i.MX6 Series

FETMX6Q-C System on Module

Cortex-A9 i.MX6 Quad core processor;

1x 1000M Ethernet;

RAM:1GB DDR3 (2GB DDR3 optional);

FETMX6ULL-S System on Module

FETMX6ULL-S system on module is based on NXP Cortex-A7 low power featuring processor [email protected] 800MHz, it has two native Ethernet ports, two CAN controller and eight serial ports, both industrial grade and expanding commerce grade are optional to users, and the SoM is well supported with Linux4.1.15 with QTGUI.

FETMX6UL-C1 System on Module

NXP i.MX6Ultra Lite

FETMX6UL-C2 System on Module

FETMX6UL-C2 is an industrial grade SoM based on NXP i.MX6 Ultra Lite microcontroller belongs to Cortex -A7 and is with main frequency of 528MHz, 256MB LvDDR3 and 256MB NAND Flash, the CPU module is with a couple of board-to-board connectors each with 80pins. Unique PMU design makes it lower power consumption than ARM 9 products. It's approved to work stably under environment temp ranges from -40℃ to +85 ℃.

FETMX6DL-S System on Module

NXP i.MX6DL based System on Module FETMX6DL-S FETMX6DL is a Cortex-A9 featuring system on module based on NXP i.MX6DL processor with frequency up to 1.2GHz, designed with 8-layer EING PCB. Edge soldering package takes it perfect electronical ch

FETMX6Q-S System on Module

NXP i.MX6Q based System on Module FETMX6Q-S FETMX6Q is a Cortex -A9 featuring system on module based on NXP i.MX6Q processor with frequency up to 1.2GHz, designed with 8-layer EING PCB. Edge soldering package takes it perfect electronical char

FETMX6DL-C System on Module

Cortex-A9 architecture, 1x 1000M Ethernet, 2x CAN, 5x SPI, 1x mini PCIe.