FETMX8MPx-C System On Module
CPU: NXP i.MX 8M Plus Quad (QuadLite optional)
Architecture: 4x [email protected]+1x Cortex-M7@800MHz
Frequency: 1.6GHZ
RAM: 1GB/2GB/4GB LPDDR4
ROM: 8GB/16GB eMMC
System: Linux5.4.70, Android 11，Linux 6.1.36
FETMX8MPx-C System on Module Powered by NXP i.MX 8M Plus for AI, Vision, and Industrial Automation
The FETMX8MPx-C System on Module (SoM) / Computer on Module integrates the NXP i.MX 8M Plus processor, offering powerful performance for applications in AI, machine learning, vision, and industrial automation. Built to meet the demands of smart cities, industrial IoT, smart healthcare, and intelligent transportation, this SoM provides an ideal solution for the next generation of embedded systems. For a complete list of iMX8M products, please refer to the Forlinx iMX8M System on Module product family.
Key Features & Advantages:
-
High-Performance Processing:
- Quad-core or dual-core Arm Cortex-A53 processor at 1.6 GHz
- Neural Processing Unit (NPU) with up to 2.3 TOPS for AI and machine learning tasks
-
Advanced Vision Capabilities:
- Built-in Image Signal Processor (ISP) for high-quality image processing
- Dual-camera inputs for efficient vision-based applications
-
Real-Time Control & Robust Communication:
- Cortex-M7 core for real-time control in industrial and automation environments
- Dual CAN-FD, dual Gigabit Ethernet, and Time-Sensitive Networking (TSN) for synchronized communication
-
Multimedia Processing:
- Supports H.265 video encoding/decoding and 3D/2D graphics acceleration
- Advanced audio and voice functions for immersive multimedia experiences
-
High-Speed Connectivity:
- 2 x USB 3.0, 1 x PCIe 3.0, 2 x SDIO 3.0, 2 x CAN-FD
- Ideal for 5G networks, dual-band Wi-Fi, and high-speed industrial Ethernet
FETMX8MPx-C SoM
High-speed Communication Interface
4K Picture Quality and HiFi Voice Experience
The HDMI interface supports up to 4K display output, alongside LVDS and MIPI-DSI interfaces. It can drive up to three displays, either identical or different.The system integrates advanced audio technologies, including Cadence® Tensilica® HiFi 4 DSP @ 800 MHz, 6x I2S TDM, DSD512, S/PDIF Tx + Rx, 8-channel PDM microphone input, eARC, and ASRC.
Advanced Multimedia Technology
3D/2D Graphics Acceleration
Machine Learning and Vision
Built-in NPU, AI computing capability 2.3TOPS, meeting the needs of lightweight edge computing
Built-in Image Signal Processor (ISP)
High-Version and High-Stability Operating System
Product Applications
iMX8M Plus SoM/SBC Video
OKMX8MPx-C Single Board Computer Demo | iMX8M Plus NXP based
▊ Specifications
iMX8M Plus System On Module Basic Parameters |
||
|---|---|---|
| Product Name | FETMX8MPQ-C (default) | FETMX8MPL-C |
| CPU | NXP i.MX8M Plus Quad | NXP i.MX8M Plus QuadLite |
| Architecture | Quad-Core Cortex-A53, Single-Core Cortex-M7 | Quad-Core Cortex-A53, Single-Core Cortex-M7 |
| Frequency | 1.6GHz + 800MHz | 1.6GHz + 800MHz |
| RAM | 1/2/4GB LPDDR4 | 1/2GB LPDDR4 |
| ROM | 8GB / 16GB eMMC | 8GB / 16GB eMMC |
| GPU |
GC7000UL（3D） GC520L（2D） OpenGL、OpenCL、Vulkan |
GC7000UL（3D） GC520L（2D） OpenGL、OpenCL、Vulkan |
| NPU | 2.3 TOPS | —— |
| Video Hardware Decoding |
Resolution: 1080p60 Formats: VP8, VP9, H.264, H.265 |
—— |
| Video Hardware Encoding |
Resolution: 1080p60 Format: H.264, H.265 |
—— |
| OS Support | Linux5.4.70, Linux6.1.36 | Linux5.4.70 |
| Android11 | —— | |
| Working Voltage | 5V | 5V |
| Interface Mode | Ultra-thin board-to-board connector (4*80pin pitch 0.5mm) | Ultra-thin board-to-board connector (4*80pin pitch 0.5mm) |
| Working Temperature | -40℃~+85℃ | -40℃~+85℃ |
| Dimensions | 62mm × 36mm, Thickness 1.6mm, 8-layer ENIG PCB | 62mm × 36mm, Thickness 1.6mm, 8-layer ENIG PCB |
iMX8M Plus System On Module Function Parameters |
||
|---|---|---|
| Function | QTY | Parameters |
| USB | 2 |
The CPU contains 2 USB 3.0/2.0 controllers with integrated PHY; Host mode: Support Super-speed (5Gbit/s), high-speed (480Mbit/s), full-speed (12Mbit/s), low-speed (1.5Mbit/s). Device mode: SS/HS/FS |
| PCIE | 1 | Support 1 PCI Express Gen3. |
