FETMX8MM-C System on Module

CPU: i.MX8M Mini

Architecture: Heterogeneous,4x Cortex-A53+M4

Frequency: 1.8GHz

RAM: 2GB DDR4

ROM: 8GB eMMC

System: Linux4.14.78,Android9.0

Brief Message Compare

System on Module FETMX8MM-C based on i.MX8M Mini

FETMX8MM-C system on module (SoM) is based on NXP's i.MX8M Mini processor integrated with a quad-core Cortex-A53 processor up to 1.8GHz and a single-core Cortex-M4 co-processor up to 400MHz. The i.MX8M Mini SoC is built with advanced 14LPC FinFET process technology. This cutting-edge building block is tailor made for a wide range of IoT and industrial applications, featuring 2GB DDR4, 2 x USB 2.0, powerful network connectivity options including Bluetooth and optional WiFi, PCIe 2.0 and robust multimedia features including 7 audio channels (32bits), MIPI-DSI, and 1080p encoder and decoder.

It is NXP's first embedded multicore application processor built with advanced 14LPC FinFET process technology, delivering higher speeds and energy efficiency. i.MX8M Series is commercially and industrially certified and supported by NXP's Product Life Plan for any general industrial and IoT application.

Main features of i.MX8M Mini SoM

  • Heterogeneous Multi-core Processing Architecture;
  • Quad-core Cortex-A53 core up to 1.8GHz;
  • Cortex-M4 at speeds of 400+MHz;
  • 1080p video encode and decode;
  • Display and camera interfaces;
  • Multi-channel audio and digital microphone inputs;
  • Connectivity (I2C, SAI, UART, SPI, SDIO, USB, PCIe, Gigabit Ethernet);
  • Low-power and standard DDR memory support;
  • Multiple pin-compatible product offerings;
  • Support Android9.0 and Linux4.14(QT5.10);

Superior Performance cool experience

Based on ARM Cortex-A53 quad-core processor iMX8M Mini@ 1.8GHz,
with 2GB DDR4, high performance and powerful hashrate make system running more smoothly

Cortex-A53 i.MX8M mini SoM system on module
Cortex-A53 i.MX8M mini SoM system on module
i.MX8M SoM single board computer pc
i.MX8M SoM single board computer pc

1080p60 H.265 decode, 1080p60 H.264 encode

Reduce band width occupancy rate VP9 and H.265 decoder can support 1080P@ 60Hz,
which is 50% more efficient, but bandwidth and capacity only 50% of H.264.

VP9, H.264 Pc
VP9, H.264 Pc Phone

Operating Systems: Linux4.14+Qt5.10.1, Android9.0

SoM FETMX8MM-C can support Android9.0 and Linux4.14(QT5.10)
64-bit systems, which can take users higher security and better human-machine interactive experience.

android9.0 linux4.14 QT5.10 development board Pc
android9.0 linux4.14 QT5.10 development board Pc Phone

Multiple Audio Interfaces

Support 5-ch SAI,IIS,AC97,TDM and S/DPIF digital audio interface,
suitable for Hi-fi Voice System and Speech Recognition.

IIS, AC97, TDM, SPDIF, SAI Pc
IIS, AC97, TDM, SPDIF, SAI Pc Phone

Power Optimized Design

The HMP architecture can reduce the power even more by letting the Cortex-A53 cores sleep until needed.
The Cortex-M4 can wake them up on demand.

Cortex-A53 1.6GHz Cortex-M4 Pc
Cortex-A53 1.6GHz Cortex-M4 Pc Phone

10 years of product longevity program

i.MX8M Mini processor's life time is more than 10 years, which ensures users of stability of product supplying.

i.mx8m single board computer development board Pc
i.mx8m single board computer development board Pc Phone

▊ iMX8M Mini SoM & SBC Video


Four Video Hard Decoding Demo Based on OKMX8MM-C SBC

▊ Hardware Features


Overview of FETMX8MM-C System on Module
CPU NXP i.MX 8M Mini
Architecture Quad-core Cortex-A53+ single core Cortex-M4
Main Frequency ≤1.8GHz
RAM 2GB DDR4
ROM 8GB eMMC
OS Linux4.14.78+Qt5.10.1, Android9.0
Voltage Input 5V
Package ultra thin connector(3*80pin, pitch of 0.5mm)
Working Temp Width 0℃~70℃, -40℃~80℃
Dimensions 56mm×36mm


FETMX8MM-C System on Module Features
Peripherals QTY Spec.
CAMERA 1 4-lane MIPI, up to 1.5Gbps
SD/SDIO ≤2 SD, SDIO, 1.8V mode and 3.3V mode
USB 2 USB 2.0( up to 480 Mbps), both can be configured to OTG
SAI ≤5 up to 5x SAI
UART ≤4 each up to 4.0 Mbps
eCSPI ≤3 full duplex strengthened synchronous serial interface, up to 52 Mbit/s, it can be configured to host/ slave mode
IIC ≤4 320Kbps
Ethernet ≤1 10/100/1000Mbps auto-negotiation
PWM ≤4 16-bit
JTAG supported
FlexSPI 1 support single pad/dual pad/quad pad mode
Display 1 4-lane MIPI display, up to 1.5Gbps
PDM ≤1 up to 4-wire 8 channels
PCIe 1 PCIe 2.0

▊ Carrier Board


OKMX8MM-C Single Board Computer

To minimize your development workload, we can provide starter kits that can be used as complete development platforms for evaluation and application development.

