Forlinx is a Gold Partner of NXP, focusing on designing and manufacturing of cost-effective ARM board solutions.
Choose Forlinx, you will get more than just an embedded board and NXP SoC based ARM board solutions are especially recommended.
System on Module FET1052-C based on i.MX RT1052
FET1052-C is an system on module(SoM) designed based on NXP Cortex-M7 i.MX RT1050 series processor, the one we use is i.MXRT1052. It operates at speeds up to 528MHz to provide high CPU performance and best real-time response. The i.MX RT1052 processor has 512 KB on-chip RAM,which can be flexibly configured as TCM or general-purpose on-chip RAM. 16MB/ 32MB SDRAM, 4MB/ 16MB QSPI-NorFlash are optional on SoM FET1052-C.
The SoM FET1052-C is an industrial grade item with working temperature ranges from -40℃ to +85℃ and it has a compact appearance that dimensions only 31mm * 43mm, the SoM is designed with a couple of 80-pin connectors with pitch of 0.8mm, all 160pins of the processor are drawn out with GPIO up to 124 pins. Other peripheral pins such as UART, Ethernet, USB, CAN, PWM, ADC, LCD and CAMERA are all available. What's more, OS uClinux is supported very well.
Dual-form cross-border design
FET1052-C core board supports bare-metal running, FreeRTOS, RT-Thread and uCLinux operating systems,
and has the dual forms of MCU and MPU. It can be selected on demand and is more flexible. Support bare metal program, easy to use,
High real-time performance and lower power consumption; support uCLinux operating system, multi-task operation, easy code maintenance, and strong application portability.
High performance, high real-time, low power consumption
The main frequency of the core board is 528MHz, Coremark runs 3020, 1284 DMIS; 512KB tightly coupled memory,
interrupt latency is as low as 20ns; When the CPU is running at full load, the power consumption of the core board is only 0.5W.
Industrial grade quality
The board design fully considers the signal integrity to ensure the best electrical performance;
optimizes the power supply architecture and adjusts the power supply sequence to improve the robustness of the system.
Powerful scalability
The core board leads out all the processor function pins, and 124 GPIOs can be configured.
Natively supports LCD, Camera, USB, UART, CAN, Ethernet, PWM and other functional interfaces.
Powerful multimedia capabilities
24-bit LCD interface, maximum support 1366*768, support 2D graphics acceleration, support emWIN graphics library in MCU mode.
Support parallel camera interface and 3-lane IIS audio interface.
Native data encryption
The internal integration of real-time encryption and decryption functions, the externally expanded ROM information is encrypted and then burned,
and the acceleration module inside the CPU chip can realize real-time decryption to ensure the efficiency of program execution.
Rich and practical communication interface
Support 8 UART, up to 5Mbps; 10/100M adaptive Ethernet, support lwip protocol package;
Support 2 CAN, 2.0B protocol; Support 20 ADC, 12-bit precision; Support 32 PWM, complementary output, orthogonal decoding , Motor fault detection.
Easy to develop
MCU development tools support Keil, IAR, ARM-GCC, and more, as well as Amazon, FreeRTOS, SDK, ARMmbed, and the global ARM ecosystem of software libraries,
online tools, and corresponding support for rapid prototyping and development. MPU development tools still use Ubuntu plus GCC, which engineers are familiar with.
Multiple certifications
Committed to improving product stability, it has been certified by CE FCC RoHS
Small size
The core board is small in size, only 31mm x 43mm, and is designed with anti-reverse board-to-board connectors for pre-development testing and late batch assembly.
Development Board interface display
▊ All-in-one HMI Tablet/ Mini PC FDU070S-R01
FDU070S-R01 is an all-in-one tablet or mini PC designed by Forlinx based on SoM FET1052 -C. It operates at speeds up to 528MHz to provide high CPU performance and best real-time response, which can be flexibly configured as TCM or general-purpose on-chip RAM.
The FDU070S-R01 is integrated with peripherals such as RS485, RS422, RS232, CAN, USB, Ethernet, TF card, 2Kbit EEPROM, 64Mbit QSPI NOR Flash, RTC, speaker and buzzer which are all ready-to-use. The display is a 7'' LCD with resolution of 1024x 600. OS support UcLinux, FreeRTOS, RT-Thread, Bare Metal.
