LS1028A Single board computer OK1028A-C
OK1028A-C is a single board computer/ development board designed based on Cortex -A72 featuring dual-core processor LS1028 A up to 1. 5G Hz. It carries on-board 2GB DDR4 RAM and 8GB eMMC, can support 5 Gigabit Ethernet ports with TSN, 2 CAN-FD, USB3.0, UART, SPI, IIC, LVDS, TF card slot, SATA3.0, Headphone peripheral sources, and preserved with M.2 Key B for 5G module, mini PCIe for 4G module, and M.2 Key E for WiFi module.
Various high speed peripheral interfaces
FET1028A-C can support up to 6 Gigabit Ethernet ports, PCIe3.0, SATA3.0, USB3.0, CAN-FD are also available, which are preferable for industrial IoT, 5G gateway related applications.
Advanced computing performance
4K display output
Has one display interface, available for DP1.3 and eDP1.4,
output resolution up to 4Kp60
Ubuntu18.04 is well supported with apt-get installation, which makes development easy to go
Carrier board pin diagram
Industrial IoT, TSN, SD-WAN, 5G CPE, edge computing, gateway, IP-PBX, smart factory, information securiety, intelligent transport, power management, etc.
|Overview of SoM FET1028A-C|
|RAM||2GB DDR4||ROM||8GB eMMC|
|OS||Ubuntu||Power input||DC 12V|
|Working temperature||-40℃~ +85℃||Dimensions||42mm×65mm|
|FET1028A-C System on Module Hardware Features|
|Display Port||≤1||DP1.3 and eDP 1.4, up to 4Kp60|
CPU has 6 native MAC
up to 2.5Gbps, can support TSN and one of them has a 4-port TSN switch;
5 Ethernet ports can be configured by SerDes
up to 8GT/s, configured by SerDes
|SATA 3.0||≤1||up to 6Gbps , configured by SerDes|
|USB 3.0||≤2||up to 5Gbps|
|UART||≤4||can support 1x DUART or 4x UART|
1x 4Lane SerDes, available for SGMII, QSGMII, PCIe, SATA combinations as below:
A. SGMII+QSGMII+PCIe2.0 x1+SATA3.0
B. PCIe3.0 x1+QSGMII+PCIe3.0 x2
C. SGMII+QSGMII+PCIe3.0 x2
D. PCIe3.0 x2+PCIe3.0 x2
E. SGMII+QSGMII+PCIe3.0 x1+PCIe3.0 x1
F. PCIe3.0 x4more details refer to SerDes list 'LS1028ARM.pdf'
|OK1028A-C Single Board Computer Features|
|Ethernet||5||RJ-45, 10/100/1000Mbps auto-negotiation, all can support TSN|
|USB Host||1||USB 3.0, Super-speed (5 Gbit/s)|
|LVDS||1||can support single 8-bit or dual 8-bit LVDS output|
|WiFi||1||M.2 key E connector, PCIe Gen2, can support 2.4G& 5G WiFi module|
|SATA||1||SATA3.0, 1.5 Gb/s - 6.0 Gb/s|
|4G||1||mini PCIe connector, alternative with 5G module|
|5G||1||M.2 key B connector, alternative with 4G module|
|UART||1||3-wire serial, 3.3V voltage|
|CAN||2||can support CAN2.0B, CAN FD; 5 Mbit/s|
|SPI||1||full dulplex, can support host/ slave mode|
|IIC||2||100 /400 kbps|
|TF Card||1||compatible with SD3.0（UHS-I）|
|LED||2||programmable, controlled by GPIO|
|PWM||1||LVDS backlight control|
|UART Debug||1||RS232, DB9 header|
Payment term: 100% payment in advance no matter sample orders or bulk purchasing orders.
1. Order Online
We have an online store on Alibaba, please contact us to start ordering
2. Western Union
Tell us which item and model you want to order, and we will send you a PI with Western Union account.
3. Bank Transfer(T/ T)
Tell us model and quantity, and we'll send you a PI with our company's bank account for payment.
Payment term: 100% in advance
1. Delivery: Goods will be sent out by express as requested
2. Lead time: generally, goods could be sent out within five working days for a sample order, for a bulk requirement order, please contact us to check stock status and estimated delivery time.
3. Shipping charge: buyers should bear related shipping cost.
▊ Recommended system on module FET1028A-C