The OKMX8MM-C Single Board Computer from Forlinx is based on NXP i.MX8M Mini SoC and adopts a separate SoM+carrier board design. The tiny motherboard gives full play to the processor's capabilities, with 2GB DDR4, 8GB eMMC. It offers a wide range of peripheral interfaces such as MIPI-CSI, MIPI-DSI, USB, PCIe, UART, eCSPI, IIC and Gigabit Ethernet, and is widely used in medical inspection, machine vision inspection and management, machine learning and automotive multimedia, etc. and supports Linux 4.14.78 system. Featuring open system architecture design, it can provide technical information for your secondary development.

OKMX8MM-C Single Board Computer Features
Peripherals QTY Spec.
MIPI_DSI 1 4 data lanes, protocol V1.01r11; resolution up to WQHD(1920x1080p60, 24bpp)
MIPI_CSI 1 4 lanes; OV5640MIPI
Audio 1 1*MIC, 1*Phone, 2*Speaker
PDM 1 10-pin header with pitch of 2mm
SAI 1 26-pin header with pitch of 2mm
USB Host 2 expanded by hub, USB2.0( up to 480 Mbps)
USB OTG 1 standard micro USB connector, USB 2.0 OTG (up to 480 Mbps)
Ethernet 1 10/100/1000Mbps auto-negotiation, RJ-45 connector
Mini PCIe 1 can be mounted with 4G wireless module with mini PCIe interace, it also contains PCIe2.0 single channel
WiFi 1 Model: F23BUUM13-W2

WiFi standard: IEEE 802.11b/g/n ,2.4GHz

Bluetooth: V2.1+EDR/BT v3.0/BT v4.0

Bluetooth 1
TF Card 1 compatible with SD, SDHC and SDXC(UHS-I)
SDIO 1 20-pin header with pitch of 2mm, 8-bit
SPI 2 10-pin header with pitch of 2mm
QSPI 1 on-board 16MB QSPI NOR FLASH
PWM 1 display backlight adjusting
IIC 4 standard mode: 100kbits/s, fast speed mode: 320kbits/s
UART 1

UART3 is a 3-wire serial interface, 3.3V up to 4.0 Mbps

UART Debug 1 UART2, RS232, DB9 male connector, default baud rate is 115200 A53 Debug
1 UART4, 3.3V, by a 10-pin header with pitch of 2mm M4 Debug
RS485 1 isolated RS485, up to 500kbps
JTAG Debug 1

▊ Accessories


Please click here to get more information about the supported modules and accessories.

Optional Module
10.1-inch LVDS Screen
7-inch MIPI Screen
MIPI To HDMI/LVDS
MIPI To HDMI/LVDS

▊ Technical Support


1. Files to be provided after buying

Hardware related: datasheet, user guide, carrier board schematic, carrier board PCB, SoM pinmux;

Firmware related: OS image, testing demo, source code, manual;

Compiling environment

2. Fast response after-sale technical support service

Contact Us

Welcome to get in touch with us, our experts will reply to your email within 24 hours.

Reset

▊ How To Buy


1. Order Online

We have an online store on Alibaba, please contact us for details.

2. Order Offline

Please send your inquiry to [email protected];

3. Payment Terms

100% T/T in advance.

▊ Shipment


1. Delivery: Goods will be shipped by express upon the receipt of the payment;

2. Lead time: Goods will be shipped out within five working days for sample orders and 6 weeks for bulk orders;

3. Shipping charge: Buyers should bear the shipping cost.

▊ Related News


▊ Other Forlinx Hot Products


FETMX8MP-C System On Module
FETMX8MP-C System On Module
CPU: iMX8M Plus
Architecture: 4*A53+M7
Frequency: 1.6GHZ
RAM: 2GB/4GB LPDDR4
ROM: 16GB eMMC
System: Linux5.4.70+Qt5.15, Android 11
Learn More
imx8MQ System On Module
FETMX8MQ-C System on Module
CPU: i.MX8M Quad
Architecture: Heterogeneous,4*Cortex-A53+M4
Frequency: 1.3GHz
RAM: 2GB DDR4
ROM: 8GB eMMC
System: Linux5.4.3+ QT5.13.2
Learn More
imx8mp single board computer
OKMX8MP-C Single Board Computer
CPU: iMX8M Plus
Architecture: 4*A53+M7
Frequency: 1.6GHZ
RAM: 2GB/4GB LPDDR4
ROM: 16GB eMMC
System: Linux5.4.70+Qt5.15, Android 11
Learn More
Forlinx iMX8MM SBC
OKMX8MM-C Single Board Computer
CPU: i.MX8M Mini
Architecture: Heterogeneous,4*Cortex-A53+M4
Frequency: 1.8GHz
RAM: 2GB DDR4
ROM: 8GB eMMC
System: Linux4.14.78+QT5.10.1,Android9.0
Learn More