FETMX8MP-C System on Module(SoM) based on NXP iMX8M Plus processor, with a Neural Processing Unit (NPU) operating at up to 2.3 TOPS.

FETMX6Q-C system on module based on NXP/Freescale Cortex-A9 i.MX6 quad core processor with main frequency up to 1.2GHz, this SoM is with 320 pins and it is designed with 12-layer ENIG PCB, supports a variety of display screen interfaces and image collectors.

The FET335xS-II SoM is based on the TI Cortex-A8 AM3354 industrial grade processor, with a main frequency of 600MHz and an industrial grade operating temperature range of -40℃~+85℃. It has the advantages of anti-vibration, anti-oxidation, anti-interference and low cost.

NXP LS1046A based Evk ARM Cortex-A72 Single Board Computer 10G Gigabit Industrial Router Edge Computing Gateway Can Support Two XFI.

Let me show you the advantage of the T507 development board, as well as the product floor plan, and the relative interfaces 2GB DDR3L and 8GB eMMC on board, LVDS, RGB, HDMI, WiFi, BT, 4G, MIPI-CSI, MIPI-DSI, etc. 

The OK6254-C development board is an independent testing and development platform. It is an industrial-grade design and has been tested for harsh ambient temperature, pressure, and long-term stability operation, and can run stably in various environments.

IoT gateway| FCU1104 is an embedded computer designed by Forlinx specially for IoT gateway related applications for wireless data acquisition and transmission. It integrates with 8* RS485/ RS232, 2* Ethernet, 4G(Cat.1/ Cat.4), WiFi, LoRa and other source all in one.

The FCU2201 cost-effective 5G industrial gateway is designed for industrial data acquisition and processing applications. It supports 5G, 4G, Ethernet, dual-band Wi-Fi, RS485, RS232 and other functions and interfaces. It can be used for uplink network access and connection of downlink sensors and other devices; it adopts ARM Cortex-A53 architecture processor with a main frequency up to 1GHz, can meet the performance requirements of local data processing, edge computing, etc.;

The FCU2303 embedded control unit (5G Smart Gateway 3.0) can provide users with high-bandwidth, low-latency, and large-connection services. The control unit is equipped with 8 independent MAC addresses of Gigabit Ethernet and 8 RS485. It is widely used in smart cities, smart factories, smart power, smart water, smart agriculture, security monitoring and other industries.

FDU070S-R01 is an all-in-one tablet or mini PC designed by Forlinx based on SoM FET1052-C which is based on NXP Cortex-M7 featuring processor i.MXRT1052. It operates at speeds up to 528MHz to provide high CPU performance and best real-time response. The i.MX RT1052 processor has 512 KB on-chip RAM, which can be flexibly configured as TCM or general-purpose on-chip RAM.

FIT-5G +A 5G Convert Module

Model: FIT-CAN-II_2515;
Interface: SPI;

Model: FIT-USB-100M V1.0;