OK-G2LD-C Single Board Computer
OK-G2LD-C SBC carries high-performance and ultra-efficient processor Renesas RZ/G2L, which is Cortex-A55, 1.2GHz, and integrates a MCU Cortex-M33, 200MHz. It’s split design of SoM+Carrier Board, which is convenient for user secondary development. And it adds EMC protection reference design for RS485, CAN, which simplifies user design and facilitates on-site evaluation and testing. It is applicable to industrial, medical, electric power, transportation and other pan-industrial application scenarios.
- Rich interface resources, 2x 1000Mbps Ethernet (GMAC), 2x CAN-FD, 7x UART, USB 2.0, SPI, IIC, MTU, ADC, etc.
- Multi-function timer pulse unit, supports Toggle, PWM, complementary PWM and reset synchronous PWM modes, supports dead time compensation counter function;
- Multiple display interfaces MIPI-DSI, RGB, up to 1920x1080;
- Onboard QSPI Flash, separate storage of uboot, more stable;
- Safe and reliable from Renesas’ technical accumulation of Automotive Electronics.
Industrial Grade Core Board
All components of FET-G2LD-C core board are industrial-grade temperature, including CPU, RAM, ROM,
resistors, capacitors, inductors, connectors, operating temperature -40°C~+85°C. Thus it can easily cope with various harsh scenarios.
10+ Product Service Life
RZ/G2L has a 10-year+ life cycle guarantee,
and its Linux kernel is the super long-term support (SLTS) Kernel maintained by CIP, escort the long life cycle of customer products.
Rich Interface Resources, Wider Application Scenarios
FET-G2LD-C SoM is very ease of use and versatility with rich peripheral interface resources,
like 2 Gigabit Ethernet controllers, 2 CAN-FD, 2 USB 2.0, 7 UART , MIPI-DSI, Parallel RGB, MIPI-CSI, DVP, SD, IIS, IIC, SPI, QSPI, PWM, ADC, etc.
Rich Multimedia Resources
Rich display, camera and audio interface resources to meet the requirements of HMI and image acquisition. And it has a 3D GPU and video hardware
codec VPU to improve HMI experience; VPU hardware codec supports H.264 1920x1080x30fps Mali G31@500MHz, 3D GPU supports Vulkan, OpenGL, OpenCL.
Multi-function Timer Pulse Unit, MTU3a Enchantments
Its timer resources include 1-channel 32-bit MTU3*, 8-channel 16-bit MTU3*, 8-channel 32-bit PWM*, and 3-channel watchdog*.
The integrated Multi-Function Timer Pulse Unit 3, MTU3a, consists of eight 16-bit timer channels and one 32-bit channel.
It can realize PWM complementary input and output for encoder signal input and motor control.
FET-G2LD-C SoM is applicable to industry, healthcare, electric power, vehicle transportation, security, energy and chemical industry, communication, industry and so on.
OK-G2LD-C SBC Interface
OK-G2LD-C SBC consists of FET-G2LD-C SoM and carrier board. It integrates rich functional interfaces and makes product evaluation easier.
▊ Product Video
Single board computer demo based on Renesas RZ/G2L
FETG2LD-CSoM Basic Parameters
Renesas RZ/G2L (R9A07G044Lxx)
MPU Core: Arm [email protected], 1-core or 2-core
MCU Core: Arm Cortex-M33@200MHz, 1-core
• Arm Mali-G31
• OpenGL ES 1.1/2.0/3.1/3.2, Vulkan 1.1, OpenCL 2.0
VPU: Encoding / Decoding
• H.264 / AVC (High Profile / Main Profile / Baseline Profile)
• H.264 / MVC (Stereo High Profile)
• up to 1920 x 1080 x 30 fps
• image input up to 5M (2800×2047)
• image output up to Full HD (1920×1080)
• Support color format conversion
• RGB / ARGB / YcbCr422 / YcbCr420 / RAW(Grayscale)
|RAM||1GB / 2GB DDR4|
QSPI NorFlash: 16MB
eMMC: 8GB / 16GB optional
|Working Voltage||DC 5V|
|Package||board to board connector(3*80pin Spacing 0.5mm, height 2mm)|
|Dimensions||38mm x 60mm|
FET-G2LD-C SoM Function Parameter
One 4-lane MIPI display serial interface, each lane supports up to 1.5 Gbps
Up to 1920 x 1080@60fps
|Pin multiplexing interface, choose one|
|Parallel RGB||1||One parallel display interface, up to WXGA (1280x800@60fps)|
|MIPI-CSI||2||two 4-lane MIPI camera serial interfaces, 4lane up to 4000Mbps||Pin multiplexing interface, choose one|
Support ITU-R BT.656 (support Interlace, YcbCr422 8-bit/10-bit)
Support HD, 30 fps (YCbCr422 Interleave), 60 fps (YCbCr422 Y/CbCr separate data, binary data)
Maximum input pixel clock: 74.25MHz
Input data format: YcbCr422 8-bit / 10-bit; Binary data 16-bit.
