FETT507-C System on Module

CPU: T507

Architecture: Cortex-A53

Frequency: 1.5GHz



System: Linux4.9+QT5.12

Datasheet Message Compare

FET T507 - C System on Module

FETT507-C system on module is based on Allwinner quad-core automative grade SoC T507 belongs to Cortex-A53 architecture runs at speed uo to 1.5GHz, and it integrates with G31 GPU, carries 2GB DDR3L and 8GB eMMC on-board. It supports most mainstream video and image codec forms. It has advantages of industrial grade, low power performance and plenty peripherals, can support Linux, Android and Ubuntu TBD very well, applicable for car electronics, power industry , medical, industrial control , IoT and all kinds of smart devices.

utomative grade SoC

FETT507-C system on module is based on automative grade SoC T507 certified by AEC-Q100, more than 10 years of longevity.

Allwinner automative SoC T507
Allwinner automative SoC T507

Advanced Performance

FETT507-C system on module is based on Cortex-A53 featuring quad-core SoC T507 running at speed up to 1.5GHz; Integrates with GPU G31 MP2; Carries 2GB DDR3 RAM and 8GB eMMC ROM on-board, can support Android, Linux and Ubuntu very well.

Allwinner T507
Allwinner T507

Ultra low power consumption and fanless

SoM designed based on low-power Cortex-A53 featuring SoC, CPU full-loaded consumption only 2.25W, which is applicable for fanless designing, allows device can long-term run stably.

Allwinner t507
T507 low power

Various functional peripherals

T507 peripherals
t507 interface

AHD camera input

Can support AHD input converted to MIPI-CSI, can support 4 AHD camera capture.

t507 AHD camera
t507 AHD camera

Multi video output interfaces

RGB, LVDS, HDMI and CVBS output interfaces are all supported, can support dual-screen playing synchronously and asynchronously

t507 display interface
t507 display interface

4K video output

Supports HDMI 2.0a, output resolution up to 4K.

t507 4K output
t507 4K output

Supports 4K hardware codec

t507 4K codec
t507 4K codec


Linux4.9+Qt5.12, Android10.0 and Ubuntu18.04 are all well supported and easy-to-go.

t507 system
t507 system

Target Applications

Applicable for car electronics, power industry, medical, IoT, industrial control, IoT and all kinds of smart devices.

t507 application
t507 application

Single Board Computer Pin Diagrams

development board based on t507 system on module
development board based on t507 system on module

▊ Specification

Overview of FETT507-C System on Module
CPU Allwinner T507
Architecture quad-core Cortex-A53 Freequency 1.5GHz
Working Temperature -40℃~ +85℃ Dimensions 40mm*70mm
Package ultra thin board-to-board connector Voltage input 5V

Linux4.9+QT5.12, Android10 , Ubuntu18.04 TBD

GPU G31 MP2 available for OpenGL ES 3.2/2.0/1.0,Vulkan1.1,OpenCL 2.0

FETT507-C System on Module Features
Peripheral QTY Spec.
TVOUT 1 CVBS output, NTSC mode and PAL mode


- 2D Video up to  [email protected]

- 3D Video up to [email protected]


-IEC60985 L-PCM unpressed audio form, up to 192 kHz;

-IEC61937 pressed audio form, up to 1536 kHz


LCD and LVDS are multiplexed;


- RGB(DE/SYNC) up to [email protected];

- Serial RGB/dummy RGB up to [email protected];

- i8080 up to [email protected];

- BT656 up to [email protected] or [email protected];

- RGB888, RGB565, RGB666;

- can support R/G/B separate Gamma correcting


- dual-lane up to [email protected]

- single-lane up to [email protected]


supports image tailoring;

supports MIPI Version 1.0;

up to 1.0Gbps/Lane;

video capturing rate up to [email protected] or 4*[email protected];


can support 8/10/12/16 bit DC;

supports BT656, BT601, BT1120;

supports ITU-R BT.656 TDM, up to  4*[email protected] id DDR sampling mode;

supports progress and interlace video input;

video capturing rate up to [email protected][email protected];

pixel clock up to 148.5MHz

USB2.0 4


- can support 1* OTG;