▊ Hardware Features
| Overview of FET1052-C System on Module | |
|---|---|
| CPU | iMX RT1052 |
| Architecture | Cortex-M7 |
| Frequency | 528MHz |
| RAM | SRAM 512KB; SDRAM 16MB/32MB |
| Flash | QSPI Nor Flash 4MB/16MB |
| OS | Bare metal, FreeRTOS, uCLinux, RT-Thread |
| Power In | 5V |
| Dimensions | 31mm×43mm |
| PCB | thickness 1.6mm, 4-layer PCB, ENIG |
| Package | board to board connector, 2*80pin, pitch 0.8mm |
| Working Temperature | -40℃~+85℃ |
| FET1052-C System on Module Features | ||
|---|---|---|
| Interface | QTY | Spec. |
| LCD | 1 |
up to RGB888, resolution up to 1366* 768*(WXGA), 480*x 272 and 800* 480 are available |
| CAMERA | 1 |
8-bit DVP, up to 5.0MP |
| SD/MMC/SDIO | ≤2 |
SD card or SDIO card with 1-bit or 4-bit mode |
| USB | 2 |
1x USB2.0 OTG(up to 480Mbps), 1x USB2.0 host, integrated with HS USB Phy |
| SAI | ≤3 |
up to 3x IIS audio |
| SPDIF | 1 |
Sony/ Philips digital audio interface |
| UART | ≤8 |
each up to 5.0Mbps |
| SPI | ≤4 |
full duplex enhanced sync. serial interface, up to 52Mbit/s, it could be configured to host/ device mode, four chip selections are available IIC≤4 |
| IIC | ≤4 | |
| Ethernet | ≤1 | 10/100Mbps auto-negotiation |
| PWM | ≤32 | 32x PWM |
| SWD | supported | |
| KeyPad | supported | 8*8 |
| QSPI | 2 | |
| CAN | ≤2 | CAN 2.0B |
| ADC | ≤20 |
2x 12-bit ADC, up to 20 input channels |
| SEMC BUS | 1 |
16-bit parallel bus |
▊ Software Features
| Bare Metal DEMO | ||
|---|---|---|
| gpt | lpi2c | |
| pit | kpp | |
| PWM | enc | |
| BEE | ||
| rtwdog | sai | |
| ewm | lpspi | |
| dcp | enet | |
| snvs | flexspi | |
| src | sdcard | |
| trng | sdcard_fatfs | |
| cache | edma | |
| flexcan | tsc | |
| gpio | usb(HOST, OTG) | |
| gpio | semc | |
| adc | csi:CMOS | |
| adc_etc | elcdif | |
| cmp | PXP | |
| qtmr | emwin | |
| lpuart(UART2) | flexram | |
| uCLinux Demo | ||
| build up of compiling environment | Ethernet | |
| Compile application | UART | |
| Make file system image | LED GPIO OUT | |
| TF card booting/ iamge flashing | User key | |
| micro SD/TF card driver | LCD FrameBuffer | |
| USB HOST | Tsc resistive touching | |
| USB OTG | RTC | |
| I2C EEPROM | ||
| FreeRTOS Demo | ||
| lpi2c | Lwip | |
| event | queue | |
| mutex | sem, sem_static | |
| swtimer | tickless | |
| generic | ||
| RT-Thread Demo | ||
| read and write file system | UART testing | |
| gpio | enet | |
| i2c | rtc | |
| spi | LCD/resistive touch screen/emwin testing | |
▊ Accessories
Provides the modules and accessories used in Forlinx's SBC.
See here for communication modules, LCD screen, SBC expansion module and further accessories »
Technical Support
Forlinx provides software resources including kernel and driver source code, together with detailed user manual(i.MX RT1052 reference manual), schematic documentations to help customer start their development rapidly.
For more details on solution design with FET1052-C SOM
▊ How to buy
1. Order Online
We have an online store on Alibaba, please contact us to start ordering
2. Order offline
Pls send your inquiry to our mailbox [email protected];
3. Payment Terms
Samples(100% T/T in advance),Bulk Order(please contact with our sales)
▊ Shipment
1. Delivery: Goods will be sent out by express as requested
2. Lead time: generally, goods could be sent out within five working days for a sample order, for a bulk requirement order, please contact us to check stock status and estimated delivery time.
3. Shipping charge: buyers should bear related shipping cost.
▊ Other Forlinx iMXRT Series Products
Architecture: Cortex-M7
Frequency: 528MHz
RAM: 1MB on-chip SRAM
ROM: 4MB QSPI NorFlash(16MB optional)
System: FreeRTOS，RT-Therad，Bare Metal
Architecture: Cortex-M7
Frequency: 528MHz
RAM: 1MB on-chip SRAM
ROM: 4MB QSPI NorFlash(16MB optional)
System: FreeRTOS，RT-Therad，Bare Metal
Architecture: Cortex-M7
Frequency: 528MHz
RAM: 512KB SRAM ，16MB SDRAM，32MB SDRAM(optional)
ROM: 4MB QSPI NorFlash(16MB optional)
System: UcLinux，FreeRTOS，RT-Therad，Bare Metal
