FET1046A-C System on Module
FET1046A-C is a system on module ( SoM) designed based on NXP Cortex -A72 featuring quad-core processor LS1046A with frequency up to 1.8GHz, the processor can support 8 native Gagibit Ethernet, up to 2 XFI(10GbE). PCIw3.0 (x4), SATA3.0, USB3.0, UART, IIC prepherial interfaces are available, in software view, Ubuntu and OpenWRT are both well supported. Target applications are industrial router, edge computing gateway, IP-PBX, energy management, automation, etc.
Robust processing performance
Quad-core
ARM
Cortex -A72 processor with frequency up to 1.8GHz,
2GB DDR4 RAM, data throughput up to 2.1GT/s, and CoreMark up to 45000
8 Native Ethernet
up to two XFI(10GbE)
High-speed Network
Data Path Acceleration Architecture(DPAA) incorporating acceleration for Packet parsing, classification,
and distribution(FMan), queue management for scheduling, packet sequencing,
and congestion management(QMan), and hardware buffer management for buffer allocation
and de-allocation(BMan). Software supported with DPDK and OVS-DPDK for high
performance in network related data packet processing
Flexible scalability
PCIe2.0(up to 5Gbps) scalable for Ethernet, dual-band WiFi and other high-speed peripherals
COM Express Package designing
COM Express package designing between SoM
and carrier board can provide data transfering rate up to 10GHz,
providing a wealth of connectivity and interface options. COM Express
Mini Type 10 with high compatibility makes it flexible for users to custom different SoM for carrier board.
OS Supporting
Ubuntu18.04 and OpenWRT are available for applications
and plugins from third parties, which is convenient for users to do development
OK1046A-C SBC Pin Diagram
OK1046A-C single board computer consists of SoM FET1046A-C and carrier board
▊ Spec.
| Overview of FET1046A-C System on Module | |||
|---|---|---|---|
|
CPU |
NXP LS1046A |
||
|
Architecture |
Quad-core, Cortex-A72 |
Main Frequency |
≤1.8GHz |
|
RAM |
2GB DDR4 |
ROM |
8GB eMMC; 16MB QSPI NorFlash |
|
OS |
Ubuntu-18.04.1/OpenWrt v18.06.0-rc2 |
Voltage In |
12V |
|
Package |
COM Express |
||
|
Working Temp. |
-40℃~ +75℃ |
Dimensions |
84mm×55mm |
| FET1046A-C System on Module Features | ||
|---|---|---|
|
Peripheral |
QTY |
Spec. |
|
Ethernet |
≤8 |
CPU can support 8 native MAC, available for below combinations: |
|
PCIe3.0 |
≤3 |
Set by SerDes, can support x1, x2 and x4 modes, each channel up to 8GT/s |
|
SATA3.0 |
≤1 |
Set by SerDes, transfer rate up to 6Gbps |
|
SerDes2 |
4 |
8 SerDes channels can be used for high speed peripherals: 3-ch PCI Express 3.0 controller 1-ch SATA 3.0 controller can support up to 5-ch SGMII and each 1000 Mbit/s can support up to 3-ch SGMII and each 2500 Mbit/s can support up to 2-ch XFI (10 GbE) can support up to 1-ch QSGMII |
|
USB3.0 |
≤3 |
Up to 5Gbps |
|
UART |
≤6 |
2-ch DUART or 6-ch UART |
|
IIC |
≤3 |
|
|
eSDHC |
≤1 |
Can support SD3.0 EMMC4.5, multiplexed with eMMC, it can be used for system booting from card or OS image flashing, but can not be used for external memory expanding |
Note2：SerDes can be used for settings of Ethernet, PCIe and SATA, details please refer to ' QorIQ LS1043A Reference Manual'
▊ Software Features
| Linux ubuntu | ||
|---|---|---|
|
Cross-compiler |
aarch64-linux-gnu-gcc |
Ubuntu/Linaro 7.3.0-16ubuntu3~18.04, glibc-2.27, binutils-2.30-0, gdb-8.1 |
|
Booting Mode |
boot from SD card |
|
|
OS image flashing by U-disk |
|
|
|
UBoot |
version: Uboot-2018.03 |
|
|
can support device tree |
|
|
|
can support files downloading by TFTP and NFS |
|
|
|
can support U-disk, eMMC, TF card, QSPI NorFlash peripherals |
|
|
|
can support MAC setting and saving in Linux kernel |
|
|
|
Kernel Driver |
Version: Linux-4.14.47 |
|
|
File system |
EXT4, NFS, FAT32, etc. |
|
|
eMMC |
HS200 high-speed mode |
|
|
watchdog |
|
|
|
RTC |
Rx8010 |
|
|
IO |
|
|
|
QSPI |
can support 4-wire mode high speed reading and writing |
|
|
PCIe |
can support 5G WIFI module: WLE900VX (mini PCIe) |
|
|
USB 3.0 |
U-disk, USB Hub, USB keyboard, USB mouse, etc. |
|
|
TMU |
LS1043 internal temp sensor |
|
|
UART |
|
|
|
SATA |
1-ch mSATAT |
|
|
Ethernet(10000/1000/100/10Mbps) |
1-ch XFI, 1-ch SFP+, and 5-ch Gigabit Ethernet ports |
|
|
UART |
1-ch RS232 debug port, 3-ch RS232 general purpose ports |
|
|
Ubuntu File System |
version: ubuntu-18.04.1 |
|
|
Samba |
|
|
|
Lighttpd |
|
|
|
Docker |
|
|
|
LXC |
|
|
|
QEMU |
|
|
|
OP-TEE OS |
|
|
|
OpenSSL |
|
|
|
IPSEC |
|
|
|
DPDK |
OVS-DPDK |
|
| Linux LEDE v17.01.6 Release | |
|---|---|
|
Linux Kernel |
Version: Linux- 4.9.63 |
|
Openwrt |
Version: v17.01.6 |
|
Source Pack and Version |
ath10k-firmware-qca988x_2017-03-29-956e2609-1_aarch64_generic |
▊ Download
Brochure:
Forlinx latest catalog
Hardware Manual:
OK1046A-C/ FET1046A-C hardware manual
▊ How to buy
Payment term: 100% payment in advance no matter sample orders or bulk purchasing orders.
1. Order Online
We have an online store on Alibaba, please contact us to start ordering
2. Western Union
Tell us which item and model you want to order, and we will send you a PI with Western Union account.
3. Bank Transfer(T/ T)
Tell us model and quantity, and we'll send you a PI with our company's bank account for payment.
▊ Shipment
Payment term: 100% in advance
1. Delivery: Goods will be sent out by express as requested
2. Lead time: generally, goods could be sent out within five working days for a sample order, for a bulk requirement order, please contact us to check stock status and estimated delivery time.
3. Shipping charge: buyers should bear related shipping cost.
▊ Recommended single board computer
