-
How To Do Android OTA Update for OKT507-C
How to perform Android OTA update for OKT507-C by compiling OTA upgrade pack, firmware, and generating complete and differential packs. The update can be done via TF card, U-disk, or ADB.
Details >
-
T507 SoM Applied in Fuel Dispenser Solution
SoM FET507-C is based on Allwinner automotive grade SoC T507 which has all the needed features for a fuel dispenser. The quad-core processor runs at a speed of up to 1.5GHz providing advanced computing performance for car license plate and facial recognition and other complicated algorithms applications.
Details >
-
How to Update Android Firmware OTA for OKT507-C
How to compile and package the OTA update package for the OKT507-C device. Including configuring the compilation environment, compiling firmware, packaging full and incremental OTA update packages, and the specific steps for OTA upgrade via TF card/USB or ADB.
Details >
-
How to Output PWM Squareware by OK1028A-C development board
Configure OK1028A‑C for PWM output via FTM7: update RCW pinmux, add DTS node & control via sysfs for precise 1 kHz square waves.
Details >
-
GPIO Multiplexed and Ethernet Subnet based on LS1028A Development Board
Explore the features of LS1028A, including GPIO multiplexing and Ethernet capabilities like TSN, on this development board.
Details >
-
Approach Triple Displays(Dual MIPI DSI CRT and One HDMI) by RK3399 Board
LCD Controller of Rockchip is called VOP(Video Output Processor), it integrates with 1~2 VOP. Only the chip which has two VOP can support dual-screen playing asynchronously.
Details >
-
Advance Hand in Hand | Forlinx Authorized as NXP Gold Partner
Founded in year of 2007, Forlinx has a professional R& D team have 15 years' experience in ARM® board hardware designing and system service and has 12 product series models launched and sales volume more than 1000K units based on NXP SoC since year of 2014.
Details >
-
RK3399 SoM (System on Module) Applied in Facial Recognition Solution
A facial recognition system has been used by communities, business buildings, and other public places for contactless temperature measurement, which can highly reduce people-to-people contact risk, improve efficiency, and cut down manual costs.
Details >
-
How Custom Display in Uboot for i.MX8MM Core Board
If users want to add a new display, just take the display datasheet and extra add a set of display parameters, set panel, appoint to use the added parameters(note: this is only for MIPI display that doesn't need initialization). As Forlinx uboot is not open, users can not do any change to source code, thus users can not add any display parameters.
Details >
-
How to Configure Dual Ethernet on OKA40i‑C Development Board
Configure dual 100 Mbps Ethernet on the OKA40i‑C dev board: learn hardware wiring, pin‑mux FEX settings, IP101 PHY setup, and flashing steps in one concise guide.
Details >
Current position：
Home / Search results
About 654 records of“” were found