-
How to Update Android Firmware OTA for OKT507-C
How to compile and package the OTA update package for the OKT507-C device. Including configuring the compilation environment, compiling firmware, packaging full and incremental OTA update packages, and the specific steps for OTA upgrade via TF card/USB or ADB.
Details >
-
How to Output PWM Squareware by OK1028A-C development board
Configure OK1028A‑C for PWM output via FTM7: update RCW pinmux, add DTS node & control via sysfs for precise 1 kHz square waves.
Details >
-
GPIO Multiplexed and Ethernet Subnet based on LS1028A Development Board
Explore the features of LS1028A, including GPIO multiplexing and Ethernet capabilities like TSN, on this development board.
Details >
-
Approach Triple Displays(Dual MIPI DSI CRT and One HDMI) by RK3399 Board
LCD Controller of Rockchip is called VOP(Video Output Processor), it integrates with 1~2 VOP. Only the chip which has two VOP can support dual-screen playing asynchronously.
Details >
-
RK3399 SoM (System on Module) Applied in Facial Recognition Solution
A facial recognition system has been used by communities, business buildings, and other public places for contactless temperature measurement, which can highly reduce people-to-people contact risk, improve efficiency, and cut down manual costs.
Details >
-
How Custom Display in Uboot for i.MX8MM Core Board
If users want to add a new display, just take the display datasheet and extra add a set of display parameters, set panel, appoint to use the added parameters(note: this is only for MIPI display that doesn't need initialization). As Forlinx uboot is not open, users can not do any change to source code, thus users can not add any display parameters.
Details >
-
How to Configure Dual Ethernet on OKA40i‑C Development Board
Configure dual 100 Mbps Ethernet on the OKA40i‑C dev board: learn hardware wiring, pin‑mux FEX settings, IP101 PHY setup, and flashing steps in one concise guide.
Details >
-
i.MX8MM Applied in IPAudio Solution
IP audio can encode analogue audio signal and transfer it by network and decode it to audio signal. Distribute any audio source or input to any output or speaker over the network, without having to home run costly speaker wire or lossy analog audio back to a centralized rack.
Details >
-
Dynamic Environment Monitoring System Solution Based on FCU1301
FCU1301 is an embedded computer designed by Forlinx for dynamic environment monitoring system solution.
Details >
-
LoRa Base Station Solution based on SoM FETMX6UL-C2
The IoT industry had a fast development in the past two years. This to large extent profits from the development and breakthrough of LPWAN.According to data statistics from GSMA, by 2020, the whole IoT industry will have greater development power, especially the application of LPWAN connectivity will account for around 60% of the whole IoT connectivity.
Details >
Current position：
Home / Search results
About 561 records of“” were found