Forlinx Embedded FET113i-S SoM Launched
Ultra-low price, ultra-flexible, ultra-versatile! Forlinx Embedded FET113i-S SoM is officially released!
FET113i-S System-on-Module (SoM) features the Allwinner T113-i processor, boasting a 1.2GHz main frequency and combining dual-core Cortex-A7 CPU, 64-bit XuanTie C906 RISC-V CPU, and DSP. It delivers robust computing power, versatile multimedia capabilities, and ample interface options. With a durable stamp hole design maximizing processor core accessibility, it’s an ideal cost-effective solution for industrial, power, and transportation sectors.
▊ Ultra-competitive Industrial Processors
Unlike the T113-S3, the T113-i from Allwinner Technology is an industrial-grade processor, operating at temperatures from -40℃ to +85℃, with flexible memory expansion and a 1.2GHz main frequency, suitable for most industrial performance needs.
▊ ARM+RISC-V+DSP, Multi-core Simultaneous Operation
FET113i-S SoM supports software-controlled activation and deactivation of cores, enabling simultaneous operation of A7, RISC-V, and DSP cores. DSP is for multimedia and digital signal processing, while RISC-V suits high real-time performance, offering versatile usage.
▊ Rich Interface Resources
T113 excels in multimedia capabilities, supporting H.265 (4K@30fps), MPEG-4 (1080p@60fps), and JPEG (1080p@60fps) decoding, as well as JPEG/MJPEG (1080p@60fps) encoding. It offers rich interface options, including 8-bit parallel CSI and CVBS video inputs, and CVBS, RGB, dual-channel LVDS, and four-channel MIPI DSI video outputs. With DSP support, it suits audio applications too.
▊ Outstanding Multimedia Audio and Video Capabilities
FET113i-S SoM supports various full-format decoding, including H.265 (4K@30fps), MPEG-4 (1080p@60fps), JPEG (1080p@60fps), as well as JPEG/MJPEG (1080p@60fps) encoding. It offers multiple interface options, including 8-bit parallel CSI and CVBS video inputs, and CVBS, RGB, dual-channel LVDS, and four-channel MIPI DSI video outputs. Additionally, with DSP support, it is also suitable for audio-related applications.
▊ Application Scenarios
▊ OK113i-S Development Board Interfaces
▊ Specifications and Parameters
|
FET113i-S SoM Basic Features |
|
|---|---|
|
CPU |
Allwinner T113-i CPU: T113-i VPU:
• Video Decoding: • Video Encoding: JPEG/MJPEG up to 1080p@60fps RISC-V: C906@1008MHz DSP: 600MHz |
|
RAM |
512MB/256MB DDR3 |
|
ROM |
8GB eMMC/256MB SPI Nand Flash |
| Voltage input | DC 5V |
|
Operating temp |
-40℃~+85℃ |
|
Package |
Half-hole soldering(146 pins, 1mm pitch) |
|
OS version |
Linux5.4.61 |
|
Firmware installation |
• TF card • USB OTG |
|
FET113i-S SoM Functional Parameters |
|||
|---|---|---|---|
|
Peripheral |
QTY |
Spec. |
|
|
RGB_LCD |
1 |
DE/SYNC, up to 1920x1080@60fps |
Muliti-plexed and alternative |
|
LVDS |
1 |
Single link, up to 1366×768@60fps; Dual link, up to 1920×1080@60fps |
|
|
MIPI-DSI |
1 |
4-lane, up to 1920×1200@60fps |
|
|
CVBS_OUT |
1 |
Supports NTSC and PAL, 10-bit pixel depth, YUV444 and HV output forms, up to 4K@60Hz |
|
| CSI | 1 |
8-bit digital camera, up to 148.5MHz |
|
| CVBS IN | 2 | Supports NTSC and PAL, 10-bit video ADCs | |
| Audio out | 2 | A pair of stereo headphone output, a pair of differential Lineout | |
| Audio in | 5 |
Three differential/ single MIC, a stereo LINEIN input, a stereo FMIN input |
|
| IIS | ≤3 | Host/ slave mode optional, sampling rate 8kHz to 384kHz | |
| DMIC | 1 |
PDM MIC, sampling rate 8kHz to 48kHz |
|
| OWA | 1 |
S/PDIF |
|
| USB DRD | 1 | Host mode up to 480Mbit/s, slave mode up to 480Mbit/s | |
| USB Host |
1 |
Host mode up to 480Mbit/s | |
|
EMAC |
1 |
10/100/1000 Mbit/s, supports RGMII and RMII | |
| UART |
≤5 |
Up to 4Mbit/s, except for DEBUG UART, there are 5 UART for users | |
|
SPI |
1 |
SPI0-SPI1, SPI0 is used by SoM, so only SPI1 can be used by users, SPI1 supports both SPI mode and DBI mode | |
|
TWI |
≤3 |
TWI0-TWI3, compatible with I2C, up to 400 kbit/s, TWI3 is used by SoM and not available | |
|
CIR |
1 |
Supports 1x infrared RX and 1x infrared TX | |
|
PWM |
≤7 |
PWM0-PWM7, PWM7 is used by SoM, output rating from 0 to 24MHz or 100MHz | |
|
GPADC |
≤2 |
SAR ADC, 12-bit resolution, 8-bit accuracy, sampling rate up to 1MHz, sampling power up to 1.8V | |
|
TPADC |
1 |
4-wire resistive touching panel input detecting | |
|
LRADC |
1 |
Low speed ADC input, for key detecting | |
|
CAN |
2 |
CAN2.0B | |
|
SD |
2 |
SDC0 is only available for 3.3V IO, it’s configured to SD card, SDC1 is only available for 3.3V IO | |
|
JTAG |
1 |
2x 5 pin headers with pitch of 2.0mm | |