- High-Speed (HS,482), Full-Speed(FS,12Mbit/s) and Low-Speed (LS,1.5Mbit/s) in master mode;

- High-Speed (HS,482 Mbit/s) and Full-Speed  (FS,12Mbit/s) in slave mode


- can support 3* host;

- can support High-Speed (HS,482 Mbit/s),Full-Speed(FS,12Mbit/s) and Low-Speed(LS,1.5Mbit/s) devices

SD 2


- 4bit BUS width;

- SDR mode [email protected] IO pad;

- SDR mode[email protected] IO pad;

- DDR  mode [email protected] IO padSDHC1(SDIO3.0):

- 4bit BUS width;

- SDR mode [email protected] IO pad;

- DDR mode [email protected] IO pad

RMII 1 10/100Mbps auto-negotiation
RGMII 1 10/100/1000 Mbps auto-negotiation; RGMII could be multiplexed to RMII for dual fast Ethernet expanding

UART0, UART5: 2-wire, UART1, UART2, UART3, UART4:4-wire;

Comply with 16550 UARTs;

speed up to 4Mbit/s;

can support 5~8 data bit and 1/1.5/2 stop bit;

can support RS-485/9-bit mode

TWI ≤5 standard mode(up to 100kbit/s) and fast mode(up to 400kbit/s)
SPI ≤2 3-wire/ 4-wire SPI: up to 100MHz
SCR 1 ISO/IEC 7816-3:1997(E) and EMV2000(4.0)
PWM ≤6

3 couples of PWM: PWM01 consists of PWM0 and PWM1, PWM23 consists of PWM2 and PWM3, PWM45 consists of PWM4 and PWM5;

can support pulse(configurable), circle and complementary pair output;

can support capture input;

programmable dead zone output;

built-in programmable dead zone time generator, controllable dead zone time;

three types of output waves: continuous wave; pulse wave, complementary wave;

output reference range: 0~24MHz/100MHz; duty ratio: 0%~100%;

minimum resolution: 1/65536; supports PWM output and input interrupt


supports NEC data;

supports remote controller or wirelesss keyboard CIR;

64x8 bit FIFO for data buffer;

sampling clock up to 1MHz


can support 4 general purpose ADC, 12-bit resolution;

maximum sampling rate 1MHz;

can support data comprision and interrupt;

can support DMA transaction;

signal input range: 0~1.8V;

supports three working modes: single conversion, continuours conversion burst conversion


6-bit resolution

sampling rate up to 2kHz

supports hold Key and general Key

supports normal mode, continuous conduction mode and single work mode;

Power supply voltage: 1.8V

Power reference voltage: 1.35V, analog input

detected voltage range: 0〜LEVELB(maximum 1.266V)

LINEIN TBD 1 reserved, not available

supports dynamic range controller to adjust DAC playing;

2 DAC channels:

- can support 16-bit and 20-bit sampling rates;

- 8kHz ~ 192kHz sampling rate;

- 95±2db [email protected],-80±3db THD+N, output up to 0.55Vrms1 audio output:

- one differential LINEOUTP/N or single-end LINEOUTL/R


can support up to 8 digital PDM micphones;

can support sampling rate 8kHz to 48kHz

OWA 1 1* OWA sending
I2S ≤4

one built-in audio HUB;

supports 2 Digital Audio MIXER(DAM);

supports 3* I2S/PCM peripherals and 1* I2S/PCM for connecting internal HDMI;

supports left-justifying, right-justifying, standard I2S, PCM, tdM;

I2S supports 8 channels, 32-bit/192kbit sampling rate;

I2S and TMD mode up to 16 channels, 32-bit/96kbit sampling rate

▊ How to buy

1. Order Online

We have an online store on Alibaba, please contact us to start ordering

2. Order offline

pls send your inquiry to our mailbox [email protected];

3. Payment Terms

Samples(100% T/T in advance),Bulk Order(please contact with our sales)

▊ Shipment

1. Delivery: Goods will be sent out by express as requested

2. Lead time: generally, goods could be sent out within five working days for a sample order, for a bulk requirement order, please contact us to check stock status and estimated delivery time.

3. Shipping charge: buyers should bear related shipping cost.

▊ Related single board computer