FCU1101 Embedded Computer

CPU: i.MX6UltraLite

Architecture: Cortex-A7

Frequency: 528MHz

RAM: 256MB DDR3

ROM: 256MB NandFlash

System: Linux3.14,Linux4.1.15

Brief Message Compare

FCU1101 Embedded Computer with NXP i.MX6UL Processor

FCU1101 is an embedded computer designed based on NXP i.MX6UL processor with frequency of 528MHz, it has 256MB RAM and 256MB NAND Flash which could be upgraded to 1GB. Linux 3.14 is well supported with hardware float pointing. Prepherial interfaces such as RS485, Ethernet, WIFI, 4G, ZigBee/ LoRa are all available. It has stable performance under rough environment(-35℃ to +70℃)


FCU1101 embedded computer FCU1101 embedded computer

Powerful communication performance

i.MX6UL embedded computer Powerful communication performance i.MX6UL embedded computer Powerful communication performance i.MX6UL embedded computer Powerful communication performance

Flexible networking 2.4Ghz operating frequency

Flexible networking 2.4Ghz operating frequency Zigbee

Supports fixed transmission, transparent transmission,
four online working modes switching freely, powerful penetrability, long distance communication and low power performance

RS485 Communication

4x RS485, with 1.5KV isolation and ESD4 protection;
comply with Modbus protocol(RTU mode)

i.MX6UL embedded computer RS485 Communication

WIFI, 4G and Ethernet

4G module all Netcom
10/100M auto-negotiation Ethernet with RJ45 connctor
IEEE802.11b/g/n, STA and AP modes optional, available for WPA2 encryption mode

i.MX6UL embedded computer WIFI, 4G and Ethernet

Multiple protocols

Web Server, IPtables, Sqlite, HTTP, FTP, Telnet, SSH, TFTP, DHCP, TCP/ IP
and UDP are all supported, convenient for remote debugging and maintenance

i.MX6UL embedded computer Multiple protocols

Standard MQTT

MOQQ is supported to visit Ali Cloud directly for news subscription or announcement

Standard MQTT

System with stable performance, easy for development

i.MX6UL embedded computer System with stable performance

Diagram

FCU1101 embedded computer FCU1101 embedded computer

Mechainical dimensions

FCU1101 embedded computer

▊ Hardware Features


FCU1101 Hardware Features
Item Spec.
CPU NXP i.MX6UltraLite ARM Cortex-A7 528MHz
RAM DDR3 256MB
ROM NAND Flash 256MB(1GB upgradable)
Ethernet 1-ch, 10/100Mbps
RS485 4-ch, 1.5KV isolation, ESD4
Reset 1-ch, for system reset
Boot Key 1-ch, works together with reset to update firmware
4G

Model: Quetel EC20(GPS and audio are not supported)

Network: 4G/3G/2G

WiFi can support STA and AP
ZigBee 1-ch, 2.4GHz, Model: WLT2408NZ



Optional

LoRa

1-ch, 433MHz, can support 20dBm, 27dBm, 30dBm.

Model: E32-TTL-100(433T20DC) 20dBm (default)  E32(433T27D)        27dBm  E32-TTL-1W(433T30D)    30dBm

TF Card expanding storage(32GB tested)
RTC can support NTP


Power IN

main power: DC 12V,

voltage input width: DC9V~36V, with anti-reverse protection and over-current protection

Working Environment RH: 5%~95%, non-condensing; working temp: -35℃~70℃(note: WIFI temp width: 0℃~70℃), storage temp: -40℃~85℃

Software Features
Source Spec.
OS Linux-3.14.38/4.1.15
File System Yaffs2
GCC 4.6.2
RS485 Demo provided, can support Modbus(RTU)
Network TCP/IP, UDP, DHCP, TFTP, FTP, Telnet, SSH, Web, HTTP, IPtables, MQTT, SQLITE
Ethernet 10M/100M auto-negotiation, can support static/ dynamic IP address, and MAC settings
WiFi can support STA and AP
4G Wireless Network EC20, Network: 4G/3G/2G
RTC NTP is supported
ZigBee Module WLT2408NZ
LoRa Module E32-TTL-100
Watchdog supported
Packing List
Item Model QTY Unit
FCU1101 Embedded Computer FCU1101+M9AA10 1 piece
2.4G antenna SMA interface, internal thread, 3dB 1 piece
4G antenna 4G antenna (black color) 1 piece
Power adapter 5.5*2.1mm AC220V DC12V 2A 1 piece
Forlinx packing box 225*190*84 1 box
Optional Modules
Name Spec. QTY Unit
LoRa Module E32-TTL-100 1 piece
Antenna 433M, 2.5dBi 1 piece
Name Spec. QTY Unit
ZigBee Module WLT2408NZ-U 1 piece
ZigBee Antenna no IPX interface 1 piece

Note: LoRa module and ZigBee module are optional, but can not supported together

▊ Accessories


Please click here to get more information about the supported modules and accessories.

▊ Technical Support


1. Files to be provided after buying

Hardware related: datasheet, user guide, carrier board schematic, carrier board PCB, SoM pinmux;

Firmware related: OS image, testing demo, source code, manual;

Compiling environment

2. Fast response after-sale technical support service

Contact Us

Welcome to get in touch with us, our experts will reply to your email within 24 hours.

Reset

▊ How To Buy


1. Order Online

We have an online store on Alibaba, please contact us for details.

2. Order Offline

Please send your inquiry to [email protected];

3. Payment Terms

100% T/T in advance.

▊ Shipment


1. Delivery: Goods will be shipped by express upon the receipt of the payment;

2. Lead time: Goods will be shipped out within five working days for sample orders and 6 weeks for bulk orders;

3. Shipping charge: Buyers should bear the shipping cost.

▊ Other Forlinx NXP i.MX6UL Series Products


Commercial-grade FETMX6UL-C1 System on Module(SoM)
iMX6UL Single Board Computer
FETMX6UL-C1 System on Module OKMX6UL Single Board Computer