Forlinx is a Gold Partner of NXP, focusing on designing and manufacturing of cost-effective ARM board solutions.
Choose Forlinx, you will get more than just an embedded board and NXP SoC based ARM board solutions are especially recommended.
System on Module FET1061-S based on i.MX RT1061
FET1061-S is a system on module designed based on NXP Cortex -M7 MCU i.MX RT1061@ 528MHz(commercial grade one 600MHz), it has on-chip SRAM up to 1MB, 512KB can be flexibly configured as TCM or general purpoes on-chip RAM, and it can support QSPI-NOR Flash with capability of 4MB.
It has a compact volume of 30x 30x 3mm with edge soldering package, 100 pins are available with pitch of 1.0mm. It integrates HS_GPIO, CAN-FD and NAND/ NOR/ PSRAM controllers. The SoM temp width ranges from -40℃ to +85℃. Meanwhile, various peripheral interface such as UART, 2x Ethernet, USB, CAN, CAN-FD, HS_GPIO and PWM, ADC are available on carrier board. Bare metal and Free RTOS are both supported.
Large capacity On-Chip SRAM
i.MX RT1061 doubles the capacity of the on-chip On Chip SRAM to 1MB while maintaining pin compatibility with i.MX RT1052
Fully implemented CAN protocol specification
It has a flexible data rate (CAN-FD) protocol specification and a CAN 2.0B protocol specification.
High-speed GPIO emulation of various serial/parallel communication protocols
Supports 32 high-speed GPIOs, and can simulate communication protocols such as UART, I2C, SPI, and PWM.
Communication Interface
The core board natively supports 2x10/100M adaptive Ethernet, 2 CAN2.0B, 7 UART .
Native data encryption
The internal integration of real-time encryption and decryption functions, the externally expanded ROM information is encrypted and then burned,
and the acceleration module inside the CPU chip can realize real-time decryption to ensure the efficiency of program execution.
Industrial grade quality
The board design fully considers the signal integrity to ensure the best electrical performance;
optimizes the power supply architecture and adjusts the power supply sequence to improve the robustness of the system.
Rich DEMO program
Provide a complete platform development kit, introductory tutorials, save software finishing time;
rich DEMO routines, rapid application development.
Interface Display
i.MX RT1061 development board interface display
▊ Hardware Features
Overview of FET1061-S System on Module | |
---|---|
CPU | i.MXRT1061 |
Arichitecture | Cortex-M7 |
Frequency | 528MHz |
RAM | On Chip SRAM 1MB |
Flash | QSPI Nor Flash 4MB |
OS | bare metal, FreeRTOS |
Power In | 5V |
Dimensions | 30×30mm |
PCB | thickness: 1mm, 4-layer ENIG |
Package | edge soldering, 4*25pin, pitch of 1mm |
Working Temperature | -40℃~+85℃ |
FET1061-S System on Module Features | ||
---|---|---|
Interface | QTY | Spec. |
SD/MMC/SDIO | ≤2 |
Supports SD/ SDIO card 1-bit or 4-bit transfer modes |
USB | 2 |
USB2.0(up to 480Mbps), integrated with HS USB PHY |
SAI | ≤2 |
Up to 3-ch I2S audio |
UART | ≤7 |
Each up to 5.0Mbps |
eCSPI | ≤3 |
Full duplex enhanced serial interface, data rate up to 52Mbit/s. It's available for both host and slave modes, each SPI controller has four chip selection to support multiple prepherial |
IIC | ≤4 | |
Ethernet | ≤2 |
10/ 100Mbps auto-negotiation |
PWM | ≤26 |
4x 16-bit PWM controller, each channel support up to 8 pins |
SWD | supported | |
KeyPad Port | supported | 8*8; |
QSPI | ≤2 | QSPI NOR flash |
CAN | ≤2 | CAN 2.0B |
CAN FD | 1 | CAN FD |
ADC | ≤10 |
two 12-bit ADC, up to 10 input channel |
▊ Software Features
DEMO | |
---|---|
Demos under \boards\evkbimxrt1060\driver_examples | Demos under \boards\evkbimxrt1060\demo_apps |
ADC | helloword |
adc_etc | hello_world_virtual_com |
bee | led_blinky |
cache | power_mode_switch |
cmp | sai |
dcp | shell |
edma | uart_gprs |
enc | xbar_aoi |
enet | Demos under \boards\evkmimxrt1060\lwip_examples |
canfd | lwip_httpsrv |
flexcan | lwip_iperf |
flexio | lwip_ping:ping |
flexio3 | lwip_ping_enet1_enet2: Dual network ports ping |
flexram | lwip_tcpecho |
flexspi: read and write Flash | lwip_tcpecho_enet1_enet2 |
gpio: LED | lwip_udpecho |
gpt | lwip_udpecho_enet1_enet2 |
kpp | Demos under \boards\evkmimxrt1060\rtos_examples |
lpi2c: (RTC, EEPROM) | freertos_event |
lpspi | freertos_generic |
lpuart (uart2) | freertos_hello |
pit | freertos_lpi2c_eeprom |
flexpwm | freertos_lpuart |
qtmr | freertos_mutex |
rtwdog | freertos_queue |
sai | freertos_sem |
sdcard | freertos_sem_static |
snvs | freertos_swtimer |
src | freertos_tickless |
tempmon | Demos under \boards\evkmimxrt1060\usb_examples |
trng | usb_device_hid_mouse |
wdog | usb_host_hid_mouse |
ewm | usb_host_hid_mouse_keyboard |
xbara | |
Demos under boards\evkmimxrt1060\fatfs_examples | fatfs_sdcard |
▊ Accessories
Provides the modules and accessories used in Forlinx's SBC.
See here for communication modules, LCD screen, SBC expansion module and further accessories »
Technical Support
Forlinx provides software resources including kernel and driver source code, together with detailed user manual(FETMX6Q-C reference manual), schematic documentations to help customer start their development rapidly.
For more details on solution design with FET1061-S SOM
▊ How to buy
1. Order Online
We have an online store on Alibaba, please contact us to start ordering
2. Order offline
pls send your inquiry to our mailbox [email protected];
3. Payment Terms
Samples(100% T/T in advance),Bulk Order(please contact with our sales)
▊ Shipment
1. Delivery: Goods will be sent out by express as requested
2. Lead time: generally, goods could be sent out within five working days for a sample order, for a bulk requirement order, please contact us to check stock status and estimated delivery time.
3. Shipping charge: buyers should bear related shipping cost.
▊ Other Forlinx iMXRT Series Products
Architecture: Cortex-M7
Frequency: 528MHz
RAM: 512KB SRAM ,16MB SDRAM,32MB SDRAM(optional)
ROM: 4MB QSPI NorFlash(16MB optional)
System: UcLinux,FreeRTOS,RT-Therad,Bare Metal
Architecture: Cortex-M7
Frequency: 528MHz
RAM: 512KB SRAM ,16MB SDRAM,32MB SDRAM(optional)
ROM: 4MB QSPI NorFlash(16MB optional)
System: UcLinux,FreeRTOS,RT-Therad,Bare Metal
Architecture: Cortex-M7
Frequency: 528MHz
RAM: 1MB on-chip SRAM
ROM: 4MB QSPI NorFlash(16MB optional)
System: FreeRTOS,RT-Therad,Bare Metal
Architecture: 2*A55+M33
Frequency: 1.5GHz
RAM: 1GB LPDDR4
ROM: 8GB eMMC
System: Linux 5.15.52+Qt 6.3.2
