Innovative and Promising i.MX91 SoM Is Coming
It's honored for Forlinx for the witness and interaction with NXP for the the announcement of i.MX91 SoC a new promising applications processor. As NXP's Gold Partner, Forlinx has kept close touch and communication with NXP since the initial programming of the i.MX91 SoC. As NXP's newest highlight SoC, it's introduced that the i.MX91 SoC delivers an optimized blend of the security, scalability, features, and performance required to enable the next generation of long-life, cost-optimized, and flexible Linux controller platforms for IoT and Industrial applications.
‘i.MX 91 Family X Ecosystem = IoT’ quoted by Robert Thompson the Director of Secure Connected Edge Ecosystem at NXP Semiconductors. We do believe that the premiere of i.MX91 SoC will broaden more users with advanced, cost-optimized and high-security solutions. Here we are pleased to introduce and take you all have a forward-looking at the features of the upcoming i.MX91 based SoM FET-MX91xx-C.
|
|
|
| iMX91xx SoM Front | Back |
| FETMX91xx-C System on Module Features | ||
|---|---|---|
| SoC |
NXP i.MX91X MPU: 1×Cortex-A55@ 1.4GHz |
|
| RAM | 1GB LPDDR4 | |
| ROM | 8GB eMMC | |
| Voltage input | DC 5V | |
| Operating temp | -40~ +85℃ | |
| Package | Board-to-board connector(2*100-pin, 0.4mm pitch, combined height 1.5mm) | |
|
Interface |
QTY |
Spec. |
|
LCD |
1 |
Parallel RGB888, up to 1366×768p60 or 1280×800p60 |
|
Ethernet |
≤2 |
2x RGMII Transmission rate 10/100/1000 Mbps, complies with IEEE 802.3 |
|
UART |
≤8 |
Baud rate up to 5Mbps Supports serial data transceiver configuration, including programmable parity bit |
|
CAN-FD |
≤2 |
Supports CAN-FD and CAN 2.0B |
|
USB |
≤2 |
Two USB2.0 controllers integrated with PHY |
|
SD |
≤1 |
Complies with SD3.0 Supports SDR up to 200MHz and DDR up to 50MHz |
|
SDIO |
≤1 |
SDIO3.0 |
|
SAI |
≤3 |
A Synchronous Audio Interface (SAI) is available SAI1 supports 2 lanes, SAI2 supports 4 lanes, and SAI3 supports 1 lane Support full-duplex serial with frame synchronization, such as I2S, AC97, TDM and codec/ DSP |
|
PDM |
1 |
24-bit, supports linear phase response and AOP MIC |
|
Camera |
1 |
8-bit parallel camera interface |
|
SPI |
≤8 |
Supports to configure master or slave mode |
|
I2C |
≤8 |
Rating up to 100Kbit/s in standard mode, and 400Kbit/s in fast-speed mode, 1000Kbit/ s in enhanced fast-speed mode, 3400Kbit/s in high-speed mode, and 5000Kbit/s in super fast speed mode |
|
I3C |
≤2 |
2 Improved I3C; Support 400Kbit/s fast mode and 1000Kbit/s fast mode enhanced version, and backward compatible with I2C Support up to 12.5M clock rate, support HDR-DDR mode |
|
ADC |
≤4 |
12-bit 4-lane 1MS/s ADC |
| Get the Price | ||
In the coming years, Forlinx will continue to explore and build together with NXP for more comprehensive and reliable ecosystem. Let’s expect together for a more innovative IoT world.
