-
OK4418-C2 Single Board Computer Applied in Hematology Analyzer
Hematology analyzer is a widly used modern medical device. When the device works, it needs to do series of operations of taking blood sample, sucking up, diluting, blending, transfering, inspecting and clearning, and then all data processed by a main board to get analytical result which could be saved and played on the analyzer device and also could be printed.
Details >
-
OK4418-C2 Single Board Computer Applied in Hematology Analyzer
Hematology analyzer is a widly used modern medical device. When the device works, it needs to do series of operations of taking blood sample, sucking up, diluting, blending, transfering, inspecting and clearning, and then all data processed by a main board to get analytical result which could be saved and played on the analyzer device and also could be printed.
Details >
-
Solar Stent Hardware Based on FET1052-C System on Module
FET1052-C system on module is based on i.MX RT1052 which is a Cortex-M7 featuring MCU from NXP, it integrates low-power, easy-going and high performance all-in-one. Frequency up to 528MHz and SRAM 512 KB(TCM), two options are available.
Details >
-
FETMX6UL-C System on Module Applied in Power Load Management Solution
Power load management terminal can read and collect, store, and transmission data about ammeter, demand, voltage, current, power rate, power factor, and voltage qualification rate.
Details >
-
FCU1301 Applied in Express Way Substation Dynamic Environment Monitoring Solution
2019-11-09 11:37:00
Dynamic Environment Monitoring
Provide a dynamic environment monitoring system to substation of express way, tolling booth or tunnel station, thus to do real-time monitoring, remote management, failure alarming, data inquiry and unattended.
Details >
-
FCU1301 Applied in Express Way Substation Dynamic Environment Monitoring Solution
2019-11-09 11:37:00
Dynamic Environment Monitoring
Provide a dynamic environment monitoring system to substation of express way, tolling booth or tunnel station, thus to do real-time monitoring, remote management, failure alarming, data inquiry and unattended.
Details >
-
FET1052-C System on Module Applied in FTU
2019-11-09 10:13:00
FTU
FTU is short for Feeder Terminal Unit, it consists of telecontrol,teleindication and failure detection, communicates with power distribution master station to provide power system status and other related information for monitoring purpose to switch status,power parameters, phase-to-phase fault, ground fault and fault parameters, and then adjust and control the leectrical distribution plant by the command from master station.
Details >
-
FET1052-C System on Module Applied in FTU
2019-11-09 10:13:00
FTU
FTU is short for Feeder Terminal Unit, it consists of telecontrol,teleindication and failure detection, communicates with power distribution master station to provide power system status and other related information for monitoring purpose to switch status,power parameters, phase-to-phase fault, ground fault and fault parameters, and then adjust and control the leectrical distribution plant by the command from master station.
Details >
-
Partial Discharge Online Measurement and Monitoring Instruments Solution based on FET1052-C
Partial Discharge Online Measurement and Monitoring Instruments Solution based on FET1052-C
Details >
-
Partial Discharge Online Measurement and Monitoring Instruments Solution based on FET1052-C
Partial Discharge Online Measurement and Monitoring Instruments Solution based on FET1052-C
Details >
Current position：
Home / Search results
About 654 records of“” were found