FETMX6ULL-C System On Module
The high-performance Linux FETMX6ULL-C SoM is based on the NXP i.MX6ULL processor with a low-power ARM Cortex-A7 architecture running at speeds up to 800MHz.
FETMX6Q-C System on Module
FETMX6Q-C system on module based on NXP/Freescale Cortex-A9 i.MX6 quad core processor with main frequency up to 1.2GHz, this SoM is with 320 pins and it is designed with 12-layer ENIG PCB, supports a variety of display screen interfaces and image collectors.
FETMX6ULL-S System on Module
The FETMX6ULL-S is a highly flexible ARM Cortex-A7 NXP iMX6ULL System on Module / Computer on Module with up to 800MHz, supported Linux4.1.15+QT5.6 system.
FETMX6UL-C1 System on Module
Forlinx commercial-grade iMX6UL system on module(SoM)/computer on module(CoM) uses NXP's ARM Cortex-A7 i.MX 6UltraLite processor, onboard 512MB DDR3 memory and 4GB high-speed eMMC memory.
FETMX6UL-C2 System on Module
FETMX6UL-C2 is an industrial-grade SoM based on NXP i.MX6 Ultra Lite microcontroller belongs to Cortex -A7 and is with main frequency of 528MHz, 256MB LvDDR3 and 256MB NAND Flash, the CPU module is with a couple of board-to-board connectors each with 80pins.
FETMX6DL-S System on Module
Forlinx embedded iMX6 series system on module adopts NXP Cortex-A9 dual-core i.MX6DL processor, main frequency 1.2 GHz, stamp hole connection method, strong stability.
FETMX6Q-S System on Module
FET-SoM-iMX6Q-S is an embedded system module based on the NXP Arm Cortex-A9 i.MX6 Quad-core processor, featuring high performance and stability. Equipped with an LCD interface, it can be started and debugged without a baseboard, reducing development difficulties.