|USB HOST||1||USB 2.0 (up to 480 Mbps)|
|USB OTG||1||USB 2.0 (up to 480 Mbps)|
|QSPI||1||maximum clock frequency: 50 MHz (Quad-SPI DDR), 66 MHz (Quad-SPI SDR), 100 MHz (Octal-SPI, HyperFlash)|
|SD||1||1-bit / 4-bit SD bus, support default, high speed, UHS-I/SDR50, SDR104 transmission mode|
|Audio||≤4||Support I2S, mono, tdM mode|
IEEE802.3 PHY RGMII and IEEE802.3 PHY MII
|CAN FD||≤2||CAN-FD ISO 11898-1 (CD2014), up to 4Mbps|
Support master mode and slave mode, support multi-master operation, support timeout detection
Support 7bit and 10bit slave address format
Supports separate 16-byte FIFO registers for transmit and receive
Support full duplex mode
Supports modem control functions (channels 0, 1 and 2 in asynchronous mode)
Support modem control function
Selectable Clock Synchronous Mode, Asynchronous Mode or Smart Card Mode
Encode and decode IrDA communication waveforms according to IrDA 1.0 (on channel 0)
Supports master mode and slave mode
Programmable bit length, clock polarity, clock phase selectable
up to 50 Mbps
Multi-function Timer Pulse Unit 3
Supports Toggle, PWM, Complementary PWM and Reset Synchronous PWM modes
Support dead time compensation counter function
Digital filter function supporting input capture and external count clock pins
General PWM Timer
Support counting up or down (sawtooth wave), counting up or down (triangle wave)
Independently selectable for each channel, 2 input/output pins per channel
WDT CH0: WDT to check the operation of Cortex-A55-CPU Core0
WDT CH1: WDT to check the operation of Cortex-A55-CPU Core1
WDT CH2: WDT to check the operation of Cortex-M33 CPU
Input voltage: 0V~1.8V
Conversion Time: 1us
Operation Mode: Single Scan/Continuous Scan
A/D conversion start condition:
· Software trigger
· Asynchronous trigger (support external trigger)
· Synchronous triggering (MTU and PWM timers)
|OK-G2LD-C SBC Function Parameter|
The carrier board leads out 4 lane MIPI_DSI through FPC socket;
default adaptive Forlinx 7-inch MIPI screen, resolution 1024 x 600@30fps
Reserve support Forlinx MIPI-DSI to LVDS & HDMI module;
Lead out through 26Pin FPC socket and 2 x 10Pin 2.0mm sockets;
Support OV5645, up to 2592X1944
|USB Host||2||Two USB 2.0 extended by the hub (up to 480 Mbps)|
|USB OTG||1||USB2.0 lead out through USB Type-C( up to 480 Mbps)|
WiFi: IEEE 802.11b/g/n 2.4GHz
Bluetooth: BT V2.1/BT V3.0/BT V4.0
|4G||1||Support 4G module EC20 by default|
|QSPI||1||One QSPI Flash chip on QSPI1 to store user data|
|TF Card||1||The carrier board leads out SD signal through TF card holder, which can mount TF Card|
WM8960 default onboard;
Support headphone output and MIC input, integrated on one 3.5mm headphone jack;
Support two 1W8Ω speaker output, lead out through XH2.54 white terminal
|CAN||2||CAN-FD with Electrical isolation|
|RS485||1||Automatic control of sending and receiving direction, with electrical isolation|
|I2C||3||to mount audio, RTC, camera and other equipment on carrier board|
|PWM||1||adjust backlight brightness|
|RTC||1||Independent RTC chip onboard. The time will be recorded by button battery when carrier board is powered off.|
|SCIF(UART)||1||Lead out through 2.54mm pins|
|SPI||3||Lead out through 2.54mm pins|
Lead out through 2.54mm pins
ADC_CH4 is additionally connected to a sliding rheostat to facilitate user debugging
|JTAG||1||Lead out through 1.27mm pins|
Provides the modules and accessories used in Forlinx's RZ/G2L SBC.
See here for communication modules, LCD screen, SBC expansion module and further accessories »
|4G Module||OV5645 Camera||7-inch MIPI Screen|
Forlinx provides software resources including kernel and driver source code, together with detailed user manual, schematic documentations to help customer start their development rapidly.
Forlinx provides embedded hardware reference manual, embedded software reference manual, including Renesas RZ/G2L embedded software Android system reference manual, and Linux system reference manual.
For more details on solution design with OK-G2LD-C SBC
▊ How To Buy
1. Order Online
We have an online store on Alibaba, please contact us to start ordering
2. Order offline
pls send your inquiry to our mailbox [email protected];
3. Payment Terms
Samples(100% T/T in advance),Bulk Order(please contact with our sales)
1. Delivery: Goods will be sent out by express as requested.
2. Lead time: generally, goods could be sent out within five working days for a sample order, for a bulk requirement order, please contact us to check stock status and estimated delivery time.
3. Shipping charge: buyers should bear related shipping cost.
▊ Related News
- New Arrival | Forlinx Released FET-G2LD-C SoM
- Development Board OK-G2LD-C Tests of Storage Read/Write Speed and Gigabit Ethernet Bandwidth
- G2L Series SoM - RZ/G2L Overview
- Forlinx RZ/G2L System on Module and SBC Evaluation
▊ Other Forlinx Hot Products
RAM: 1GB/2GB DDR4
ROM: 16MB QSPI NorFlash，8GB/16GB(Optional)
RAM: 2GB/4GB LPDDR4
ROM: 16GB eMMC
System: Linux5.4.70+Qt5.15, Android 11
RAM: 1GB LPDDR4
ROM: 8GB eMMC
System: Linux 5.15.52+Qt 6.3.2
RAM: 1GB/2GB DDR4-1600(regular with 1GB)
ROM: 8GB eMMC
System: Linux 5.15.52+Qt 6.3.2