| MIPI_CSI | 2 | Provides two 4-lane MIPI camera serial interfaces, which can work up to 1.5 Gbps. |
| MIPI_DSI | 1 |
Provides a 4-lane MIPI display serial interface, which can work up to 1.5 Gbps. • 1080 p60 • WUXGA (1920x1200) at 60 Hz • 1920x1440 at 60 Hz • UWHD (2560x1080) at 60 Hz • WQHD (2560x1440) by reduced blanking mode |
| HDMI | 1 | Supports HDMI 2.0a display resolution up to 4Kp30Supports HDMI2.1 eARC |
| LVDS | 1 |
Single channel (4 lanes) supports 720p60 Dual asynchronous channels (8 data, 2clocks) support 1920x1200p60 |
| Ethernet | ≤2 | Ethernet ≤2 supports 2 RGMII interfaces, one of which supports TSN |
| SD | ≤2 | SD2, 4-bit, support 1.8/3.3V mode switching SD1, 8-bit, only support 1.8V mode |
| UART | ≤4 | The maximum baud rate supported is 4Mbps. |
| SPI | ≤3 | The maximum supported rate is 52Mbit/s, master-slave mode can be configured |
| I2C | ≤5 |
The highest rate supported in standard mode is 100Kbit/s; The highest rate supported in fast mode is 400Kbit/s. |
| CAN | ≤2 | The CAN FD protocol is used to implement the CAN communication controller, and the CAN protocol conforms to the CAN 2.0B protocol specification. (CAN FD requires CPU version support) |
| SAI | ≤6 | Synchronous Audio Interface (SAI), a full-duplex serial interface that supports frame synchronization, such as I2S, AC97, tdM, and codec/DSP interfaces. |
| SPDIF | ≤1 | A standard audio file transmission format, jointly developed by Sony and Philips. |
| PWM | ≤4 | With 16-bit counter; |
| QSPI | ≤1 | Has been occupied by the core board, connected to the 16MB Nor Flash |
| JTAG | 1 |
|
Note: The parameters in the table are hardware design or CPU theoretical values
| Product Name Description | |||
|---|---|---|---|
| FETMX8MP-C System On Module | General name of products for Forlinx external promotion | FETMX8MPQ-C System On Module | Quad-core processor, currently on sale. |
| FETMX8MPD-C System On Module | Dual-core processor, unreleased. | FETMX8MPX-C System On Module | The PCB is compatible with Quad-core and Dual-core (processors). |
| FETMX8MPL-C System On Module | i.MX8M Plus QuadLite Processor | ||
▊ Carrier Board
OKMX8MP-C Single Board Computer
Forlinx offers the OKMX8MP-C Development Board for evaluation of the FETMX8MP-C System on Module. The base board has taken the great computing and multimedia capabilities of the i.MX 8M Plus processor to provide dual Gigabit Ethernet ports, one with TSN, and WiFi/BT and M.2 B-key and mini-PCIe sockets with optional 5G and 4G modules.
The feature-packed board also offers media interfaces including HDMI 2.0a, LVDS, MIPI-DSI with optional touch screen, 2x MIPI-CSI with optional cameras and audio I/O. Other key interfaces include 2x USB 3.0, Type-C, serial and 2x CAN-FD.
Forlinx offers a design service to customize the base board to meet specific requirements.
▊ Accessories
Please click here to get more information about the supported modules and accessories.
▊ Documentation
Reference Manuals
Hardware Related
Product Datasheet
User Guide
Carrier Board Schematic
Carrier Board PCB
SoM Pinmux
Firmware Related
OS Image
Testing Demo
Source Code
Manual
Contact Us
Welcome to get in touch with us, our experts will reply to your email within 24 hours.
▊ How To Buy & Shipment
1. Order Online: We have an online store on Alibaba. Please contact us for details.
2. Order Offline: Send your inquiry to [email protected].
3. Payment Terms: 100% T/T in advance.
1. Delivery: Goods shipped by express upon receipt of payment.
2. Lead Time: Sample orders within 5 working days; bulk orders 6 weeks.
3. Shipping Charge: Buyers bear the shipping cost.
▊ Forlinx Recommended Products
Architecture: 2x [email protected]+1x Cortex-M33@250MHz
Frequency: 1.7GHz
RAM: 1GB LPDDR4
ROM: 8GB eMMC
Architecture: Heterogeneous，4*Cortex-A53+M4
Frequency: 1.8GHz
RAM: 2GB DDR4
ROM: 8GB eMMC
Architecture: 4*A53+M7
Frequency: 1.6GHZ
RAM: 2GB/4GB LPDDR4
ROM: 16GB / 32GB eMMC
Architecture: 6× [email protected] + 1x Cortex-M7@800MHz + 1x Cortex-M33@333MHz
Frequency: 333MHz ，800MHz，1.8GHz
RAM: 8GB LPDDR4x
ROM: 64GB eMMC
