-1
libjson-script_2018-04-12-6eff829d-1
liblua_5.1.5-1
liblucihttp_2018-05-18-cb119ded-1
liblucihttp-lua_2018-05-18-cb119ded-1
libnl-tiny_0.1-5
libpthread_1.1.19-1
libubox_2018-04-12-6eff829d-1
libubus_2018-01-16-5bae22eb-1
libubus-lua_2018-01-16-5bae22eb-1
libuci_2018-03-24-5d2bf09e-1
libuclient_2017-11-02-4b87d831-1
libxtables_1.6.2-1
logd_2018-02-14-128bc35f-2
lua_5.1.5-1
luci-app-firewall_git-18.196.56128-9112198-1_all
luci-app-mjpg-streamer_git-18.196.56128-9112198-1_all
luci-app-samba_git-18.196.56128-9112198-1_all
luci-base_git-18.196.56128-9112198-1
luci_git-18.196.56128-9112198-1_all
luci-i18n-base-en_git-18.196.56128-9112198-1_all
luci-i18n-base-zh-cn_git-18.196.56128-9112198-1_all
luci-i18n-firewall-en_git-18.196.56128-9112198-1_all
luci-i18n-firewall-zh-cn_git-18.196.56128-9112198-1_all
luci-i18n-mjpg-streamer-zh-cn_git-18.196.56128-9112198-1_all
luci-i18n-samba-en_git-18.196.56128-9112198-1_all
luci-i18n-samba-zh-cn_git-18.196.56128-9112198-1_all
luci-lib-ip_git-18.196.56128-9112198-1
luci-lib-jsonc_git-18.196.56128-9112198-1
luci-lib-nixio_git-18.196.56128-9112198-1
luci-mod-admin-full_git-18.196.56128-9112198-1
luci-proto-ipv6_git-18.196.56128-9112198-1_all
luci-proto-ppp_git-18.196.56128-9112198-1_all
luci-theme-bootstrap_git-18.196.56128-9112198-1_all
luci-theme-freifunk-generic_git-18.196.56128-9112198-1_all
luci-theme-material_git-18.196.56128-9112198-1_all
luci-theme-openwrt_git-18.196.56128-9112198-1_all
mjpg-streamer_r182-10
mtd_21
netifd_2018-05-30-a580028d-1
openwrt-keyring_2018-05-18-103a32e9-1
opkg_2017-12-07-3b417b9f-2
procd_2018-03-28-dfb68f85-1
rcw-layerscape-ls1012ardb_2017-11-19-bf3ae3cb-1
rpcd_2018-05-13-82062195-1
rpcd-mod-rrdns_20170710
samba36-server_3.6.25-10
ubi-utils_2.0.2-1
ubox_2018-02-14-128bc35f-2
ubus_2018-01-16-5bae22eb-1
ubusd_2018-01-16-5bae22eb-1
uci_2018-03-24-5d2bf09e-1
uclibcxx_0.2.4-3
uclient-fetch_2017-11-02-4b87d831-1
uhttpd_2018-06-26-796d42bc-1
uhttpd-mod-ubus_2018-06-26-796d42bc-1
usign_2015-07-04-ef641914-1
wireless-regdb_2017-10-20-4343d359
wpa-supplicant_2018-04-09-fa617ee6-5



▊ Download


Brochure: Forlinx latest catalog

Hardware Manual: OK1012A-C/ FET1012A-C Hardware Manual






How to buy


Payment term: 100% payment in advance no matter sample orders or bulk purchasing orders.

1. Order Online

We have an online store on Alibaba, please contact us to start ordering

2. Western Union

Tell us which item and model you want to order, and we will send you a PI with Western Union account.

3. Bank Transfer(T/ T)

Tell us model and quantity, and we'll send you a PI with our company's bank account for payment.


Shipment


Payment term: 100% in advance

1. Delivery: Goods will be sent out by express as requested

2. Lead time: generally, goods could be sent out within five working days for a sample order, for a bulk requirement order, please contact us to check stock status and estimated delivery time.

3. Shipping charge: buyers should bear related shipping cost.